[Wed May 30 10:08:53 2012] Detection parameters:
  Position = (433.8, 357.0) = 10 51 30.73 57 34 40.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4609.1 +/- 80.8
  Background counts = 60.8
  Rate = 0.1 +/- 0.002

[Wed May 30 10:08:54 2012] Off-axis axis estimate = 10.69'
[Wed May 30 10:12:09 2012] Using EEF radius (= 11.77 ")to estimate initial spatial extent for simple fitting
[Wed May 30 10:12:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 30 10:12:09 2012] Initial guess for spatial extent in simple fitting = 11.77"
[Wed May 30 10:12:09 2012] source mask rpix=2.7, npix_max = 41, mask sum = 35, frac = 0.851
[Wed May 30 10:12:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.77"
[Wed May 30 11:31:12 2012] fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_src1.ximg exists
[Wed May 30 11:31:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_src1.csv
[Wed May 30 11:31:12 2012] fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May 30 11:31:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_src1.csv
[Wed May 30 11:31:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 11:31:12 2012] fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May 30 11:31:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed May 30 11:31:12 2012] fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 30 11:31:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed May 30 11:31:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0022740301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 13:31:34 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.993953 pixels away
[Wed May 30 13:31:34 2012] Vigneting correction estimate = 1.000000
[Wed May 30 13:31:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 13:31:34 2012] Assessing source extent using major
[Wed May 30 13:31:34 2012] Source does appear to be extended
[Wed May 30 13:31:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 13:31:34 2012] Source is confused with source 25
[Wed May 30 13:32:01 2012] Using EEF radius (= 11.77 ")to estimate initial spatial extent for simple fitting
[Wed May 30 13:32:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 30 13:32:01 2012] Initial guess for spatial extent in simple fitting = 11.77"
[Wed May 30 13:32:01 2012] source mask rpix=2.7, npix_max = 41, mask sum = 35, frac = 0.851
[Wed May 30 13:32:01 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.77"
[Wed May 30 14:47:23 2012] fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_src1.ximg exists
[Wed May 30 14:47:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_src1.csv
[Wed May 30 14:47:23 2012] fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May 30 14:47:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_src1.csv
[Wed May 30 14:47:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 14:47:24 2012] fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May 30 14:47:24 2012] fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 30 14:47:24 2012] Fit fullrun_pn_xmm0022740301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed May 30 16:33:46 2012] Spatial fit model total counts = 5155.090000, observed total counts = 4804.000000
[Wed May 30 16:33:46 2012] Offset between fit and detection position for source 1 = 0.368865 pixels
[Wed May 30 16:33:46 2012] 4969.720000 total counts/ 1406.800000 bgd. counts: snr = 94.992625
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.368865 pixels
  Position = (433.5, 357.0) = 10 51 30.93 57 34 40.2
  Extent = 7.2 (7.0-7.4)", rotation angle = 0
  Source counts = 3562.9 +/- 70.5
  Background counts = 1406.8
  Rate = 0.1 +/- 0.002
[Wed May 30 16:33:46 2012] Vigneting correction estimate = 1.000000
[Wed May 30 16:33:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 16:33:46 2012] Assessing source extent using major axis lower bound
[Wed May 30 16:33:46 2012] Source does appear to be extended
[Wed May 30 16:33:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 16:34:14 2012] Counts = 3562.920000, rescaling region sizes by 2.000000
[Wed May 30 16:34:14 2012] XMMSAS src. selection expression = ellipse(37661.763400, 31009.936400, 860.468425, 860.468425, 0.000000, X, Y)
[Wed May 30 16:34:14 2012] Writing source region out to fullrun_pn_xmm0022740301_pi300-10000_pass1_cl_src1_src.reg
[Wed May 30 16:34:14 2012] Extracting stamp from image fullrun_pn_xmm0022740301_pi300-10000_cl_sm2.00.img.gz, (384, 308) - (483, 406)
[Wed May 30 16:34:14 2012] XMMSAS bgd. selection expression = annulus(37661.763400, 31009.936400, 2868.228083, 5736.456165, X, Y) && !ellipse(33899.943220, 30923.132000, 525.252015, 380.316011, 244.090879, X, Y) && !ellipse(34240.154440, 36312.424000, 565.868816, 565.868816, 0.000000, X, Y) && !ellipse(36632.800659, 34921.429840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38162.357727, 31455.318298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34817.482788, 28760.742340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42047.544403, 26495.041229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38588.726227, 26447.362213, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 30 16:34:14 2012] Writing fullrun_pn_xmm0022740301_pi300-10000_pass1_cl_src1.gif
[Wed May 30 16:34:33 2012] Mean detx,y = (-13459.00, -1804.01) 
[Wed May 30 16:34:37 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 16:35:39 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 16:35:40 2012] Setting source spectrum file to fullrun_pn_xmm0022740301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 30 16:35:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0022740301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May 30 18:50:13 2012] Updating aperture counts using extracted products
[Wed May 30 18:50:13 2012] Error reading totcts from fullrun_pn_xmm0022740301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 30 18:50:14 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 18:50:14 2012] Using photon index=1.80, rate=0.111, arf fullrun_pn_xmm0022740301_pi300-10000_pass1_cl_src1.arf
[Wed May 30 18:50:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 18:50:14 2012] Updating source flux to 7.7e-13
[Wed May 30 18:51:36 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Wed May 30 18:52:17 2012] Reading fit data from xmm0022740301/analysis//spectral/fullrun_pn_xmm0022740301_pi300-10000_pass1_cl_src1_pl.csv
[Wed May 30 18:52:17 2012] Spectral fit parameter nH value = 1.76461e+21
[Wed May 30 18:52:17 2012] Spectral fit parameter PhoIndex value = 3.15449
[Wed May 30 18:52:17 2012] Failed to get F(0.3-8.0) from xmm0022740301/analysis//spectral/fullrun_pn_xmm0022740301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed May 30 18:52:17 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 18:52:17 2012] Using Nh = 1.8e+21, photon index=3.15, rate=0.111, arf fullrun_pn_xmm0022740301_pi300-10000_pass1_cl_src1.arf
[Wed May 30 18:52:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 18:52:17 2012] Updating source flux to 5.5e-13