[Mon Jun 10 10:14:25 2013] Detection parameters:
  Position = (283.8, 211.0) = 10 52 53.50 57 24 7.4
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 273.9 +/- 23.3
  Background counts = 1062.3
  Rate = 0.005 +/- 0.0004

[Mon Jun 10 10:14:25 2013] Off-axis axis estimate = 6.43'
[Mon Jun 10 10:14:57 2013] Using EEF radius (= 9.64 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 10:14:57 2013] Initial guess for spatial extent in simple fitting = 9.64"
[Mon Jun 10 10:14:57 2013] source mask rpix=2.2, npix_max = 29, mask sum = 22, frac = 0.745
[Mon Jun 10 10:14:57 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 9.64"
[Mon Jun 10 10:14:58 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src13.ximg exists
[Mon Jun 10 10:14:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src13.csv
[Mon Jun 10 10:14:58 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon Jun 10 10:14:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src13.csv
[Mon Jun 10 10:14:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:14:58 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon Jun 10 10:14:58 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Jun 10 10:14:58 2013] Fit fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Mon Jun 10 10:15:20 2013] Source 27 is offset by 2.156100 and 4.845461 pixels which is larger than
2 X fitted extent = 1.108179 x 1.108179, not incorporating fit results
[Mon Jun 10 10:15:20 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:15:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:15:20 2013] Assessing source extent using major
[Mon Jun 10 10:15:20 2013] Source does appear to be extended
[Mon Jun 10 10:15:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:15:43 2013] Using EEF radius (= 9.64 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 10:15:43 2013] Initial guess for spatial extent in simple fitting = 9.64"
[Mon Jun 10 10:15:43 2013] source mask rpix=2.2, npix_max = 29, mask sum = 22, frac = 0.745
[Mon Jun 10 10:15:43 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 9.64"
[Mon Jun 10 10:15:44 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src13.ximg exists
[Mon Jun 10 10:15:44 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src13.csv
[Mon Jun 10 10:15:44 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src13_1.ximg exists
[Mon Jun 10 10:15:44 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src13.csv
[Mon Jun 10 10:15:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:15:44 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Mon Jun 10 10:15:44 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Mon Jun 10 10:15:44 2013] Fit fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Mon Jun 10 10:16:05 2013] Source 27 is offset by 2.128858 and 4.885116 pixels which is larger than
2 X fitted extent = 1.108179 x 1.108179, not incorporating fit results
[Mon Jun 10 10:16:05 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:16:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:16:05 2013] Assessing source extent using major
[Mon Jun 10 10:16:05 2013] Source does appear to be extended
[Mon Jun 10 10:16:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:16:49 2013] XMMSAS src. selection expression = ellipse(24642.462677, 18311.143082, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun 10 10:16:49 2013] Not overwriting source region fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src27_src.reg
[Mon Jun 10 10:16:49 2013] Extracting stamp from image fullrun_mos1_xmm0022740101_pi300-10000_cl_sm2.00.img.gz, (209, 136) - (359, 286)
[Mon Jun 10 10:16:49 2013] XMMSAS bgd. selection expression = annulus(24642.462677, 18311.143082, 2175.000000, 4350.000000, X, Y) && !ellipse(26873.043060, 18623.971909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25504.826813, 14880.311569, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 10:16:49 2013] Writing fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src27.gif
[Mon Jun 10 10:16:50 2013] ../../xmm0022740101/products/events/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src27_src.evt and ../../xmm0022740101/products/events/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src27_bgd.evt exist, delete to re-create
[Mon Jun 10 10:16:50 2013] Mean detx,y = (2984.00, 4919.57) 
[Mon Jun 10 10:16:50 2013] ../../xmm0022740101/products/images/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src27_src.img and ../../xmm0022740101/products/images/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src27_bgd.img exist, delete to re-create
[Mon Jun 10 10:16:50 2013] ../../xmm0022740101/products/spectra/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src27_src_b10.pi.gz and ../../xmm0022740101/products/spectra/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src27_bgd.pi exist, delete to re-create
[Mon Jun 10 10:16:50 2013] Setting source spectrum file to fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Mon Jun 10 10:16:50 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Mon Jun 10 10:16:50 2013] ../../xmm0022740101/products/lightcurves/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src27_src.lc and ../../xmm0022740101/products/lightcurves/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src27_bgd.lc exist, delete to re-create
[Mon Jun 10 10:16:55 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 10:16:55 2013] rmf not generated due to insufficient counts
[Mon Jun 10 10:16:55 2013] fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src27.arf exists, delete to re-create
[Mon Jun 10 10:48:33 2013] Updating aperture counts using extracted products
[Mon Jun 10 10:48:33 2013] Total counts from fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 2824.00
[Mon Jun 10 10:48:33 2013] Total counts from fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src27_bgd.pi.gz = 21686.00
[Mon Jun 10 10:48:33 2013] Got source and background scale factors 4603144.000000, 37379129.000000
[Mon Jun 10 10:48:33 2013] User source parameters:
  Position = (283.8, 211.0) = 10 52 53.50 57 24 7.4
  Extent = 21.7" x 21.7", rotation angle = 0
  Source aperture counts = 153.4 +/- 54.1
  Background aperture counts = 2670.6
  Rate = 0.003 +/- 0.001

[Mon Jun 10 10:48:33 2013] Updating counts from extracted products
[Mon Jun 10 10:48:33 2013] Set source signif. to 153.42/51.68 = 2.97
[Mon Jun 10 10:48:37 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 10:48:37 2013] Using photon index=1.80, rate=0.00274, arf fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src27.arf
[Mon Jun 10 10:48:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 10:48:37 2013] Updating source flux to 3.1e-14
[Mon Jun 10 10:48:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 10:48:54 2013] xmm0022740101/analysis//spectral/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete