[Mon Jun 10 10:14:18 2013] Detection parameters:
  Position = (204.8, 403.0) = 10 53 36.34 57 38 2.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 899.6 +/- 44.8
  Background counts = 556.1
  Rate = 0.01 +/- 0.0006

[Mon Jun 10 10:14:23 2013] Off-axis axis estimate = 10.17'
[Mon Jun 10 10:14:53 2013] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 10:14:53 2013] Initial guess for spatial extent in simple fitting = 11.52"
[Mon Jun 10 10:14:53 2013] source mask rpix=2.6, npix_max = 39, mask sum = 35, frac = 0.883
[Mon Jun 10 10:14:53 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 11.52"
[Mon Jun 10 10:14:54 2013] fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_src2.ximg exists
[Mon Jun 10 10:14:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_src2.csv
[Mon Jun 10 10:14:54 2013] fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Jun 10 10:14:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_src2.csv
[Mon Jun 10 10:14:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:14:55 2013] fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Jun 10 10:14:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Jun 10 10:14:55 2013] fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Jun 10 10:14:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Jun 10 10:14:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:15:15 2013] Spatial fit model total counts = 2511.130000, observed total counts = 1996.000000
[Mon Jun 10 10:15:15 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 10:15:15 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:15:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:15:15 2013] Assessing source extent using major
[Mon Jun 10 10:15:15 2013] Source does appear to be extended
[Mon Jun 10 10:15:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:15:40 2013] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 10:15:40 2013] Initial guess for spatial extent in simple fitting = 11.52"
[Mon Jun 10 10:15:40 2013] source mask rpix=2.6, npix_max = 39, mask sum = 35, frac = 0.883
[Mon Jun 10 10:15:40 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 11.52"
[Mon Jun 10 10:15:40 2013] fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_src2.ximg exists
[Mon Jun 10 10:15:40 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_src2.csv
[Mon Jun 10 10:15:40 2013] fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Jun 10 10:15:40 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_src2.csv
[Mon Jun 10 10:15:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:15:42 2013] fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Jun 10 10:15:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Jun 10 10:15:42 2013] fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Jun 10 10:15:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Jun 10 10:15:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:16:00 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.657928 pixels away
[Mon Jun 10 10:16:00 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:16:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:16:00 2013] Assessing source extent using major
[Mon Jun 10 10:16:00 2013] Source does appear to be extended
[Mon Jun 10 10:16:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:16:25 2013] XMMSAS src. selection expression = ellipse(17771.686264, 35012.258392, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 10:16:25 2013] Not overwriting source region fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src2_src.reg
[Mon Jun 10 10:16:25 2013] Extracting stamp from image fullrun_pn_xmm0022740101_pi300-10000_cl_sm2.00.img.gz, (167, 365) - (242, 440)
[Mon Jun 10 10:16:25 2013] XMMSAS bgd. selection expression = annulus(17771.686264, 35012.258392, 1087.500000, 2175.000000, X, Y) && !ellipse(18954.304016, 36797.003601, 1740.000000, 1740.000000, 0.000000, X, Y)
[Mon Jun 10 10:16:25 2013] Writing fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src2.gif
[Mon Jun 10 10:16:27 2013] ../../xmm0022740101/products/events/fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0022740101/products/events/fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Mon Jun 10 10:16:28 2013] Mean detx,y = (-1722.58, 13676.08) 
[Mon Jun 10 10:16:28 2013] ../../xmm0022740101/products/images/fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src2_src.img and ../../xmm0022740101/products/images/fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Mon Jun 10 10:16:28 2013] ../../xmm0022740101/products/spectra/fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0022740101/products/spectra/fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Mon Jun 10 10:16:28 2013] Setting source spectrum file to fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Jun 10 10:16:28 2013] Setting bgd. spectrum file to fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Jun 10 10:16:28 2013] ../../xmm0022740101/products/lightcurves/fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0022740101/products/lightcurves/fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Mon Jun 10 10:16:49 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 10:16:49 2013] rmf not generated due to insufficient counts
[Mon Jun 10 10:16:49 2013] fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Mon Jun 10 10:48:10 2013] Updating aperture counts using extracted products
[Mon Jun 10 10:48:10 2013] Total counts from fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 1502.00
[Mon Jun 10 10:48:10 2013] Total counts from fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 5218.00
[Mon Jun 10 10:48:10 2013] Got source and background scale factors 1049778.000000, 3290431.000000
[Mon Jun 10 10:48:11 2013] User source parameters:
  Position = (204.8, 403.0) = 10 53 36.34 57 38 2.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -162.7 +/- 39.8
  Background aperture counts = 1664.7
  Rate = -0.005 +/- 0.001

[Mon Jun 10 10:48:11 2013] Updating counts from extracted products
[Mon Jun 10 10:48:11 2013] Set source signif. to -162.75/40.80 = -3.99
[Mon Jun 10 10:48:28 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 10:48:28 2013] Using photon index=1.80, rate=-0.00523, arf fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src2.arf
[Mon Jun 10 10:48:28 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 10:48:28 2013] Updated flux is not positive, keeping original flux
[Mon Jun 10 10:48:56 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 10:49:01 2013] xmm0022740101/analysis//spectral/fullrun_pn_xmm0022740101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete