[Mon Jun 10 10:14:20 2013] Detection parameters:
  Position = (299.4, 485.7) = 10 52 45.08 57 44 1.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 178.3 +/- 30.8
  Background counts = 385.4
  Rate = 0.002 +/- 0.0004

[Mon Jun 10 10:14:23 2013] Off-axis axis estimate = 13.58'
[Mon Jun 10 10:14:53 2013] Using EEF radius (= 13.22 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 10:14:53 2013] Initial guess for spatial extent in simple fitting = 13.22"
[Mon Jun 10 10:14:53 2013] source mask rpix=3.0, npix_max = 50, mask sum = 43, frac = 0.859
[Mon Jun 10 10:14:53 2013] Giving source the simple spatial ID 34 for pass 0, mean size = 13.22"
[Mon Jun 10 10:14:55 2013] fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_src34.ximg exists
[Mon Jun 10 10:14:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_src34.csv
[Mon Jun 10 10:14:55 2013] fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_src34_1.ximg exists
[Mon Jun 10 10:14:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_src34.csv
[Mon Jun 10 10:14:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:14:56 2013] fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Mon Jun 10 10:14:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src34.csv
[Mon Jun 10 10:14:56 2013] fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Mon Jun 10 10:14:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src34.csv
[Mon Jun 10 10:14:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:15:15 2013] Source 38 is offset by 3.029052 and -2.219899 pixels which is larger than
2 X fitted extent = 1.991172 x 8.851357, not incorporating fit results
[Mon Jun 10 10:15:15 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:15:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:15:15 2013] Assessing source extent using major
[Mon Jun 10 10:15:15 2013] Source does appear to be extended
[Mon Jun 10 10:15:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:15:15 2013] Source is confused with source 16
[Mon Jun 10 10:15:40 2013] Using EEF radius (= 13.22 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 10:15:40 2013] Initial guess for spatial extent in simple fitting = 13.22"
[Mon Jun 10 10:15:40 2013] source mask rpix=3.0, npix_max = 50, mask sum = 43, frac = 0.859
[Mon Jun 10 10:15:40 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 13.22"
[Mon Jun 10 10:15:41 2013] fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_src33.ximg exists
[Mon Jun 10 10:15:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_src33.csv
[Mon Jun 10 10:15:41 2013] fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_src33_1.ximg exists
[Mon Jun 10 10:15:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_src33.csv
[Mon Jun 10 10:15:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:15:42 2013] fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Mon Jun 10 10:15:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Mon Jun 10 10:15:42 2013] fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Mon Jun 10 10:15:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Mon Jun 10 10:15:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:16:00 2013] Spatial fit model total counts = 2290.590000, observed total counts = 1351.000000
[Mon Jun 10 10:16:00 2013] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 10:16:00 2013] Spatial fit model total counts = 2158.190000, observed total counts = 1656.000000
[Mon Jun 10 10:16:00 2013] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 10:16:00 2013] Source 38 is offset by 2.675626 and -2.388490 pixels which is larger than
2 X fitted extent = 1.531982 x 1.531982, not incorporating fit results
[Mon Jun 10 10:16:00 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:16:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:16:00 2013] Assessing source extent using major
[Mon Jun 10 10:16:00 2013] Source does appear to be extended
[Mon Jun 10 10:16:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:16:26 2013] XMMSAS src. selection expression = ellipse(26002.639496, 42208.091370, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 10:16:26 2013] Not overwriting source region fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src38_src.reg
[Mon Jun 10 10:16:26 2013] Extracting stamp from image fullrun_pn_xmm0022740101_pi300-10000_cl_sm2.00.img.gz, (262, 448) - (337, 523)
[Mon Jun 10 10:16:26 2013] XMMSAS bgd. selection expression = annulus(26002.639496, 42208.091370, 1087.500000, 2175.000000, X, Y) && !ellipse(23454.403442, 39971.186707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26850.010681, 41920.010071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24162.951111, 42189.230042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25385.313324, 42407.707092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28446.854156, 41963.839294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28729.755493, 42602.517212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27357.657593, 42408.323059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26711.335846, 42497.266541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24916.841370, 42050.170227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27539.901459, 41889.527679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28159.070221, 42307.466461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25678.436523, 41712.827515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24294.574188, 41801.447083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25163.262000, 41239.488000, 2092.056060, 2092.056060, 0.000000, X, Y) && !ellipse(26955.686157, 41186.491852, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 10:16:26 2013] Writing fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src38.gif
[Mon Jun 10 10:16:33 2013] ../../xmm0022740101/products/events/fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src38_src.evt and ../../xmm0022740101/products/events/fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src38_bgd.evt exist, delete to re-create
[Mon Jun 10 10:16:33 2013] Mean detx,y = (-12605.06, 12852.38) 
[Mon Jun 10 10:16:33 2013] ../../xmm0022740101/products/images/fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src38_src.img and ../../xmm0022740101/products/images/fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src38_bgd.img exist, delete to re-create
[Mon Jun 10 10:16:33 2013] ../../xmm0022740101/products/spectra/fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src38_src_b10.pi.gz and ../../xmm0022740101/products/spectra/fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src38_bgd.pi exist, delete to re-create
[Mon Jun 10 10:16:33 2013] Setting source spectrum file to fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Mon Jun 10 10:16:33 2013] Setting bgd. spectrum file to fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Mon Jun 10 10:16:33 2013] ../../xmm0022740101/products/lightcurves/fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src38_src.lc and ../../xmm0022740101/products/lightcurves/fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src38_bgd.lc exist, delete to re-create
[Mon Jun 10 10:16:49 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 10:16:49 2013] rmf not generated due to insufficient counts
[Mon Jun 10 10:16:49 2013] fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src38.arf exists, delete to re-create
[Mon Jun 10 10:48:19 2013] Updating aperture counts using extracted products
[Mon Jun 10 10:48:19 2013] Total counts from fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src38_src_b10.pi.gz = 897.00
[Mon Jun 10 10:48:19 2013] Total counts from fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src38_bgd.pi.gz = 6.00
[Mon Jun 10 10:48:19 2013] Got source and background scale factors 1095700.000000, 0.000000
[Mon Jun 10 10:48:19 2013] Background scale factor is not positive, halting re-assessment of this source
[Mon Jun 10 10:48:29 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 10:48:29 2013] Using photon index=1.80, rate=0.00237, arf fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src38.arf
[Mon Jun 10 10:48:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 10:48:29 2013] Updating source flux to 2.3e-14
[Mon Jun 10 10:48:56 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 10:49:01 2013] xmm0022740101/analysis//spectral/fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete