[Wed May 30 10:09:24 2012] Detection parameters:
  Position = (297.7, 172.5) = 10 52 44.37 57 21 20.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.9 +/- 9.3
  Background counts = 15.3
  Rate = 0.001 +/- 0.0004

[Wed May 30 10:09:24 2012] Off-axis axis estimate = 9.13'
[Wed May 30 11:31:13 2012] Using EEF radius (= 10.99 ")to estimate initial spatial extent for simple fitting
[Wed May 30 11:31:13 2012] Initial guess for spatial extent in simple fitting = 10.99"
[Wed May 30 11:31:13 2012] source mask rpix=2.5, npix_max = 36, mask sum = 34, frac = 0.928
[Wed May 30 11:31:13 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 10.99"
[Wed May 30 12:33:00 2012] fullrun_mos1_xmm0022740301_pi300-10000_cl_pass0_src34.ximg exists
[Wed May 30 12:33:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740301_pi300-10000_cl_pass0_src34.csv
[Wed May 30 12:33:00 2012] fullrun_mos1_xmm0022740301_pi300-10000_cl_pass0_src34_1.ximg exists
[Wed May 30 12:33:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740301_pi300-10000_cl_pass0_src34.csv
[Wed May 30 12:33:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0022740301_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0022740301_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 12:33:00 2012] fullrun_mos1_xmm0022740301_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Wed May 30 12:33:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740301_pi300-10000_cl_pass0_tfrozen_src34.csv
[Wed May 30 12:33:00 2012] fullrun_mos1_xmm0022740301_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Wed May 30 12:33:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740301_pi300-10000_cl_pass0_tfrozen_src34.csv
[Wed May 30 12:33:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0022740301_pi300-10000_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0022740301_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 13:31:41 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 13.942512 pixels away
[Wed May 30 13:31:41 2012] Warning: source 34 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 11.541473 pixels away
[Wed May 30 13:31:41 2012] Vigneting correction estimate = 1.000000
[Wed May 30 13:31:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 13:31:41 2012] Assessing source extent using major
[Wed May 30 13:31:41 2012] Source does appear to be extended
[Wed May 30 13:31:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 13:31:41 2012] Source is confused with source 17
[Wed May 30 14:47:24 2012] Using EEF radius (= 10.99 ")to estimate initial spatial extent for simple fitting
[Wed May 30 14:47:24 2012] Initial guess for spatial extent in simple fitting = 10.99"
[Wed May 30 14:47:24 2012] source mask rpix=2.5, npix_max = 36, mask sum = 34, frac = 0.928
[Wed May 30 14:47:24 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 10.99"
[Wed May 30 15:40:41 2012] fullrun_mos1_xmm0022740301_pi300-10000_cl_pass1_src33.ximg exists
[Wed May 30 15:40:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740301_pi300-10000_cl_pass1_src33.csv
[Wed May 30 15:40:41 2012] fullrun_mos1_xmm0022740301_pi300-10000_cl_pass1_src33_1.ximg exists
[Wed May 30 15:40:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740301_pi300-10000_cl_pass1_src33.csv
[Wed May 30 15:40:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0022740301_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0022740301_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 15:40:41 2012] fullrun_mos1_xmm0022740301_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Wed May 30 15:40:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740301_pi300-10000_cl_pass1_tfrozen_src33.csv
[Wed May 30 15:40:41 2012] fullrun_mos1_xmm0022740301_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Wed May 30 15:40:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740301_pi300-10000_cl_pass1_tfrozen_src33.csv
[Wed May 30 15:40:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0022740301_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0022740301_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 16:33:53 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 18.471772 pixels away
[Wed May 30 16:33:53 2012] Vigneting correction estimate = 1.000000
[Wed May 30 16:33:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 16:33:53 2012] Assessing source extent using major
[Wed May 30 16:33:53 2012] Source does appear to be extended
[Wed May 30 16:33:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 17:44:40 2012] XMMSAS src. selection expression = ellipse(25848.061035, 14961.657684, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 30 17:44:40 2012] Writing source region out to fullrun_mos1_xmm0022740301_pi300-10000_pass1_cl_src39_src.reg
[Wed May 30 17:44:40 2012] Extracting stamp from image fullrun_mos1_xmm0022740301_pi300-10000_cl_sm2.00.img.gz, (260, 135) - (335, 210)
[Wed May 30 17:44:40 2012] XMMSAS bgd. selection expression = annulus(25848.061035, 14961.657684, 1087.500000, 2175.000000, X, Y) && !ellipse(25253.252167, 14786.867813, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 30 17:44:40 2012] Writing fullrun_mos1_xmm0022740301_pi300-10000_pass1_cl_src39.gif
[Wed May 30 17:53:49 2012] Mean detx,y = (7120.48, 5593.59) 
[Wed May 30 17:53:50 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 17:54:15 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 17:54:15 2012] Setting source spectrum file to fullrun_mos1_xmm0022740301_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Wed May 30 17:54:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0022740301_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Wed May 30 18:16:51 2012] Not generating rmf since there are only 35 counts
[Wed May 30 18:16:51 2012] rmf not generated due to insufficient counts
[Wed May 30 18:50:15 2012] Updating aperture counts using extracted products
[Wed May 30 18:50:15 2012] Error reading totcts from fullrun_mos1_xmm0022740301_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Wed May 30 18:50:15 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 18:50:15 2012] Using photon index=1.80, rate=0.00147, arf fullrun_mos1_xmm0022740301_pi300-10000_pass1_cl_src39.arf
[Wed May 30 18:50:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 18:50:15 2012] Updating source flux to 2.2e-14
[Wed May 30 18:50:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting