[Mon Jun 10 10:14:20 2013] Detection parameters:
  Position = (388.0, 480.8) = 10 51 57.00 57 43 40.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 251.3 +/- 35.8
  Background counts = 420.5
  Rate = 0.003 +/- 0.0005

[Mon Jun 10 10:14:23 2013] Off-axis axis estimate = 14.73'
[Mon Jun 10 10:14:53 2013] Using EEF radius (= 13.79 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 10:14:53 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 10:14:53 2013] Initial guess for spatial extent in simple fitting = 13.79"
[Mon Jun 10 10:14:53 2013] source mask rpix=3.2, npix_max = 53, mask sum = 61, frac = 1.132
[Mon Jun 10 10:14:53 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 13.79"
[Mon Jun 10 10:14:54 2013] fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_src25.ximg exists
[Mon Jun 10 10:14:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_src25.csv
[Mon Jun 10 10:14:54 2013] fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_src25_1.ximg exists
[Mon Jun 10 10:14:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_src25.csv
[Mon Jun 10 10:14:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:14:56 2013] fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Mon Jun 10 10:14:56 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Mon Jun 10 10:14:56 2013] fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Mon Jun 10 10:14:56 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Mon Jun 10 10:14:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:15:15 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 16.357383 pixels away
[Mon Jun 10 10:15:15 2013] Warning, spatial fit 25 centroid is now closest to src. 26
[Mon Jun 10 10:15:15 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:15:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:15:15 2013] Assessing source extent using major
[Mon Jun 10 10:15:15 2013] Source does appear to be extended
[Mon Jun 10 10:15:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:15:40 2013] Using EEF radius (= 13.79 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 10:15:40 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 10:15:40 2013] Initial guess for spatial extent in simple fitting = 13.79"
[Mon Jun 10 10:15:40 2013] source mask rpix=3.2, npix_max = 53, mask sum = 61, frac = 1.132
[Mon Jun 10 10:15:40 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 13.79"
[Mon Jun 10 10:15:41 2013] fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_src24.ximg exists
[Mon Jun 10 10:15:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_src24.csv
[Mon Jun 10 10:15:41 2013] fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_src24_1.ximg exists
[Mon Jun 10 10:15:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_src24.csv
[Mon Jun 10 10:15:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:15:42 2013] fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Mon Jun 10 10:15:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Mon Jun 10 10:15:42 2013] fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Mon Jun 10 10:15:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Mon Jun 10 10:15:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:16:00 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 10.207502 pixels away
[Mon Jun 10 10:16:00 2013] Warning, spatial fit 24 centroid is now closest to src. 44
[Mon Jun 10 10:16:00 2013] Spatial fit model total counts = 2608.100000, observed total counts = 1965.000000
[Mon Jun 10 10:16:00 2013] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 10:16:00 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:16:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:16:00 2013] Assessing source extent using major
[Mon Jun 10 10:16:00 2013] Source does appear to be extended
[Mon Jun 10 10:16:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:16:26 2013] XMMSAS src. selection expression = ellipse(33704.762665, 41785.267334, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 10:16:26 2013] Not overwriting source region fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src29_src.reg
[Mon Jun 10 10:16:26 2013] Extracting stamp from image fullrun_pn_xmm0022740101_pi300-10000_cl_sm2.00.img.gz, (350, 443) - (425, 518)
[Mon Jun 10 10:16:26 2013] XMMSAS bgd. selection expression = annulus(33704.762665, 41785.267334, 1087.500000, 2175.000000, X, Y) && !ellipse(30670.104004, 42315.367828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32414.114000, 41878.304000, 1033.704030, 1033.704030, 0.000000, X, Y) && !ellipse(37402.346000, 38013.504000, 1675.464048, 1675.464048, 0.000000, X, Y) && !ellipse(31058.407349, 41731.521576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32133.370300, 41582.951447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34406.821442, 41270.897888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32308.705780, 39001.883301, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 10:16:26 2013] Writing fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src29.gif
[Mon Jun 10 10:16:32 2013] ../../xmm0022740101/products/events/fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src29_src.evt and ../../xmm0022740101/products/events/fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src29_bgd.evt exist, delete to re-create
[Mon Jun 10 10:16:32 2013] Mean detx,y = (-17695.61, 7017.67) 
[Mon Jun 10 10:16:32 2013] ../../xmm0022740101/products/images/fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src29_src.img and ../../xmm0022740101/products/images/fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src29_bgd.img exist, delete to re-create
[Mon Jun 10 10:16:32 2013] ../../xmm0022740101/products/spectra/fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src29_src_b10.pi.gz and ../../xmm0022740101/products/spectra/fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src29_bgd.pi exist, delete to re-create
[Mon Jun 10 10:16:32 2013] Setting source spectrum file to fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon Jun 10 10:16:32 2013] Setting bgd. spectrum file to fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Mon Jun 10 10:16:32 2013] ../../xmm0022740101/products/lightcurves/fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src29_src.lc and ../../xmm0022740101/products/lightcurves/fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src29_bgd.lc exist, delete to re-create
[Mon Jun 10 10:16:49 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 10:16:49 2013] rmf not generated due to insufficient counts
[Mon Jun 10 10:16:49 2013] fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src29.arf exists, delete to re-create
[Mon Jun 10 10:48:17 2013] Updating aperture counts using extracted products
[Mon Jun 10 10:48:17 2013] Total counts from fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 952.00
[Mon Jun 10 10:48:17 2013] Total counts from fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src29_bgd.pi.gz = 2845.00
[Mon Jun 10 10:48:17 2013] Got source and background scale factors 1041074.000000, 2890820.000000
[Mon Jun 10 10:48:17 2013] User source parameters:
  Position = (388.0, 480.8) = 10 51 57.00 57 43 40.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -72.6 +/- 31.9
  Background aperture counts = 1024.6
  Rate = -0.002 +/- 0.001

[Mon Jun 10 10:48:17 2013] Updating counts from extracted products
[Mon Jun 10 10:48:17 2013] Set source signif. to -72.57/32.01 = -2.27
[Mon Jun 10 10:48:29 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 10:48:29 2013] Using photon index=1.80, rate=-0.00233, arf fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src29.arf
[Mon Jun 10 10:48:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 10:48:29 2013] Updated flux is not positive, keeping original flux
[Mon Jun 10 10:48:56 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 10:49:01 2013] xmm0022740101/analysis//spectral/fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete