[Mon Jun 10 10:14:25 2013] Detection parameters:
  Position = (309.3, 217.0) = 10 52 39.79 57 24 32.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1583.3 +/- 54.1
  Background counts = 312.7
  Rate = 0.02 +/- 0.0008

[Mon Jun 10 10:14:27 2013] Off-axis axis estimate = 5.95'
[Mon Jun 10 10:14:58 2013] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 10:14:58 2013] Initial guess for spatial extent in simple fitting = 9.41"
[Mon Jun 10 10:14:58 2013] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.058
[Mon Jun 10 10:14:58 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 9.41"
[Mon Jun 10 10:14:59 2013] fullrun_mos2_xmm0022740101_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jun 10 10:14:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022740101_pi300-10000_cl_pass0_src3.csv
[Mon Jun 10 10:14:59 2013] fullrun_mos2_xmm0022740101_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jun 10 10:14:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022740101_pi300-10000_cl_pass0_src3.csv
[Mon Jun 10 10:14:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0022740101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0022740101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:14:59 2013] fullrun_mos2_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jun 10 10:14:59 2013] fullrun_mos2_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jun 10 10:14:59 2013] Fit fullrun_mos2_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Jun 10 10:15:25 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.132175 pixels away
[Mon Jun 10 10:15:25 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:15:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:15:25 2013] Assessing source extent using major
[Mon Jun 10 10:15:25 2013] Source does appear to be extended
[Mon Jun 10 10:15:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:15:44 2013] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 10:15:44 2013] Initial guess for spatial extent in simple fitting = 9.41"
[Mon Jun 10 10:15:44 2013] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.058
[Mon Jun 10 10:15:44 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 9.41"
[Mon Jun 10 10:15:45 2013] fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jun 10 10:15:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_src3.csv
[Mon Jun 10 10:15:45 2013] fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jun 10 10:15:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_src3.csv
[Mon Jun 10 10:15:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:15:45 2013] fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jun 10 10:15:45 2013] fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jun 10 10:15:45 2013] Fit fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Jun 10 10:16:10 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 11.351141 pixels away
[Mon Jun 10 10:16:10 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:16:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:16:10 2013] Assessing source extent using major
[Mon Jun 10 10:16:10 2013] Source does appear to be extended
[Mon Jun 10 10:16:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:16:56 2013] Counts = 1583.267822, rescaling region sizes by 2.000000
[Mon Jun 10 10:16:56 2013] XMMSAS src. selection expression = ellipse(26859.056366, 18832.401001, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun 10 10:16:56 2013] Not overwriting source region fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src6_src.reg
[Mon Jun 10 10:16:56 2013] Extracting stamp from image fullrun_mos2_xmm0022740101_pi300-10000_cl_sm2.00.img.gz, (234, 142) - (384, 292)
[Mon Jun 10 10:16:56 2013] XMMSAS bgd. selection expression = annulus(26859.056366, 18832.401001, 4350.000000, 8700.000000, X, Y) && !ellipse(17922.639282, 20235.574692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18453.866837, 19282.902390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25574.906311, 14877.815842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24484.348927, 17849.681839, 396.571657, 358.204095, 0.167582, X, Y) && !ellipse(35681.567383, 23163.598083, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(35273.091125, 26116.625214, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(30730.771423, 18254.320145, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(27299.791229, 14844.260254, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26427.594600, 27748.248400, 283.892808, 283.892808, 0.000000, X, Y) && !ellipse(30172.726746, 20181.214294, 3480.000000, 3480.000000, 0.000000, X, Y) && !ellipse(22066.858900, 23387.945000, 278.328808, 278.328808, 0.000000, X, Y) && !ellipse(22960.428000, 24669.606600, 483.856014, 483.856014, 0.000000, X, Y) && !ellipse(30605.353149, 13774.201141, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 10:16:56 2013] Writing fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src6.gif
[Mon Jun 10 10:16:57 2013] ../../xmm0022740101/products/events/fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src6_src.evt and ../../xmm0022740101/products/events/fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src6_bgd.evt exist, delete to re-create
[Mon Jun 10 10:16:57 2013] Mean detx,y = (-3120.82, 4047.35) 
[Mon Jun 10 10:16:57 2013] ../../xmm0022740101/products/images/fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src6_src.img and ../../xmm0022740101/products/images/fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src6_bgd.img exist, delete to re-create
[Mon Jun 10 10:16:57 2013] ../../xmm0022740101/products/spectra/fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src6_src_b10.pi.gz and ../../xmm0022740101/products/spectra/fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src6_bgd.pi exist, delete to re-create
[Mon Jun 10 10:16:57 2013] Setting source spectrum file to fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Jun 10 10:16:57 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon Jun 10 10:16:57 2013] ../../xmm0022740101/products/lightcurves/fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src6_src.lc and ../../xmm0022740101/products/lightcurves/fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src6_bgd.lc exist, delete to re-create
[Mon Jun 10 10:30:56 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 10:30:56 2013] rmf not generated due to insufficient counts
[Mon Jun 10 10:48:38 2013] Updating aperture counts using extracted products
[Mon Jun 10 10:48:38 2013] Total counts from fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 4217.00
[Mon Jun 10 10:48:39 2013] Total counts from fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src6_bgd.pi.gz = 85712.00
[Mon Jun 10 10:48:39 2013] Got source and background scale factors 5181740.000000, 144707073.000000
[Mon Jun 10 10:48:39 2013] User source parameters:
  Position = (309.3, 217.0) = 10 52 39.79 57 24 32.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1147.8 +/- 65.9
  Background aperture counts = 3069.2
  Rate = 0.02 +/- 0.001

[Mon Jun 10 10:48:39 2013] Updating counts from extracted products
[Mon Jun 10 10:48:39 2013] Set source signif. to 1147.78/55.40 = 20.72
[Mon Jun 10 10:48:45 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 10:48:45 2013] Using photon index=1.80, rate=0.0199, arf fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src6.arf
[Mon Jun 10 10:48:45 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 10:48:45 2013] Updating source flux to 2.3e-13
[Mon Jun 10 10:48:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 10:48:56 2013] xmm0022740101/analysis//spectral/fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete