[Fri Jan 6 10:47:48 2012] Detection parameters: Position = (282.0, 323.9) = 5 39 42.93 -69 41 16.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 289.0 +/- 30.8 Background counts = 213.7 Rate = 0.009 +/- 0.0009 [Fri Jan 6 10:47:49 2012] Off-axis axis estimate = 2.20' [Fri Jan 6 13:24:09 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting [Fri Jan 6 13:24:09 2012] Initial guess for spatial extent in simple fitting = 7.53" [Fri Jan 6 13:24:09 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.804 [Fri Jan 6 13:24:09 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 7.53" [Fri Jan 6 22:02:07 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_src19.ximg exists [Fri Jan 6 22:02:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_src19.csv [Fri Jan 6 22:02:07 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_src19_1.ximg exists [Fri Jan 6 22:02:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_src19.csv [Fri Jan 6 22:02:07 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_src19_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jan 6 22:02:08 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_tfrozen_src19.ximg exists [Fri Jan 6 22:02:08 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists [Fri Jan 6 22:02:08 2012] Fit fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly [Fri Jan 6 22:02:29 2012] Warning, spatial fit 19 centroid is now closest to src. 22 [Fri Jan 6 22:02:29 2012] Source 24 is offset by 5.100577 and -5.217793 pixels which is larger than 2 X fitted extent = 0.898460 x 0.898460, not incorporating fit results [Fri Jan 6 22:02:29 2012] Vigneting correction estimate = 1.000000 [Fri Jan 6 22:02:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jan 6 22:02:29 2012] Assessing source extent using major [Fri Jan 6 22:02:29 2012] Source does appear to be extended [Fri Jan 6 22:02:29 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jan 6 22:02:29 2012] Source is confused with source 22 [Sat Jan 7 02:28:56 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting [Sat Jan 7 02:28:56 2012] Initial guess for spatial extent in simple fitting = 7.53" [Sat Jan 7 02:28:56 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.804 [Sat Jan 7 02:28:56 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 7.53" [Sat Jan 7 09:46:17 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_src19.ximg exists [Sat Jan 7 09:46:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_src19.csv [Sat Jan 7 09:46:17 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_src19_1.ximg exists [Sat Jan 7 09:46:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_src19.csv [Sat Jan 7 09:46:17 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_src19_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jan 7 09:46:17 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_tfrozen_src19.ximg exists [Sat Jan 7 09:46:17 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists [Sat Jan 7 09:46:17 2012] Fit fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly [Sat Jan 7 09:46:30 2012] Spatial fit model total counts = 1939.070000, observed total counts = 1942.000000 [Sat Jan 7 09:46:30 2012] Offset between fit and detection position for source 24 = 6.396218 pixels [Sat Jan 7 09:46:30 2012] 1564.602000 total counts/ 1071.820000 bgd. counts: snr = 15.051990 Spatial fit parameters: Offset between fit and detection position for source 24 = 6.396218 pixels Position = (279.4, 329.8) = 5 39 45.06 -69 40 49.9 Extent = 13.3 (11.5-15.1)", rotation angle = 0 Source counts = 492.8 +/- 39.6 Background counts = 1071.8 Rate = 0.02 +/- 0.002 [Sat Jan 7 09:46:30 2012] Source 24 is offset by -2.855816 and 4.211747 pixels which is larger than 2 X fitted extent = 0.884005 x 0.884005, not incorporating fit results [Sat Jan 7 09:46:30 2012] Vigneting correction estimate = 1.000000 [Sat Jan 7 09:46:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jan 7 09:46:30 2012] Assessing source extent using major axis lower bound [Sat Jan 7 09:46:30 2012] Source does appear to be extended [Sat Jan 7 09:46:30 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jan 7 12:17:20 2012] XMMSAS src. selection expression = ellipse(24262.204000, 28639.942000, 795.006023, 795.006023, 0.000000, X, Y) [Sat Jan 7 12:17:20 2012] Writing source region out to fullrun_mos2_xmm0023940401_pi300-10000_pass1_cl_src24_src.reg [Sat Jan 7 12:17:20 2012] Extracting stamp from image fullrun_mos2_xmm0023940401_pi300-10000_cl_sm2.00.img.gz, (234, 284) - (325, 375) [Sat Jan 7 12:17:20 2012] XMMSAS bgd. selection expression = annulus(24262.204000, 28639.942000, 1325.010038, 2650.020076, X, Y) && !ellipse(24926.373600, 24138.928744, 3385.344097, 3385.344097, 0.000000, X, Y) && !ellipse(24074.660767, 24211.641693, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23804.410645, 25454.524628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23297.724000, 24570.641000, 2607.472075, 2607.472075, 0.000000, X, Y) && !ellipse(26653.955353, 25582.048340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23965.958557, 26660.022095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24337.587800, 28467.007200, 2400.656069, 647.454419, 75.471000, X, Y) && !ellipse(24198.776600, 29748.260400, 1300.208037, 412.852812, 263.821000, X, Y) && !ellipse(24161.208400, 30163.449200, 1046.912030, 1046.912030, 0.000000, X, Y) && !ellipse(27455.285675, 25862.642456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21271.121078, 26470.957458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23597.818000, 27456.550000, 2410.496069, 927.176027, 66.069000, X, Y) && !ellipse(25052.062012, 27857.265076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22256.756897, 29877.455627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26428.620000, 27093.820000, 2236.288064, 2236.288064, 0.000000, X, Y) && !ellipse(27904.048000, 25066.675200, 1205.600035, 1205.600035, 0.000000, X, Y) && !ellipse(23099.876000, 27954.920000, 1205.248035, 1205.248035, 0.000000, X, Y) && !ellipse(26953.640000, 27625.499800, 1138.072033, 1138.072033, 0.000000, X, Y) [Sat Jan 7 12:17:20 2012] Writing fullrun_mos2_xmm0023940401_pi300-10000_pass1_cl_src24.gif [Sat Jan 7 13:17:02 2012] Mean detx,y = (-64.57, -4504.58) [Sat Jan 7 13:17:03 2012] Setting backscal keywords in source and bgd. spectrum [Sat Jan 7 13:17:19 2012] Binned source spectrum to 10 counts/bin [Sat Jan 7 13:17:19 2012] Setting source spectrum file to fullrun_mos2_xmm0023940401_pi300-10000_pass1_cl_src24_src_b10.pi.gz [Sat Jan 7 13:17:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0023940401_pi300-10000_pass1_cl_src24_bgd.pi.gz [Sat Jan 7 16:07:02 2012] Updating aperture counts using extracted products [Sat Jan 7 16:07:02 2012] Error reading totcts from fullrun_mos2_xmm0023940401_pi300-10000_pass1_cl_src24_src_b10.pi.gz [Sat Jan 7 16:07:03 2012] Calculating source flux in energy range 0.30-8.00 [Sat Jan 7 16:07:03 2012] Using photon index=1.80, rate=0.0192, arf fullrun_mos2_xmm0023940401_pi300-10000_pass1_cl_src24.arf [Sat Jan 7 16:07:03 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jan 7 16:07:03 2012] Updating source flux to 1.9e-13 [Sat Jan 7 16:10:32 2012] Flag b found in src. 24 procflags, skipping spectral fitting [Sat Jan 7 16:10:32 2012] Flag c found in src. 24 procflags, skipping spectral fitting