[Wed May 30 10:08:53 2012] Detection parameters:
  Position = (238.0, 373.0) = 10 53 16.66 57 35 52.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1886.0 +/- 53.7
  Background counts = 62.2
  Rate = 0.1 +/- 0.003

[Wed May 30 10:08:54 2012] Off-axis axis estimate = 6.96'
[Wed May 30 10:12:09 2012] Using EEF radius (= 9.91 ")to estimate initial spatial extent for simple fitting
[Wed May 30 10:12:09 2012] Initial guess for spatial extent in simple fitting = 9.91"
[Wed May 30 10:12:09 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.166
[Wed May 30 10:12:09 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.91"
[Wed May 30 11:31:12 2012] fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 30 11:31:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_src3.csv
[Wed May 30 11:31:12 2012] fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 30 11:31:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_src3.csv
[Wed May 30 11:31:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 11:31:12 2012] fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 30 11:31:12 2012] fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 30 11:31:12 2012] Fit fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed May 30 13:31:34 2012] Spatial fit model total counts = 1903.460000, observed total counts = 1899.000000
[Wed May 30 13:31:34 2012] Offset between fit and detection position for source 3 = 0.143964 pixels
[Wed May 30 13:31:34 2012] 1894.945000 total counts/ 680.595000 bgd. counts: snr = 46.547836
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.143964 pixels
  Position = (237.9, 373.0) = 10 53 16.74 57 35 50.9
  Extent = 5.8 (5.5-6.1)", rotation angle = 0
  Source counts = 1214.3 +/- 43.5
  Background counts = 680.6
  Rate = 0.04 +/- 0.001
[Wed May 30 13:31:34 2012] Vigneting correction estimate = 1.000000
[Wed May 30 13:31:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 13:31:34 2012] Assessing source extent using major axis lower bound
[Wed May 30 13:31:34 2012] Source does appear to be extended
[Wed May 30 13:31:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 13:32:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 30 13:32:01 2012] Initial guess for spatial extent in simple fitting = 5.77"
[Wed May 30 13:32:01 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.199
[Wed May 30 13:32:01 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.77"
[Wed May 30 14:47:23 2012] fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_src3.ximg exists
[Wed May 30 14:47:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_src3.csv
[Wed May 30 14:47:23 2012] fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed May 30 14:47:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_src3.csv
[Wed May 30 14:47:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 14:47:24 2012] fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed May 30 14:47:24 2012] fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed May 30 14:47:24 2012] Fit fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed May 30 16:33:46 2012] Warning, spatial fit 3 centroid is now closest to src. 23
[Wed May 30 16:33:46 2012] Vigneting correction estimate = 1.000000
[Wed May 30 16:33:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 16:33:46 2012] Assessing source extent using major axis lower bound
[Wed May 30 16:33:46 2012] Source does appear to be extended
[Wed May 30 16:33:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 16:34:14 2012] Counts = 1214.350000, rescaling region sizes by 2.000000
[Wed May 30 16:34:14 2012] XMMSAS src. selection expression = ellipse(20646.505840, 32403.653200, 692.248820, 692.248820, 0.000000, X, Y)
[Wed May 30 16:34:14 2012] Writing source region out to fullrun_pn_xmm0022740301_pi300-10000_pass1_cl_src3_src.reg
[Wed May 30 16:34:14 2012] Extracting stamp from image fullrun_pn_xmm0022740301_pi300-10000_cl_sm2.00.img.gz, (198, 333) - (278, 413)
[Wed May 30 16:34:14 2012] XMMSAS bgd. selection expression = annulus(20646.505840, 32403.653200, 2307.496066, 4614.992133, X, Y) && !ellipse(17511.931473, 35011.053009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22990.938873, 34936.579437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16298.029510, 32018.274780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17133.520767, 31889.548340, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 30 16:34:14 2012] Writing fullrun_pn_xmm0022740301_pi300-10000_pass1_cl_src3.gif
[Wed May 30 16:38:44 2012] Mean detx,y = (-920.91, 9820.38) 
[Wed May 30 16:38:47 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 16:39:26 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 16:39:26 2012] Setting source spectrum file to fullrun_pn_xmm0022740301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed May 30 16:39:26 2012] Setting bgd. spectrum file to fullrun_pn_xmm0022740301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed May 30 18:50:13 2012] Updating aperture counts using extracted products
[Wed May 30 18:50:13 2012] Error reading totcts from fullrun_pn_xmm0022740301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed May 30 18:50:14 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 18:50:14 2012] Using photon index=1.80, rate=0.0377, arf fullrun_pn_xmm0022740301_pi300-10000_pass1_cl_src3.arf
[Wed May 30 18:50:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 18:50:14 2012] Updating source flux to 1.8e-13