[Fri Jan  6 10:46:50 2012] Detection parameters:
  Position = (299.7, 262.3) = 5 39 28.16 -69 45 39.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1561.7 +/- 57.2
  Background counts = 194.2
  Rate = 0.05 +/- 0.002

[Fri Jan  6 10:46:51 2012] Off-axis axis estimate = 2.62'
[Fri Jan  6 10:54:26 2012] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Fri Jan  6 10:54:26 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Fri Jan  6 10:54:26 2012] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.866
[Fri Jan  6 10:54:26 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.74"
[Fri Jan  6 13:24:08 2012] fullrun_mos1_xmm0023940401_pi300-10000_cl_pass0_src5.ximg exists
[Fri Jan  6 13:24:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0023940401_pi300-10000_cl_pass0_src5.csv
[Fri Jan  6 13:24:08 2012] fullrun_mos1_xmm0023940401_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Jan  6 13:24:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0023940401_pi300-10000_cl_pass0_src5.csv
[Fri Jan  6 13:24:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0023940401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0023940401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 13:24:09 2012] fullrun_mos1_xmm0023940401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Jan  6 13:24:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0023940401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Jan  6 13:24:09 2012] fullrun_mos1_xmm0023940401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Jan  6 13:24:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0023940401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Jan  6 13:24:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0023940401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0023940401_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 22:02:17 2012] Source 6 is offset by 6.978688 and -2.662763 pixels which is larger than
2 X fitted extent = 0.921949 x 3.407591, not incorporating fit results
[Fri Jan  6 22:02:17 2012] Spatial fit model total counts = 3538.510000, observed total counts = 3544.000000
[Fri Jan  6 22:02:17 2012] Offset between fit and detection position for source 6 = 3.164672 pixels
[Fri Jan  6 22:02:17 2012] Warning, changing simple spatial fit ID from 5 to 9
[Fri Jan  6 22:02:17 2012] 3561.322000 total counts/ 2703.020000 bgd. counts: snr = 16.508800
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 3.164672 pixels
  Position = (298.4, 265.2) = 5 39 29.21 -69 45 30.6
  Extent = 7.8 (7.2-8.8)", rotation angle = 0
  Source counts = 858.3 +/- 59.7
  Background counts = 2703.0
  Rate = 0.03 +/- 0.002
[Fri Jan  6 22:02:17 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 22:02:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 22:02:17 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 22:02:17 2012] Source does appear to be extended
[Fri Jan  6 22:02:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 22:02:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jan  6 22:02:42 2012] Initial guess for spatial extent in simple fitting = 7.83"
[Fri Jan  6 22:02:42 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.181
[Fri Jan  6 22:02:42 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.83"
[Sat Jan  7 02:28:55 2012] fullrun_mos1_xmm0023940401_pi300-10000_cl_pass1_src6.ximg exists
[Sat Jan  7 02:28:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0023940401_pi300-10000_cl_pass1_src6.csv
[Sat Jan  7 02:28:55 2012] fullrun_mos1_xmm0023940401_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Jan  7 02:28:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0023940401_pi300-10000_cl_pass1_src6.csv
[Sat Jan  7 02:28:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0023940401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0023940401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan  7 02:28:55 2012] fullrun_mos1_xmm0023940401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Jan  7 02:28:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0023940401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Jan  7 02:28:55 2012] fullrun_mos1_xmm0023940401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Jan  7 02:28:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0023940401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Jan  7 02:28:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0023940401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0023940401_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan  7 09:46:23 2012] Warning, spatial fit 6 centroid is now closest to src. 10
[Sat Jan  7 09:46:23 2012] Spatial fit model total counts = 3549.640000, observed total counts = 3544.000000
[Sat Jan  7 09:46:23 2012] Offset between fit and detection position for source 6 = 0.015704 pixels
[Sat Jan  7 09:46:23 2012] Warning, changing simple spatial fit ID from 6 to 9
[Sat Jan  7 09:46:23 2012] 3535.027000 total counts/ 2661.400000 bgd. counts: snr = 16.934445
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.015704 pixels
  Position = (298.4, 265.2) = 5 39 29.22 -69 45 30.6
  Extent = 7.9 (7.3-8.9)", rotation angle = 0
  Source counts = 873.6 +/- 59.5
  Background counts = 2661.4
  Rate = 0.03 +/- 0.002
[Sat Jan  7 09:46:23 2012] Vigneting correction estimate = 1.000000
[Sat Jan  7 09:46:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan  7 09:46:23 2012] Assessing source extent using major axis lower bound
[Sat Jan  7 09:46:23 2012] Source does appear to be extended
[Sat Jan  7 09:46:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan  7 09:46:38 2012] XMMSAS src. selection expression = ellipse(25912.454000, 23026.654000, 474.403214, 474.403214, 0.000000, X, Y)
[Sat Jan  7 09:46:38 2012] Writing source region out to fullrun_mos1_xmm0023940401_pi300-10000_pass1_cl_src6_src.reg
[Sat Jan  7 09:46:38 2012] Extracting stamp from image fullrun_mos1_xmm0023940401_pi300-10000_cl_sm2.00.img.gz, (271, 238) - (326, 292)
[Sat Jan  7 09:46:38 2012] XMMSAS bgd. selection expression = annulus(25912.454000, 23026.654000, 790.672023, 1581.344046, X, Y) && !ellipse(24890.218400, 24123.281120, 3615.960104, 3615.960104, 0.000000, X, Y) && !ellipse(24871.924600, 22869.344000, 686.523220, 686.523220, 0.000000, X, Y) && !ellipse(25634.020400, 21819.496000, 1071.032031, 1071.032031, 0.000000, X, Y) && !ellipse(23530.358000, 21568.948000, 1309.104038, 1309.104038, 0.000000, X, Y) && !ellipse(24750.803802, 22144.506241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26304.436676, 22424.246765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27813.773041, 24483.957428, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan  7 09:46:38 2012] Writing fullrun_mos1_xmm0023940401_pi300-10000_pass1_cl_src6.gif
[Sat Jan  7 10:13:19 2012] Mean detx,y = (1352.02, -941.21) 
[Sat Jan  7 10:13:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan  7 10:13:29 2012] Binned source spectrum to 10 counts/bin
[Sat Jan  7 10:13:29 2012] Setting source spectrum file to fullrun_mos1_xmm0023940401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jan  7 10:13:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0023940401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Jan  7 16:07:01 2012] Updating aperture counts using extracted products
[Sat Jan  7 16:07:01 2012] Error reading totcts from fullrun_mos1_xmm0023940401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jan  7 16:07:01 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan  7 16:07:01 2012] Using photon index=1.80, rate=0.0339, arf fullrun_mos1_xmm0023940401_pi300-10000_pass1_cl_src6.arf
[Sat Jan  7 16:07:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan  7 16:07:01 2012] Updating source flux to 3.7e-13
[Sat Jan  7 16:07:04 2012] Flag b found in src. 6 procflags, skipping spectral fitting