[Mon Jun 10 10:14:25 2013] Detection parameters:
  Position = (271.2, 459.5) = 10 53 0.44 57 42 9.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 369.5 +/- 28.2
  Background counts = 198.6
  Rate = 0.004 +/- 0.0003

[Mon Jun 10 10:14:25 2013] Off-axis axis estimate = 11.85'
[Mon Jun 10 10:14:57 2013] Using EEF radius (= 12.35 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 10:14:57 2013] Initial guess for spatial extent in simple fitting = 12.35"
[Mon Jun 10 10:14:57 2013] source mask rpix=2.8, npix_max = 44, mask sum = 32, frac = 0.717
[Mon Jun 10 10:14:57 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 12.35"
[Mon Jun 10 10:14:58 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src14.ximg exists
[Mon Jun 10 10:14:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src14.csv
[Mon Jun 10 10:14:58 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src14_1.ximg exists
[Mon Jun 10 10:14:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src14.csv
[Mon Jun 10 10:14:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:14:58 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Mon Jun 10 10:14:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Mon Jun 10 10:14:58 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Mon Jun 10 10:14:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Mon Jun 10 10:14:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:15:20 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 17.214480 pixels away
[Mon Jun 10 10:15:20 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:15:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:15:20 2013] Assessing source extent using major
[Mon Jun 10 10:15:20 2013] Source does appear to be extended
[Mon Jun 10 10:15:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:15:43 2013] Using EEF radius (= 12.35 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 10:15:43 2013] Initial guess for spatial extent in simple fitting = 12.35"
[Mon Jun 10 10:15:43 2013] source mask rpix=2.8, npix_max = 44, mask sum = 32, frac = 0.717
[Mon Jun 10 10:15:43 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 12.35"
[Mon Jun 10 10:15:44 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src14.ximg exists
[Mon Jun 10 10:15:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src14.csv
[Mon Jun 10 10:15:44 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src14_1.ximg exists
[Mon Jun 10 10:15:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src14.csv
[Mon Jun 10 10:15:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:15:44 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Mon Jun 10 10:15:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Mon Jun 10 10:15:44 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Mon Jun 10 10:15:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Mon Jun 10 10:15:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:16:05 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 14.848477 pixels away
[Mon Jun 10 10:16:05 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:16:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:16:05 2013] Assessing source extent using major
[Mon Jun 10 10:16:05 2013] Source does appear to be extended
[Mon Jun 10 10:16:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:16:49 2013] XMMSAS src. selection expression = ellipse(23541.576019, 39929.932861, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 10:16:49 2013] Not overwriting source region fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src29_src.reg
[Mon Jun 10 10:16:49 2013] Extracting stamp from image fullrun_mos1_xmm0022740101_pi300-10000_cl_sm2.00.img.gz, (234, 422) - (309, 497)
[Mon Jun 10 10:16:49 2013] XMMSAS bgd. selection expression = annulus(23541.576019, 39929.932861, 1087.500000, 2175.000000, X, Y)
[Mon Jun 10 10:16:49 2013] Writing fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src29.gif
[Mon Jun 10 10:16:50 2013] ../../xmm0022740101/products/events/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src29_src.evt and ../../xmm0022740101/products/events/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src29_bgd.evt exist, delete to re-create
[Mon Jun 10 10:16:50 2013] Mean detx,y = (-12799.19, -9650.36) 
[Mon Jun 10 10:16:50 2013] ../../xmm0022740101/products/images/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src29_src.img and ../../xmm0022740101/products/images/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src29_bgd.img exist, delete to re-create
[Mon Jun 10 10:16:50 2013] ../../xmm0022740101/products/spectra/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src29_src_b10.pi.gz and ../../xmm0022740101/products/spectra/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src29_bgd.pi exist, delete to re-create
[Mon Jun 10 10:16:50 2013] Setting source spectrum file to fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon Jun 10 10:16:50 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Mon Jun 10 10:16:50 2013] ../../xmm0022740101/products/lightcurves/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src29_src.lc and ../../xmm0022740101/products/lightcurves/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src29_bgd.lc exist, delete to re-create
[Mon Jun 10 10:16:55 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 10:16:55 2013] rmf not generated due to insufficient counts
[Mon Jun 10 10:16:55 2013] fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src29.arf exists, delete to re-create
[Mon Jun 10 10:48:33 2013] Updating aperture counts using extracted products
[Mon Jun 10 10:48:33 2013] Total counts from fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 580.00
[Mon Jun 10 10:48:34 2013] Total counts from fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src29_bgd.pi.gz = 2278.00
[Mon Jun 10 10:48:34 2013] Got source and background scale factors 859394.000000, 5173969.000000
[Mon Jun 10 10:48:34 2013] User source parameters:
  Position = (271.2, 459.5) = 10 53 0.44 57 42 9.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 201.6 +/- 25.1
  Background aperture counts = 378.4
  Rate = 0.004 +/- 0.0004

[Mon Jun 10 10:48:34 2013] Updating counts from extracted products
[Mon Jun 10 10:48:34 2013] Set source signif. to 201.63/19.45 = 10.37
[Mon Jun 10 10:48:37 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 10:48:37 2013] Using photon index=1.80, rate=0.0036, arf fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src29.arf
[Mon Jun 10 10:48:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 10:48:37 2013] Updating source flux to 1.6e-13
[Mon Jun 10 10:48:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 10:48:54 2013] xmm0022740101/analysis//spectral/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete