[Tue Jul  2 00:08:15 2013] Detection parameters:
  Position = (271.2, 190.1) = 18 37 3.24 -59 30 54.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 339.9 +/- 24.6
  Background counts = 61.6
  Rate = 0.009 +/- 0.0006

[Tue Jul  2 00:08:15 2013] Off-axis axis estimate = 8.10'
[Tue Jul  2 01:06:15 2013] Using EEF radius (= 10.48 ")to estimate initial spatial extent for simple fitting
[Tue Jul  2 01:06:15 2013] Initial guess for spatial extent in simple fitting = 10.48"
[Tue Jul  2 01:06:15 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.063
[Tue Jul  2 01:06:15 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 10.48"
[Tue Jul  2 01:37:31 2013] fullrun_mos2_xmm0022940101_pi300-10000_cl_pass0_src4.ximg exists
[Tue Jul  2 01:37:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022940101_pi300-10000_cl_pass0_src4.csv
[Tue Jul  2 01:37:31 2013] fullrun_mos2_xmm0022940101_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Jul  2 01:37:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022940101_pi300-10000_cl_pass0_src4.csv
[Tue Jul  2 01:37:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0022940101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0022940101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  2 01:37:31 2013] fullrun_mos2_xmm0022940101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Jul  2 01:37:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022940101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Jul  2 01:37:31 2013] fullrun_mos2_xmm0022940101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Jul  2 01:37:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022940101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Jul  2 01:37:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0022940101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0022940101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  2 01:37:41 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 11.383062 pixels away
[Tue Jul  2 01:37:41 2013] Vigneting correction estimate = 1.000000
[Tue Jul  2 01:37:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  2 01:37:41 2013] Assessing source extent using major
[Tue Jul  2 01:37:41 2013] Source does appear to be extended
[Tue Jul  2 01:37:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  2 01:59:16 2013] Using EEF radius (= 10.48 ")to estimate initial spatial extent for simple fitting
[Tue Jul  2 01:59:16 2013] Initial guess for spatial extent in simple fitting = 10.48"
[Tue Jul  2 01:59:16 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.063
[Tue Jul  2 01:59:16 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 10.48"
[Tue Jul  2 02:32:10 2013] fullrun_mos2_xmm0022940101_pi300-10000_cl_pass1_src4.ximg exists
[Tue Jul  2 02:32:10 2013] fullrun_mos2_xmm0022940101_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Jul  2 02:32:10 2013] Fit fullrun_mos2_xmm0022940101_pi300-10000_cl_pass1_src4 appears to have run properly
[Tue Jul  2 02:32:10 2013] fullrun_mos2_xmm0022940101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Jul  2 02:32:10 2013] fullrun_mos2_xmm0022940101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Jul  2 02:32:10 2013] Fit fullrun_mos2_xmm0022940101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Tue Jul  2 02:32:17 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 12.857538 pixels away
[Tue Jul  2 02:32:17 2013] Vigneting correction estimate = 1.000000
[Tue Jul  2 02:32:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  2 02:32:17 2013] Assessing source extent using major
[Tue Jul  2 02:32:17 2013] Source does appear to be extended
[Tue Jul  2 02:32:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  2 03:16:26 2013] XMMSAS src. selection expression = ellipse(23543.107971, 16486.900330, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul  2 03:16:26 2013] Writing source region out to fullrun_mos2_xmm0022940101_pi300-10000_pass1_cl_src29_src.reg
[Tue Jul  2 03:16:26 2013] Extracting stamp from image fullrun_mos2_xmm0022940101_pi300-10000_cl_sm2.00.img.gz, (234, 153) - (309, 228)
[Tue Jul  2 03:16:26 2013] XMMSAS bgd. selection expression = annulus(23543.107971, 16486.900330, 1087.500000, 2175.000000, X, Y) && !ellipse(25870.110560, 15806.391400, 462.657613, 304.485609, 8.115657, X, Y)
[Tue Jul  2 03:16:26 2013] Writing fullrun_mos2_xmm0022940101_pi300-10000_pass1_cl_src29.gif
[Tue Jul  2 03:18:38 2013] Mean detx,y = (1546.14, 8101.65) 
[Tue Jul  2 03:18:39 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  2 03:18:58 2013] Binned source spectrum to 10 counts/bin
[Tue Jul  2 03:18:58 2013] Setting source spectrum file to fullrun_mos2_xmm0022940101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue Jul  2 03:18:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0022940101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Tue Jul  2 03:27:22 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul  2 03:27:22 2013] rmf not generated due to insufficient counts
[Tue Jul  2 04:01:06 2013] Updating aperture counts using extracted products
[Tue Jul  2 04:01:06 2013] Total counts from fullrun_mos2_xmm0022940101_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 732.00
[Tue Jul  2 04:01:06 2013] Total counts from fullrun_mos2_xmm0022940101_pi300-10000_pass1_cl_src29_bgd.pi.gz = 2510.00
[Tue Jul  2 04:01:06 2013] Got source and background scale factors 1262392.000000, 8773886.000000
[Tue Jul  2 04:01:06 2013] User source parameters:
  Position = (271.2, 190.1) = 18 37 3.24 -59 30 54.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 370.9 +/- 28.1
  Background aperture counts = 361.1
  Rate = 0.006 +/- 0.0004

[Tue Jul  2 04:01:06 2013] Updating counts from extracted products
[Tue Jul  2 04:01:06 2013] Set source signif. to 370.86/19.00 = 19.52
[Tue Jul  2 04:01:09 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jul  2 04:01:09 2013] Using photon index=1.80, rate=0.00571, arf fullrun_mos2_xmm0022940101_pi300-10000_pass1_cl_src29.arf
[Tue Jul  2 04:01:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  2 04:01:09 2013] Updating source flux to 1.1e-13
[Tue Jul  2 04:01:15 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jul  2 04:01:19 2013] xmm0022940101/analysis//spectral/fullrun_mos2_xmm0022940101_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete