[Wed May 30 10:09:52 2012] Detection parameters:
  Position = (119.1, 229.5) = 10 54 20.54 57 25 29.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.5 +/- 13.3
  Background counts = 12.6
  Rate = 0.003 +/- 0.0004

[Wed May 30 10:09:52 2012] Off-axis axis estimate = 13.93'
[Wed May 30 12:33:01 2012] Using EEF radius (= 13.39 ")to estimate initial spatial extent for simple fitting
[Wed May 30 12:33:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 30 12:33:01 2012] Initial guess for spatial extent in simple fitting = 13.39"
[Wed May 30 12:33:01 2012] source mask rpix=3.1, npix_max = 51, mask sum = 40, frac = 0.781
[Wed May 30 12:33:01 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 13.39"
[Wed May 30 13:31:24 2012] fullrun_mos2_xmm0022740301_pi300-10000_cl_pass0_src19.ximg exists
[Wed May 30 13:31:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022740301_pi300-10000_cl_pass0_src19.csv
[Wed May 30 13:31:24 2012] fullrun_mos2_xmm0022740301_pi300-10000_cl_pass0_src19_1.ximg exists
[Wed May 30 13:31:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022740301_pi300-10000_cl_pass0_src19.csv
[Wed May 30 13:31:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0022740301_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0022740301_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 13:31:25 2012] fullrun_mos2_xmm0022740301_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Wed May 30 13:31:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022740301_pi300-10000_cl_pass0_tfrozen_src19.csv
[Wed May 30 13:31:25 2012] fullrun_mos2_xmm0022740301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Wed May 30 13:31:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022740301_pi300-10000_cl_pass0_tfrozen_src19.csv
[Wed May 30 13:31:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0022740301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0022740301_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 13:31:47 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 12.921695 pixels away
[Wed May 30 13:31:47 2012] Vigneting correction estimate = 1.000000
[Wed May 30 13:31:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 13:31:47 2012] Assessing source extent using major
[Wed May 30 13:31:47 2012] Source does appear to be extended
[Wed May 30 13:31:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 15:40:41 2012] Using EEF radius (= 13.39 ")to estimate initial spatial extent for simple fitting
[Wed May 30 15:40:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 30 15:40:41 2012] Initial guess for spatial extent in simple fitting = 13.39"
[Wed May 30 15:40:41 2012] source mask rpix=3.1, npix_max = 51, mask sum = 40, frac = 0.781
[Wed May 30 15:40:41 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 13.39"
[Wed May 30 16:33:34 2012] fullrun_mos2_xmm0022740301_pi300-10000_cl_pass1_src19.ximg exists
[Wed May 30 16:33:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022740301_pi300-10000_cl_pass1_src19.csv
[Wed May 30 16:33:34 2012] fullrun_mos2_xmm0022740301_pi300-10000_cl_pass1_src19_1.ximg exists
[Wed May 30 16:33:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022740301_pi300-10000_cl_pass1_src19.csv
[Wed May 30 16:33:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0022740301_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0022740301_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 16:33:35 2012] fullrun_mos2_xmm0022740301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Wed May 30 16:33:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022740301_pi300-10000_cl_pass1_tfrozen_src19.csv
[Wed May 30 16:33:35 2012] fullrun_mos2_xmm0022740301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Wed May 30 16:33:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022740301_pi300-10000_cl_pass1_tfrozen_src19.csv
[Wed May 30 16:33:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0022740301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0022740301_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 16:34:00 2012] Source 15 is offset by 4.661217 and -4.123772 pixels which is larger than
2 X fitted extent = 0.616726 x 1.472910, not incorporating fit results
[Wed May 30 16:34:00 2012] Vigneting correction estimate = 1.000000
[Wed May 30 16:34:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 16:34:00 2012] Assessing source extent using major
[Wed May 30 16:34:00 2012] Source does appear to be extended
[Wed May 30 16:34:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 18:18:09 2012] XMMSAS src. selection expression = ellipse(10316.079910, 19922.299820, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 30 18:18:09 2012] Writing source region out to fullrun_mos2_xmm0022740301_pi300-10000_pass1_cl_src15_src.reg
[Wed May 30 18:18:09 2012] Extracting stamp from image fullrun_mos2_xmm0022740301_pi300-10000_cl_sm2.00.img.gz, (82, 192) - (157, 267)
[Wed May 30 18:18:09 2012] XMMSAS bgd. selection expression = annulus(10316.079910, 19922.299820, 1087.500000, 2175.000000, X, Y)
[Wed May 30 18:18:09 2012] Writing fullrun_mos2_xmm0022740301_pi300-10000_pass1_cl_src15.gif
[Wed May 30 18:25:11 2012] Mean detx,y = (-14757.65, -6308.44) 
[Wed May 30 18:25:12 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 18:25:29 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 18:25:29 2012] Setting source spectrum file to fullrun_mos2_xmm0022740301_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed May 30 18:25:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0022740301_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed May 30 18:43:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 30 18:43:23 2012] rmf not generated due to insufficient counts
[Wed May 30 18:50:15 2012] Updating aperture counts using extracted products
[Wed May 30 18:50:15 2012] Error reading totcts from fullrun_mos2_xmm0022740301_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed May 30 18:50:16 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 18:50:16 2012] Using photon index=1.80, rate=0.00309, arf fullrun_mos2_xmm0022740301_pi300-10000_pass1_cl_src15.arf
[Wed May 30 18:50:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 18:50:16 2012] Updating source flux to 1.4e-13
[Wed May 30 18:51:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting