[Mon Jun 10 10:14:26 2013] Detection parameters:
  Position = (175.2, 252.4) = 10 53 52.06 57 27 6.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 195.7 +/- 26.2
  Background counts = 291.2
  Rate = 0.004 +/- 0.0006

[Mon Jun 10 10:14:27 2013] Off-axis axis estimate = 9.54'
[Mon Jun 10 10:14:58 2013] Using EEF radius (= 11.20 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 10:14:58 2013] Initial guess for spatial extent in simple fitting = 11.20"
[Mon Jun 10 10:14:58 2013] source mask rpix=2.6, npix_max = 37, mask sum = 33, frac = 0.873
[Mon Jun 10 10:14:58 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 11.20"
[Mon Jun 10 10:14:59 2013] fullrun_mos2_xmm0022740101_pi300-10000_cl_pass0_src13.ximg exists
[Mon Jun 10 10:14:59 2013] fullrun_mos2_xmm0022740101_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon Jun 10 10:14:59 2013] Fit fullrun_mos2_xmm0022740101_pi300-10000_cl_pass0_src13 appears to have run properly
[Mon Jun 10 10:14:59 2013] fullrun_mos2_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon Jun 10 10:14:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Mon Jun 10 10:14:59 2013] fullrun_mos2_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Jun 10 10:14:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Mon Jun 10 10:14:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:15:25 2013] Warning, spatial fit 13 centroid is now closest to src. 19
[Mon Jun 10 10:15:25 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:15:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:15:25 2013] Assessing source extent using major
[Mon Jun 10 10:15:25 2013] Source does appear to be extended
[Mon Jun 10 10:15:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:15:44 2013] Using EEF radius (= 11.20 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 10:15:44 2013] Initial guess for spatial extent in simple fitting = 11.20"
[Mon Jun 10 10:15:44 2013] source mask rpix=2.6, npix_max = 37, mask sum = 33, frac = 0.873
[Mon Jun 10 10:15:44 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 11.20"
[Mon Jun 10 10:15:45 2013] fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_src13.ximg exists
[Mon Jun 10 10:15:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_src13.csv
[Mon Jun 10 10:15:45 2013] fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_src13_1.ximg exists
[Mon Jun 10 10:15:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_src13.csv
[Mon Jun 10 10:15:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:15:45 2013] fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Mon Jun 10 10:15:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Mon Jun 10 10:15:45 2013] fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Mon Jun 10 10:15:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Mon Jun 10 10:15:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:16:10 2013] Spatial fit model total counts = 1340.950000, observed total counts = 1138.000000
[Mon Jun 10 10:16:10 2013] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 10:16:10 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:16:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:16:10 2013] Assessing source extent using major
[Mon Jun 10 10:16:10 2013] Source does appear to be extended
[Mon Jun 10 10:16:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:16:56 2013] XMMSAS src. selection expression = ellipse(15192.714264, 21906.594376, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 10:16:56 2013] Not overwriting source region fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src21_src.reg
[Mon Jun 10 10:16:56 2013] Extracting stamp from image fullrun_mos2_xmm0022740101_pi300-10000_cl_sm2.00.img.gz, (138, 215) - (213, 290)
[Mon Jun 10 10:16:56 2013] XMMSAS bgd. selection expression = annulus(15192.714264, 21906.594376, 1087.500000, 2175.000000, X, Y) && !ellipse(17922.639282, 20235.574692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16338.062042, 23893.316956, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 10:16:56 2013] Writing fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src21.gif
[Mon Jun 10 10:19:45 2013] Mean detx,y = (-9213.34, -6263.31) 
[Mon Jun 10 10:19:47 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 10:20:08 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 10:20:08 2013] Setting source spectrum file to fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Mon Jun 10 10:20:08 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Mon Jun 10 10:35:39 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 10:35:39 2013] rmf not generated due to insufficient counts
[Mon Jun 10 10:48:41 2013] Updating aperture counts using extracted products
[Mon Jun 10 10:48:41 2013] Total counts from fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 779.00
[Mon Jun 10 10:48:41 2013] Total counts from fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src21_bgd.pi.gz = 5818.00
[Mon Jun 10 10:48:41 2013] Got source and background scale factors 1145674.000000, 9942618.000000
[Mon Jun 10 10:48:41 2013] User source parameters:
  Position = (175.2, 252.4) = 10 53 52.06 57 27 6.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 108.6 +/- 28.9
  Background aperture counts = 670.4
  Rate = 0.002 +/- 0.0005

[Mon Jun 10 10:48:41 2013] Updating counts from extracted products
[Mon Jun 10 10:48:41 2013] Set source signif. to 108.60/25.89 = 4.19
[Mon Jun 10 10:48:46 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 10:48:46 2013] Using photon index=1.80, rate=0.00188, arf fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src21.arf
[Mon Jun 10 10:48:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 10:48:46 2013] Updating source flux to 3.9e-14
[Mon Jun 10 10:48:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 10:48:56 2013] xmm0022740101/analysis//spectral/fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete