[Mon Jun 10 10:14:23 2013] Detection parameters: Position = (204.5, 402.9) = 10 53 36.53 57 38 1.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 434.8 +/- 33.4 Background counts = 242.2 Rate = 0.005 +/- 0.0004 [Mon Jun 10 10:14:25 2013] Off-axis axis estimate = 10.18' [Mon Jun 10 10:14:57 2013] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting [Mon Jun 10 10:14:57 2013] Initial guess for spatial extent in simple fitting = 11.52" [Mon Jun 10 10:14:57 2013] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.059 [Mon Jun 10 10:14:57 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 11.52" [Mon Jun 10 10:14:58 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src11.ximg exists [Mon Jun 10 10:14:58 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src11.csv [Mon Jun 10 10:14:58 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src11_1.ximg exists [Mon Jun 10 10:14:58 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src11.csv [Mon Jun 10 10:14:58 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src11_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 10 10:14:58 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists [Mon Jun 10 10:14:58 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists [Mon Jun 10 10:14:58 2013] Fit fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly [Mon Jun 10 10:15:20 2013] Spatial fit model total counts = 1127.810000, observed total counts = 1127.000000 [Mon Jun 10 10:15:20 2013] Offset between fit and detection position for source 7 = 0.095293 pixels [Mon Jun 10 10:15:20 2013] 1126.962000 total counts/ 969.250000 bgd. counts: snr = 5.065786 Spatial fit parameters: Offset between fit and detection position for source 7 = 0.095293 pixels Position = (204.4, 403.0) = 10 53 36.55 57 38 0.6 Extent = 4.0 (3.3-5.0)", rotation angle = 0 Source counts = 157.7 +/- 33.6 Background counts = 969.2 Rate = 0.003 +/- 0.0006 [Mon Jun 10 10:15:20 2013] Vigneting correction estimate = 1.000000 [Mon Jun 10 10:15:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 10 10:15:20 2013] Assessing source extent using major axis lower bound [Mon Jun 10 10:15:20 2013] Source does appear to be extended [Mon Jun 10 10:15:20 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 10 10:15:43 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Mon Jun 10 10:15:43 2013] Initial guess for spatial extent in simple fitting = 4.03" [Mon Jun 10 10:15:43 2013] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.736 [Mon Jun 10 10:15:43 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 4.03" [Mon Jun 10 10:15:44 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src11.ximg exists [Mon Jun 10 10:15:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src11.csv [Mon Jun 10 10:15:44 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src11_1.ximg exists [Mon Jun 10 10:15:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src11.csv [Mon Jun 10 10:15:44 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src11_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 10 10:15:44 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists [Mon Jun 10 10:15:44 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists [Mon Jun 10 10:15:44 2013] Fit fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly [Mon Jun 10 10:16:05 2013] Spatial fit model total counts = 1111.000000, observed total counts = 1111.000000 [Mon Jun 10 10:16:05 2013] Offset between fit and detection position for source 7 = 0.006312 pixels [Mon Jun 10 10:16:05 2013] 1109.477000 total counts/ 949.160000 bgd. counts: snr = 5.203671 Spatial fit parameters: Offset between fit and detection position for source 7 = 0.006312 pixels Position = (204.4, 403.0) = 10 53 36.55 57 38 0.6 Extent = 4.1 (3.3-5.1)", rotation angle = 0 Source counts = 160.3 +/- 33.3 Background counts = 949.2 Rate = 0.003 +/- 0.0006 [Mon Jun 10 10:16:05 2013] Vigneting correction estimate = 1.000000 [Mon Jun 10 10:16:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 10 10:16:05 2013] Assessing source extent using major axis lower bound [Mon Jun 10 10:16:05 2013] Source does appear to be extended [Mon Jun 10 10:16:05 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 10 10:16:49 2013] XMMSAS src. selection expression = ellipse(17736.969400, 35008.252800, 248.403007, 248.403007, 0.000000, X, Y) [Mon Jun 10 10:16:49 2013] Not overwriting source region fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src7_src.reg [Mon Jun 10 10:16:49 2013] Extracting stamp from image fullrun_mos1_xmm0022740101_pi300-10000_cl_sm2.00.img.gz, (190, 389) - (219, 417) [Mon Jun 10 10:16:49 2013] XMMSAS bgd. selection expression = annulus(17736.969400, 35008.252800, 414.005012, 828.010024, X, Y) [Mon Jun 10 10:16:49 2013] Writing fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src7.gif [Mon Jun 10 10:16:50 2013] ../../xmm0022740101/products/events/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src7_src.evt and ../../xmm0022740101/products/events/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src7_bgd.evt exist, delete to re-create [Mon Jun 10 10:16:50 2013] Mean detx,y = (-13617.66, -2050.43) [Mon Jun 10 10:16:50 2013] ../../xmm0022740101/products/images/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src7_src.img and ../../xmm0022740101/products/images/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src7_bgd.img exist, delete to re-create [Mon Jun 10 10:16:50 2013] ../../xmm0022740101/products/spectra/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src7_src_b10.pi.gz and ../../xmm0022740101/products/spectra/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src7_bgd.pi exist, delete to re-create [Mon Jun 10 10:16:50 2013] Setting source spectrum file to fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src7_src_b10.pi.gz [Mon Jun 10 10:16:50 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src7_bgd.pi.gz [Mon Jun 10 10:16:50 2013] ../../xmm0022740101/products/lightcurves/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src7_src.lc and ../../xmm0022740101/products/lightcurves/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src7_bgd.lc exist, delete to re-create [Mon Jun 10 10:16:55 2013] fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src7.rmf exists, delete to re-create [Mon Jun 10 10:16:55 2013] fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src7.arf exists, delete to re-create [Mon Jun 10 10:48:33 2013] Updating aperture counts using extracted products [Mon Jun 10 10:48:33 2013] Total counts from fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 265.00 [Mon Jun 10 10:48:33 2013] Total counts from fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src7_bgd.pi.gz = 803.00 [Mon Jun 10 10:48:33 2013] Got source and background scale factors 195200.000000, 1629540.000000 [Mon Jun 10 10:48:33 2013] User source parameters: Position = (204.4, 403.0) = 10 53 36.55 57 38 0.6 Extent = 4.1 (3.3-5.1)", rotation angle = 0 Source aperture counts = 168.8 +/- 17.3 Background aperture counts = 96.2 Rate = 0.003 +/- 0.0003 [Mon Jun 10 10:48:37 2013] Calculating source flux in energy range 0.30-8.00 [Mon Jun 10 10:48:37 2013] Using photon index=1.80, rate=0.00286, arf fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src7.arf [Mon Jun 10 10:48:37 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon Jun 10 10:48:37 2013] Updating source flux to 9.1e-14 [Mon Jun 10 10:48:54 2013] xmm0022740101/analysis//spectral/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete