[Sun Oct  9 13:26:45 2011] Detection parameters:
  Position = (450.2, 336.6) = 7 22 38.85 85 43 18.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.8 +/- 10.3
  Background counts = 16.1
  Rate = 0.002 +/- 0.0004

[Sun Oct  9 13:26:46 2011] Off-axis axis estimate = 11.35'
[Sun Oct  9 16:08:33 2011] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting
[Sun Oct  9 16:08:33 2011] Initial guess for spatial extent in simple fitting = 12.10"
[Sun Oct  9 16:08:33 2011] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.137
[Sun Oct  9 16:08:33 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 12.10"
[Sun Oct  9 17:00:18 2011] fullrun_mos2_xmm0022340201_pi300-10000_cl_pass0_src28.ximg exists
[Sun Oct  9 17:00:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022340201_pi300-10000_cl_pass0_src28.csv
[Sun Oct  9 17:00:18 2011] fullrun_mos2_xmm0022340201_pi300-10000_cl_pass0_src28_1.ximg exists
[Sun Oct  9 17:00:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0022340201_pi300-10000_cl_pass0_src28.csv
[Sun Oct  9 17:00:18 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0022340201_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0022340201_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  9 17:00:18 2011] fullrun_mos2_xmm0022340201_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sun Oct  9 17:00:18 2011] fullrun_mos2_xmm0022340201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sun Oct  9 17:00:18 2011] Fit fullrun_mos2_xmm0022340201_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Sun Oct  9 17:00:40 2011] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 15.886439 pixels away
[Sun Oct  9 17:00:40 2011] Vigneting correction estimate = 1.000000
[Sun Oct  9 17:00:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  9 17:00:40 2011] Assessing source extent using major
[Sun Oct  9 17:00:40 2011] Source does appear to be extended
[Sun Oct  9 17:00:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  9 19:35:32 2011] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting
[Sun Oct  9 19:35:32 2011] Initial guess for spatial extent in simple fitting = 12.10"
[Sun Oct  9 19:35:32 2011] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.137
[Sun Oct  9 19:35:32 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 12.10"
[Sun Oct  9 20:21:05 2011] fullrun_mos2_xmm0022340201_pi300-10000_cl_pass1_src28.ximg exists
[Sun Oct  9 20:21:05 2011] fullrun_mos2_xmm0022340201_pi300-10000_cl_pass1_src28_1.ximg exists
[Sun Oct  9 20:21:05 2011] Fit fullrun_mos2_xmm0022340201_pi300-10000_cl_pass1_src28 appears to have run properly
[Sun Oct  9 20:21:05 2011] fullrun_mos2_xmm0022340201_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sun Oct  9 20:21:05 2011] fullrun_mos2_xmm0022340201_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sun Oct  9 20:21:05 2011] Fit fullrun_mos2_xmm0022340201_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Sun Oct  9 20:21:25 2011] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 15.886439 pixels away
[Sun Oct  9 20:21:25 2011] Vigneting correction estimate = 1.000000
[Sun Oct  9 20:21:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  9 20:21:25 2011] Assessing source extent using major
[Sun Oct  9 20:21:25 2011] Source does appear to be extended
[Sun Oct  9 20:21:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  9 23:53:49 2011] XMMSAS src. selection expression = ellipse(39123.127869, 29235.987274, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Oct  9 23:53:49 2011] Writing source region out to fullrun_mos2_xmm0022340201_pi300-10000_pass1_cl_src27_src.reg
[Sun Oct  9 23:53:49 2011] Extracting stamp from image fullrun_mos2_xmm0022340201_pi300-10000_cl_sm2.00.img.gz, (413, 299) - (488, 374)
[Sun Oct  9 23:53:49 2011] XMMSAS bgd. selection expression = annulus(39123.127869, 29235.987274, 1087.500000, 2175.000000, X, Y) && !ellipse(39140.329800, 27694.478200, 442.573613, 442.573613, 0.000000, X, Y)
[Sun Oct  9 23:53:49 2011] Writing fullrun_mos2_xmm0022340201_pi300-10000_pass1_cl_src27.gif
[Mon Oct 10 00:01:01 2011] Mean detx,y = (-11977.95, -4960.71) 
[Mon Oct 10 00:01:02 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Oct 10 00:01:12 2011] Binned source spectrum to 10 counts/bin
[Mon Oct 10 00:01:12 2011] Setting source spectrum file to fullrun_mos2_xmm0022340201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Mon Oct 10 00:01:12 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0022340201_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Mon Oct 10 00:31:03 2011] Not generating rmf since there are only 47 counts
[Mon Oct 10 00:31:03 2011] rmf not generated due to insufficient counts
[Mon Oct 10 00:39:45 2011] Updating aperture counts using extracted products
[Mon Oct 10 00:39:45 2011] Error reading totcts from fullrun_mos2_xmm0022340201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Mon Oct 10 00:39:46 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 00:39:46 2011] Using photon index=1.80, rate=0.00174, arf fullrun_mos2_xmm0022340201_pi300-10000_pass1_cl_src27.arf
[Mon Oct 10 00:39:46 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Oct 10 00:39:46 2011] Updating source flux to 3.3e-14
[Mon Oct 10 00:40:47 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting