[Mon Jun 10 10:14:24 2013] Detection parameters:
  Position = (151.6, 163.0) = 10 54 4.56 57 20 36.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 246.3 +/- 29.5
  Background counts = 207.8
  Rate = 0.003 +/- 0.0004

[Mon Jun 10 10:14:25 2013] Off-axis axis estimate = 14.49'
[Mon Jun 10 10:14:57 2013] Using EEF radius (= 13.67 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 10:14:57 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 10:14:57 2013] Initial guess for spatial extent in simple fitting = 13.67"
[Mon Jun 10 10:14:57 2013] source mask rpix=3.1, npix_max = 53, mask sum = 56, frac = 1.055
[Mon Jun 10 10:14:57 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 13.67"
[Mon Jun 10 10:14:58 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src20.ximg exists
[Mon Jun 10 10:14:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src20.csv
[Mon Jun 10 10:14:58 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src20_1.ximg exists
[Mon Jun 10 10:14:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src20.csv
[Mon Jun 10 10:14:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:14:58 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Mon Jun 10 10:14:58 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Mon Jun 10 10:14:58 2013] Fit fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Mon Jun 10 10:15:20 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 17.053914 pixels away
[Mon Jun 10 10:15:20 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:15:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:15:20 2013] Assessing source extent using major
[Mon Jun 10 10:15:20 2013] Source does appear to be extended
[Mon Jun 10 10:15:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:15:43 2013] Using EEF radius (= 13.67 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 10:15:43 2013] Initial guess for spatial extent in simple fitting = 13.67"
[Mon Jun 10 10:15:43 2013] source mask rpix=3.1, npix_max = 53, mask sum = 56, frac = 1.055
[Mon Jun 10 10:15:43 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 13.67"
[Mon Jun 10 10:15:44 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src20.ximg exists
[Mon Jun 10 10:15:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src20.csv
[Mon Jun 10 10:15:44 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src20_1.ximg exists
[Mon Jun 10 10:15:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src20.csv
[Mon Jun 10 10:15:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:15:44 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Mon Jun 10 10:15:44 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Mon Jun 10 10:15:44 2013] Fit fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Mon Jun 10 10:16:05 2013] Spatial fit model total counts = 1346.100000, observed total counts = 1251.000000
[Mon Jun 10 10:16:05 2013] Offset between fit and detection position for source 23 = 0.370154 pixels
[Mon Jun 10 10:16:05 2013] 1344.458700 total counts/ 1258.720000 bgd. counts: snr = 2.416642
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.370154 pixels
  Position = (151.3, 162.7) = 10 54 4.69 57 20 34.6
  Extent = 6.0 (3.4-9.3)", rotation angle = 0
  Source counts = 85.7 +/- 36.7
  Background counts = 1258.7
  Rate = 0.002 +/- 0.0007
[Mon Jun 10 10:16:05 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:16:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:16:05 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 10:16:05 2013] Source does appear to be extended
[Mon Jun 10 10:16:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:16:49 2013] XMMSAS src. selection expression = ellipse(13116.227440, 14106.244400, 360.916810, 360.916810, 0.000000, X, Y)
[Mon Jun 10 10:16:49 2013] Not overwriting source region fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src23_src.reg
[Mon Jun 10 10:16:49 2013] Extracting stamp from image fullrun_mos1_xmm0022740101_pi300-10000_cl_sm2.00.img.gz, (131, 142) - (172, 183)
[Mon Jun 10 10:16:49 2013] XMMSAS bgd. selection expression = annulus(13116.227440, 14106.244400, 601.528017, 1203.056035, X, Y)
[Mon Jun 10 10:16:49 2013] Writing fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src23.gif
[Mon Jun 10 10:16:50 2013] ../../xmm0022740101/products/events/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src23_src.evt and ../../xmm0022740101/products/events/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src23_bgd.evt exist, delete to re-create
[Mon Jun 10 10:16:50 2013] Mean detx,y = (-2161.23, 16045.34) 
[Mon Jun 10 10:16:50 2013] ../../xmm0022740101/products/images/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src23_src.img and ../../xmm0022740101/products/images/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src23_bgd.img exist, delete to re-create
[Mon Jun 10 10:16:50 2013] ../../xmm0022740101/products/spectra/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src23_src_b10.pi.gz and ../../xmm0022740101/products/spectra/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src23_bgd.pi exist, delete to re-create
[Mon Jun 10 10:16:50 2013] Setting source spectrum file to fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon Jun 10 10:16:50 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Mon Jun 10 10:16:50 2013] ../../xmm0022740101/products/lightcurves/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src23_src.lc and ../../xmm0022740101/products/lightcurves/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src23_bgd.lc exist, delete to re-create
[Mon Jun 10 10:16:55 2013] Not generating rmf since there are only 85 counts
[Mon Jun 10 10:16:55 2013] rmf not generated due to insufficient counts
[Mon Jun 10 10:16:55 2013] fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src23.arf exists, delete to re-create
[Mon Jun 10 10:48:35 2013] Updating aperture counts using extracted products
[Mon Jun 10 10:48:35 2013] Total counts from fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 279.00
[Mon Jun 10 10:48:35 2013] Total counts from fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src23_bgd.pi.gz = 1233.00
[Mon Jun 10 10:48:35 2013] Got source and background scale factors 362988.000000, 2674939.000000
[Mon Jun 10 10:48:35 2013] User source parameters:
  Position = (151.3, 162.7) = 10 54 4.69 57 20 34.6
  Extent = 6.0 (3.4-9.3)", rotation angle = 0
  Source aperture counts = 111.7 +/- 17.7
  Background aperture counts = 167.3
  Rate = 0.002 +/- 0.0003

[Mon Jun 10 10:48:38 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 10:48:38 2013] Using photon index=1.80, rate=0.00153, arf fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src23.arf
[Mon Jun 10 10:48:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 10:48:38 2013] Updating source flux to 4.5e-14
[Mon Jun 10 10:48:49 2013] Source 23 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 10:48:54 2013] xmm0022740101/analysis//spectral/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete