[Mon Jun 10 10:14:26 2013] Detection parameters:
  Position = (188.4, 275.2) = 10 53 45.01 57 28 39.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 340.6 +/- 29.1
  Background counts = 296.1
  Rate = 0.004 +/- 0.0003

[Mon Jun 10 10:14:27 2013] Off-axis axis estimate = 8.16'
[Mon Jun 10 10:14:58 2013] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 10:14:58 2013] Initial guess for spatial extent in simple fitting = 10.51"
[Mon Jun 10 10:14:58 2013] source mask rpix=2.4, npix_max = 33, mask sum = 26, frac = 0.765
[Mon Jun 10 10:14:58 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 10.51"
[Mon Jun 10 10:14:59 2013] fullrun_mos2_xmm0022740101_pi300-10000_cl_pass0_src15.ximg exists
[Mon Jun 10 10:14:59 2013] fullrun_mos2_xmm0022740101_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon Jun 10 10:14:59 2013] Fit fullrun_mos2_xmm0022740101_pi300-10000_cl_pass0_src15 appears to have run properly
[Mon Jun 10 10:14:59 2013] fullrun_mos2_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon Jun 10 10:14:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Mon Jun 10 10:14:59 2013] fullrun_mos2_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Jun 10 10:14:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Mon Jun 10 10:14:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:15:25 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 13.263868 pixels away
[Mon Jun 10 10:15:25 2013] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 13.782343 pixels away
[Mon Jun 10 10:15:25 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:15:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:15:25 2013] Assessing source extent using major
[Mon Jun 10 10:15:25 2013] Source does appear to be extended
[Mon Jun 10 10:15:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:15:44 2013] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 10:15:44 2013] Initial guess for spatial extent in simple fitting = 10.51"
[Mon Jun 10 10:15:44 2013] source mask rpix=2.4, npix_max = 33, mask sum = 26, frac = 0.765
[Mon Jun 10 10:15:44 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 10.51"
[Mon Jun 10 10:15:45 2013] fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_src15.ximg exists
[Mon Jun 10 10:15:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_src15.csv
[Mon Jun 10 10:15:45 2013] fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_src15_1.ximg exists
[Mon Jun 10 10:15:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_src15.csv
[Mon Jun 10 10:15:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:15:45 2013] fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Mon Jun 10 10:15:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Mon Jun 10 10:15:45 2013] fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Mon Jun 10 10:15:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Mon Jun 10 10:15:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:16:10 2013] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 13.782343 pixels away
[Mon Jun 10 10:16:10 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:16:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:16:10 2013] Assessing source extent using major
[Mon Jun 10 10:16:10 2013] Source does appear to be extended
[Mon Jun 10 10:16:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:16:56 2013] XMMSAS src. selection expression = ellipse(16338.062042, 23893.316956, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 10:16:56 2013] Not overwriting source region fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src19_src.reg
[Mon Jun 10 10:16:56 2013] Extracting stamp from image fullrun_mos2_xmm0022740101_pi300-10000_cl_sm2.00.img.gz, (151, 238) - (226, 313)
[Mon Jun 10 10:16:56 2013] XMMSAS bgd. selection expression = annulus(16338.062042, 23893.316956, 1087.500000, 2175.000000, X, Y) && !ellipse(17150.332413, 26627.436920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15694.333240, 26023.853600, 297.786409, 297.786409, 0.000000, X, Y) && !ellipse(15192.714264, 21906.594376, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 10:16:56 2013] Writing fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src19.gif
[Mon Jun 10 10:20:34 2013] Mean detx,y = (-7059.03, -7049.62) 
[Mon Jun 10 10:20:35 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 10:20:56 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 10:20:56 2013] Setting source spectrum file to fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Jun 10 10:20:56 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Mon Jun 10 10:39:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 10:39:10 2013] rmf not generated due to insufficient counts
[Mon Jun 10 10:48:41 2013] Updating aperture counts using extracted products
[Mon Jun 10 10:48:41 2013] Total counts from fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 799.00
[Mon Jun 10 10:48:41 2013] Total counts from fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src19_bgd.pi.gz = 5562.00
[Mon Jun 10 10:48:41 2013] Got source and background scale factors 1074844.000000, 9496736.000000
[Mon Jun 10 10:48:41 2013] User source parameters:
  Position = (188.4, 275.2) = 10 53 45.01 57 28 39.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 169.5 +/- 29.3
  Background aperture counts = 629.5
  Rate = 0.003 +/- 0.0005

[Mon Jun 10 10:48:41 2013] Updating counts from extracted products
[Mon Jun 10 10:48:41 2013] Set source signif. to 169.49/25.09 = 6.76
[Mon Jun 10 10:48:46 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 10:48:46 2013] Using photon index=1.80, rate=0.00293, arf fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src19.arf
[Mon Jun 10 10:48:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 10:48:46 2013] Updating source flux to 5.3e-14
[Mon Jun 10 10:48:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 10:48:56 2013] xmm0022740101/analysis//spectral/fullrun_mos2_xmm0022740101_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete