[Wed May 30 10:08:53 2012] Detection parameters:
  Position = (203.6, 232.9) = 10 53 35.05 57 25 43.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1114.9 +/- 40.2
  Background counts = 61.6
  Rate = 0.05 +/- 0.002

[Wed May 30 10:08:54 2012] Off-axis axis estimate = 8.36'
[Wed May 30 10:12:09 2012] Using EEF radius (= 10.61 ")to estimate initial spatial extent for simple fitting
[Wed May 30 10:12:09 2012] Initial guess for spatial extent in simple fitting = 10.61"
[Wed May 30 10:12:09 2012] source mask rpix=2.4, npix_max = 34, mask sum = 33, frac = 0.956
[Wed May 30 10:12:09 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 10.61"
[Wed May 30 11:31:12 2012] fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_src13.ximg exists
[Wed May 30 11:31:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_src13.csv
[Wed May 30 11:31:12 2012] fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed May 30 11:31:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_src13.csv
[Wed May 30 11:31:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 11:31:12 2012] fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed May 30 11:31:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_tfrozen_src13.csv
[Wed May 30 11:31:12 2012] fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed May 30 11:31:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_tfrozen_src13.csv
[Wed May 30 11:31:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 13:31:34 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 14.203357 pixels away
[Wed May 30 13:31:34 2012] Vigneting correction estimate = 1.000000
[Wed May 30 13:31:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 13:31:34 2012] Assessing source extent using major
[Wed May 30 13:31:34 2012] Source does appear to be extended
[Wed May 30 13:31:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 13:32:01 2012] Using EEF radius (= 10.61 ")to estimate initial spatial extent for simple fitting
[Wed May 30 13:32:01 2012] Initial guess for spatial extent in simple fitting = 10.61"
[Wed May 30 13:32:01 2012] source mask rpix=2.4, npix_max = 34, mask sum = 33, frac = 0.956
[Wed May 30 13:32:01 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 10.61"
[Wed May 30 14:47:23 2012] fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_src13.ximg exists
[Wed May 30 14:47:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_src13.csv
[Wed May 30 14:47:23 2012] fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed May 30 14:47:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_src13.csv
[Wed May 30 14:47:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 14:47:24 2012] fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed May 30 14:47:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_tfrozen_src13.csv
[Wed May 30 14:47:24 2012] fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed May 30 14:47:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_tfrozen_src13.csv
[Wed May 30 14:47:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 16:33:46 2012] Spatial fit model total counts = 1354.560000, observed total counts = 1214.000000
[Wed May 30 16:33:46 2012] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 30 16:33:46 2012] Source 13 is offset by -1.540776 and 0.113603 pixels which is larger than
2 X fitted extent = 1.226703 x 1.226703, not incorporating fit results
[Wed May 30 16:33:46 2012] Vigneting correction estimate = 1.000000
[Wed May 30 16:33:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 16:33:46 2012] Assessing source extent using major
[Wed May 30 16:33:46 2012] Source does appear to be extended
[Wed May 30 16:33:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 16:34:14 2012] Counts = 1114.948608, rescaling region sizes by 2.000000
[Wed May 30 16:34:14 2012] XMMSAS src. selection expression = ellipse(17664.562469, 20215.481430, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed May 30 16:34:14 2012] Writing source region out to fullrun_pn_xmm0022740301_pi300-10000_pass1_cl_src13_src.reg
[Wed May 30 16:34:14 2012] Extracting stamp from image fullrun_pn_xmm0022740301_pi300-10000_cl_sm2.00.img.gz, (129, 158) - (279, 308)
[Wed May 30 16:34:14 2012] XMMSAS bgd. selection expression = annulus(17664.562469, 20215.481430, 4350.000000, 8700.000000, X, Y) && !ellipse(26608.519836, 18839.292130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16934.264801, 26675.686768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15459.899155, 26070.483459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11994.492523, 26225.261047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16080.400742, 23784.426239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18195.557709, 19271.954376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26159.718994, 27819.797302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23491.380035, 25973.224426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22727.452800, 24665.263800, 404.340012, 301.280009, 317.116678, X, Y) && !ellipse(24529.302673, 24168.433746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19366.672546, 23412.655762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21871.599762, 23313.062958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15004.193909, 21878.156357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21343.809143, 19504.577423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23775.430100, 19528.722200, 418.920012, 418.920012, 0.000000, X, Y) && !ellipse(23563.084412, 18100.043030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24096.320000, 17946.441600, 1572.696045, 1572.696045, 0.000000, X, Y) && !ellipse(23568.780600, 16654.008200, 308.085609, 308.085609, 0.000000, X, Y) && !ellipse(25793.290436, 15036.910507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25257.194885, 14904.550659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20220.671600, 12051.311000, 591.424017, 591.424017, 0.000000, X, Y) && !ellipse(21733.781174, 14537.154343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18558.277191, 14662.315079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20412.586823, 14205.408432, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 30 16:34:14 2012] Writing fullrun_pn_xmm0022740301_pi300-10000_pass1_cl_src13.gif
[Wed May 30 16:47:54 2012] Mean detx,y = (9021.17, 1874.97) 
[Wed May 30 16:47:59 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 16:50:35 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 16:50:35 2012] Setting source spectrum file to fullrun_pn_xmm0022740301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed May 30 16:50:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0022740301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Wed May 30 17:28:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 30 17:28:55 2012] rmf not generated due to insufficient counts
[Wed May 30 18:50:13 2012] Updating aperture counts using extracted products
[Wed May 30 18:50:13 2012] Error reading totcts from fullrun_pn_xmm0022740301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed May 30 18:50:14 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 18:50:14 2012] Using photon index=1.80, rate=0.054, arf fullrun_pn_xmm0022740301_pi300-10000_pass1_cl_src13.arf
[Wed May 30 18:50:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 18:50:14 2012] Updating source flux to 2e-13
[Wed May 30 18:51:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting