[Mon Jun 10 10:14:24 2013] Detection parameters:
  Position = (141.2, 301.1) = 10 54 10.50 57 30 36.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 178.2 +/- 28.6
  Background counts = 257.6
  Rate = 0.002 +/- 0.0003

[Mon Jun 10 10:14:25 2013] Off-axis axis estimate = 11.40'
[Mon Jun 10 10:14:57 2013] Using EEF radius (= 12.13 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 10:14:57 2013] Initial guess for spatial extent in simple fitting = 12.13"
[Mon Jun 10 10:14:57 2013] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.971
[Mon Jun 10 10:14:57 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 12.13"
[Mon Jun 10 10:14:58 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src27.ximg exists
[Mon Jun 10 10:14:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src27.csv
[Mon Jun 10 10:14:58 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src27_1.ximg exists
[Mon Jun 10 10:14:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src27.csv
[Mon Jun 10 10:14:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:14:58 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Mon Jun 10 10:14:58 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Mon Jun 10 10:14:58 2013] Fit fullrun_mos1_xmm0022740101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Mon Jun 10 10:15:20 2013] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 14.891360 pixels away
[Mon Jun 10 10:15:20 2013] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 14.077068 pixels away
[Mon Jun 10 10:15:20 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:15:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:15:20 2013] Assessing source extent using major
[Mon Jun 10 10:15:20 2013] Source does appear to be extended
[Mon Jun 10 10:15:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 10:15:20 2013] Source is confused with source 14
[Mon Jun 10 10:15:43 2013] Using EEF radius (= 12.13 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 10:15:43 2013] Initial guess for spatial extent in simple fitting = 12.13"
[Mon Jun 10 10:15:43 2013] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.971
[Mon Jun 10 10:15:43 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 12.13"
[Mon Jun 10 10:15:44 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src27.ximg exists
[Mon Jun 10 10:15:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src27.csv
[Mon Jun 10 10:15:44 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src27_1.ximg exists
[Mon Jun 10 10:15:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src27.csv
[Mon Jun 10 10:15:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 10:15:44 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Mon Jun 10 10:15:44 2013] fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Mon Jun 10 10:15:44 2013] Fit fullrun_mos1_xmm0022740101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Mon Jun 10 10:16:05 2013] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 14.890866 pixels away
[Mon Jun 10 10:16:05 2013] Spatial fit model total counts = 1270.330000, observed total counts = 1269.000000
[Mon Jun 10 10:16:05 2013] Offset between fit and detection position for source 17 = 1.489688 pixels
[Mon Jun 10 10:16:05 2013] Warning, changing simple spatial fit ID from 27 to 29
[Mon Jun 10 10:16:05 2013] 1243.653000 total counts/ 1116.170000 bgd. counts: snr = 3.815813
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.489688 pixels
  Position = (140.6, 302.5) = 10 54 10.82 57 30 42.3
  Extent = 21.5 (15.9-24.4)" x 5.2 (3.4-7.7)", rotation angle = 75 (62-86) degrees
  Source counts = 127.5 +/- 35.3
  Background counts = 1116.2
  Rate = 0.002 +/- 0.0006
[Mon Jun 10 10:16:05 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 10:16:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 10:16:05 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 10:16:05 2013] Source does appear to be extended
[Mon Jun 10 10:16:05 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.08
[Mon Jun 10 10:16:05 2013] Source is asymmetric
[Mon Jun 10 10:16:49 2013] XMMSAS src. selection expression = ellipse(12187.841600, 26265.976000, 1292.862037, 311.745609, 74.924400, X, Y)
[Mon Jun 10 10:16:49 2013] Not overwriting source region fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src17_src.reg
[Mon Jun 10 10:16:49 2013] Extracting stamp from image fullrun_mos1_xmm0022740101_pi300-10000_cl_sm2.00.img.gz, (66, 228) - (215, 377)
[Mon Jun 10 10:16:50 2013] XMMSAS bgd. selection expression = annulus(12187.841600, 26265.976000, 2154.770062, 4309.540124, X, Y) && !ellipse(16345.861191, 23796.891602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15764.476151, 26032.527161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15230.399750, 21858.491882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12107.124176, 26553.467804, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 10:16:50 2013] Writing fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src17.gif
[Mon Jun 10 10:16:50 2013] ../../xmm0022740101/products/events/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src17_src.evt and ../../xmm0022740101/products/events/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src17_bgd.evt exist, delete to re-create
[Mon Jun 10 10:16:50 2013] Mean detx,y = (-11407.36, 8044.77) 
[Mon Jun 10 10:16:50 2013] ../../xmm0022740101/products/images/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src17_src.img and ../../xmm0022740101/products/images/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src17_bgd.img exist, delete to re-create
[Mon Jun 10 10:16:50 2013] ../../xmm0022740101/products/spectra/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src17_src_b10.pi.gz and ../../xmm0022740101/products/spectra/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src17_bgd.pi exist, delete to re-create
[Mon Jun 10 10:16:50 2013] Setting source spectrum file to fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Jun 10 10:16:50 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Mon Jun 10 10:16:50 2013] ../../xmm0022740101/products/lightcurves/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src17_src.lc and ../../xmm0022740101/products/lightcurves/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src17_bgd.lc exist, delete to re-create
[Mon Jun 10 10:16:55 2013] fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src17.rmf exists, delete to re-create
[Mon Jun 10 10:16:55 2013] fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src17.arf exists, delete to re-create
[Mon Jun 10 10:48:36 2013] Updating aperture counts using extracted products
[Mon Jun 10 10:48:36 2013] Total counts from fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 795.00
[Mon Jun 10 10:48:36 2013] Total counts from fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src17_bgd.pi.gz = 14325.00
[Mon Jun 10 10:48:36 2013] Got source and background scale factors 1263960.000000, 28195377.000000
[Mon Jun 10 10:48:36 2013] User source parameters:
  Position = (140.6, 302.5) = 10 54 10.82 57 30 42.3
  Extent = 21.5 (15.9-24.4)" x 5.2 (3.4-7.7)", rotation angle = 75 (62-86) degrees
  Source aperture counts = 152.8 +/- 29.2
  Background aperture counts = 642.2
  Rate = 0.003 +/- 0.0005

[Mon Jun 10 10:48:38 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 10:48:38 2013] Using photon index=1.80, rate=0.00228, arf fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src17.arf
[Mon Jun 10 10:48:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 10:48:38 2013] Updating source flux to 5.3e-14
[Mon Jun 10 10:48:49 2013] Flag c found in src. 17 procflags, skipping spectral fitting
[Mon Jun 10 10:48:54 2013] xmm0022740101/analysis//spectral/fullrun_mos1_xmm0022740101_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete