[Fri Jan  6 10:46:50 2012] Detection parameters:
  Position = (286.0, 260.0) = 5 39 39.65 -69 45 44.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2981.3 +/- 82.9
  Background counts = 196.5
  Rate = 0.09 +/- 0.002

[Fri Jan  6 10:46:51 2012] Off-axis axis estimate = 2.93'
[Fri Jan  6 10:54:26 2012] Using EEF radius (= 7.89 ")to estimate initial spatial extent for simple fitting
[Fri Jan  6 10:54:26 2012] Initial guess for spatial extent in simple fitting = 7.89"
[Fri Jan  6 10:54:26 2012] source mask rpix=1.8, npix_max = 21, mask sum = 8, frac = 0.373
[Fri Jan  6 10:54:26 2012] Skipping simple spatial due to low active detector fraction
[Fri Jan  6 22:02:17 2012] Spatial fit model total counts = 8034.610000, observed total counts = 8056.000000
[Fri Jan  6 22:02:17 2012] Offset between fit and detection position for source 2 = 5.428196 pixels
[Fri Jan  6 22:02:17 2012] Warning, changing simple spatial fit ID from -1 to 2
[Fri Jan  6 22:02:17 2012] 8061.480000 total counts/ 5858.710000 bgd. counts: snr = 28.778500
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 5.428196 pixels
  Position = (287.1, 265.3) = 5 39 38.72 -69 45 30.2
  Extent = 11.9 (11.2-12.6)", rotation angle = 0
  Source counts = 2202.8 +/- 89.8
  Background counts = 5858.7
  Rate = 0.09 +/- 0.003
[Fri Jan  6 22:02:17 2012] Spatial fit model total counts = 7246.610000, observed total counts = 7215.000000
[Fri Jan  6 22:02:17 2012] Offset between fit and detection position for source 2 = 1.994345 pixels
[Fri Jan  6 22:02:17 2012] Warning, changing simple spatial fit ID from 2 to 4
[Fri Jan  6 22:02:17 2012] 7556.471000 total counts/ 6846.660000 bgd. counts: snr = 8.578342
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.994345 pixels
  Position = (286.4, 263.4) = 5 39 39.25 -69 45 38.5
  Extent = 7.4 (6.8-8.2)", rotation angle = 0
  Source counts = 709.8 +/- 86.9
  Background counts = 6846.7
  Rate = 0.03 +/- 0.003
[Fri Jan  6 22:02:17 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 22:02:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 22:02:17 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 22:02:17 2012] Source does appear to be extended
[Fri Jan  6 22:02:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 22:02:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jan  6 22:02:42 2012] Initial guess for spatial extent in simple fitting = 7.43"
[Fri Jan  6 22:02:42 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.283
[Fri Jan  6 22:02:42 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.43"
[Sat Jan  7 02:28:55 2012] fullrun_mos1_xmm0023940401_pi300-10000_cl_pass1_src2.ximg exists
[Sat Jan  7 02:28:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0023940401_pi300-10000_cl_pass1_src2.csv
[Sat Jan  7 02:28:55 2012] fullrun_mos1_xmm0023940401_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Jan  7 02:28:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0023940401_pi300-10000_cl_pass1_src2.csv
[Sat Jan  7 02:28:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0023940401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0023940401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan  7 02:28:55 2012] fullrun_mos1_xmm0023940401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Jan  7 02:28:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0023940401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jan  7 02:28:55 2012] fullrun_mos1_xmm0023940401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Jan  7 02:28:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0023940401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jan  7 02:28:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0023940401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0023940401_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan  7 09:46:23 2012] Warning, spatial fit 2 centroid is now closest to src. 3
[Sat Jan  7 09:46:23 2012] Spatial fit model total counts = 7215.550000, observed total counts = 7215.000000
[Sat Jan  7 09:46:23 2012] Offset between fit and detection position for source 2 = 0.000802 pixels
[Sat Jan  7 09:46:23 2012] Warning, changing simple spatial fit ID from 2 to 5
[Sat Jan  7 09:46:23 2012] 6773.437000 total counts/ 5835.870000 bgd. counts: snr = 12.272965
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000802 pixels
  Position = (286.4, 263.4) = 5 39 39.25 -69 45 38.5
  Extent = 8.6 (7.7-9.4)", rotation angle = 0
  Source counts = 937.6 +/- 82.3
  Background counts = 5835.9
  Rate = 0.04 +/- 0.003
[Sat Jan  7 09:46:23 2012] Vigneting correction estimate = 1.000000
[Sat Jan  7 09:46:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan  7 09:46:23 2012] Assessing source extent using major axis lower bound
[Sat Jan  7 09:46:23 2012] Source does appear to be extended
[Sat Jan  7 09:46:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan  7 09:46:37 2012] XMMSAS src. selection expression = ellipse(24871.924600, 22869.344000, 514.892415, 514.892415, 0.000000, X, Y)
[Sat Jan  7 09:46:37 2012] Writing source region out to fullrun_mos1_xmm0023940401_pi300-10000_pass1_cl_src2_src.reg
[Sat Jan  7 09:46:37 2012] Extracting stamp from image fullrun_mos1_xmm0023940401_pi300-10000_cl_sm2.00.img.gz, (257, 234) - (316, 293)
[Sat Jan  7 09:46:37 2012] XMMSAS bgd. selection expression = annulus(24871.924600, 22869.344000, 858.154025, 1716.308049, X, Y) && !ellipse(24890.218400, 24123.281120, 3615.960104, 3615.960104, 0.000000, X, Y) && !ellipse(25634.020400, 21819.496000, 1071.032031, 1071.032031, 0.000000, X, Y) && !ellipse(23530.358000, 21568.948000, 1309.104038, 1309.104038, 0.000000, X, Y) && !ellipse(24750.803802, 22144.506241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25912.454000, 23026.654000, 632.537618, 632.537618, 0.000000, X, Y) && !ellipse(22541.138000, 24974.834000, 1283.336037, 1283.336037, 0.000000, X, Y) && !ellipse(26304.436676, 22424.246765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22322.606934, 22499.917755, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan  7 09:46:37 2012] Writing fullrun_mos1_xmm0023940401_pi300-10000_pass1_cl_src2.gif
[Sat Jan  7 09:58:40 2012] Mean detx,y = (1320.25, 27.79) 
[Sat Jan  7 09:58:42 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan  7 09:58:53 2012] Binned source spectrum to 10 counts/bin
[Sat Jan  7 09:58:53 2012] Setting source spectrum file to fullrun_mos1_xmm0023940401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jan  7 09:58:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0023940401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jan  7 16:07:01 2012] Updating aperture counts using extracted products
[Sat Jan  7 16:07:01 2012] Error reading totcts from fullrun_mos1_xmm0023940401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jan  7 16:07:01 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan  7 16:07:01 2012] Using photon index=1.80, rate=0.0364, arf fullrun_mos1_xmm0023940401_pi300-10000_pass1_cl_src2.arf
[Sat Jan  7 16:07:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan  7 16:07:01 2012] Updating source flux to 3.8e-13