[Sun Oct  9 13:26:42 2011] Detection parameters:
  Position = (430.8, 461.8) = 7 23 35.79 85 52 25.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.6 +/- 10.8
  Background counts = 10.7
  Rate = 0.001 +/- 0.0002

[Sun Oct  9 13:26:43 2011] Off-axis axis estimate = 15.24'
[Sun Oct  9 15:04:21 2011] Using EEF radius (= 14.05 ")to estimate initial spatial extent for simple fitting
[Sun Oct  9 15:04:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct  9 15:04:21 2011] Initial guess for spatial extent in simple fitting = 14.05"
[Sun Oct  9 15:04:21 2011] source mask rpix=3.2, npix_max = 55, mask sum = 42, frac = 0.755
[Sun Oct  9 15:04:21 2011] Giving source the simple spatial ID 43 for pass 0, mean size = 14.05"
[Sun Oct  9 16:08:33 2011] fullrun_mos1_xmm0022340201_pi300-10000_cl_pass0_src43.ximg exists
[Sun Oct  9 16:08:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022340201_pi300-10000_cl_pass0_src43.csv
[Sun Oct  9 16:08:33 2011] fullrun_mos1_xmm0022340201_pi300-10000_cl_pass0_src43_1.ximg exists
[Sun Oct  9 16:08:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022340201_pi300-10000_cl_pass0_src43.csv
[Sun Oct  9 16:08:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0022340201_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0022340201_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  9 16:08:33 2011] fullrun_mos1_xmm0022340201_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Sun Oct  9 16:08:33 2011] fullrun_mos1_xmm0022340201_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Sun Oct  9 16:08:33 2011] Fit fullrun_mos1_xmm0022340201_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Sun Oct  9 17:00:35 2011] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 16.472874 pixels away
[Sun Oct  9 17:00:35 2011] Vigneting correction estimate = 1.000000
[Sun Oct  9 17:00:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  9 17:00:35 2011] Assessing source extent using major
[Sun Oct  9 17:00:35 2011] Source does appear to be extended
[Sun Oct  9 17:00:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  9 18:29:59 2011] Using EEF radius (= 14.05 ")to estimate initial spatial extent for simple fitting
[Sun Oct  9 18:29:59 2011] Initial guess for spatial extent in simple fitting = 14.05"
[Sun Oct  9 18:29:59 2011] source mask rpix=3.2, npix_max = 55, mask sum = 42, frac = 0.755
[Sun Oct  9 18:29:59 2011] Giving source the simple spatial ID 42 for pass 1, mean size = 14.05"
[Sun Oct  9 19:35:32 2011] fullrun_mos1_xmm0022340201_pi300-10000_cl_pass1_src42.ximg exists
[Sun Oct  9 19:35:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022340201_pi300-10000_cl_pass1_src42.csv
[Sun Oct  9 19:35:32 2011] fullrun_mos1_xmm0022340201_pi300-10000_cl_pass1_src42_1.ximg exists
[Sun Oct  9 19:35:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022340201_pi300-10000_cl_pass1_src42.csv
[Sun Oct  9 19:35:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0022340201_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0022340201_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  9 19:35:32 2011] fullrun_mos1_xmm0022340201_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Sun Oct  9 19:35:32 2011] fullrun_mos1_xmm0022340201_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Sun Oct  9 19:35:32 2011] Fit fullrun_mos1_xmm0022340201_pi300-10000_cl_pass1_tfrozen_src42 appears to have run properly
[Sun Oct  9 20:21:20 2011] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 16.817609 pixels away
[Sun Oct  9 20:21:20 2011] Vigneting correction estimate = 1.000000
[Sun Oct  9 20:21:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  9 20:21:20 2011] Assessing source extent using major
[Sun Oct  9 20:21:20 2011] Source does appear to be extended
[Sun Oct  9 20:21:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  9 23:03:21 2011] XMMSAS src. selection expression = ellipse(37427.052673, 40124.047363, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Oct  9 23:03:21 2011] Writing source region out to fullrun_mos1_xmm0022340201_pi300-10000_pass1_cl_src12_src.reg
[Sun Oct  9 23:03:21 2011] Extracting stamp from image fullrun_mos1_xmm0022340201_pi300-10000_cl_sm2.00.img.gz, (393, 424) - (468, 499)
[Sun Oct  9 23:03:21 2011] XMMSAS bgd. selection expression = annulus(37427.052673, 40124.047363, 1087.500000, 2175.000000, X, Y)
[Sun Oct  9 23:03:21 2011] Writing fullrun_mos1_xmm0022340201_pi300-10000_pass1_cl_src12.gif
[Sun Oct  9 23:11:57 2011] Mean detx,y = (5550.66, 15432.47) 
[Sun Oct  9 23:11:58 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Oct  9 23:12:10 2011] Binned source spectrum to 10 counts/bin
[Sun Oct  9 23:12:10 2011] Setting source spectrum file to fullrun_mos1_xmm0022340201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun Oct  9 23:12:10 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0022340201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sun Oct  9 23:50:19 2011] Not generating rmf since there are only 65 counts
[Sun Oct  9 23:50:19 2011] rmf not generated due to insufficient counts
[Mon Oct 10 00:39:45 2011] Updating aperture counts using extracted products
[Mon Oct 10 00:39:45 2011] Error reading totcts from fullrun_mos1_xmm0022340201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon Oct 10 00:39:45 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 00:39:45 2011] Using photon index=1.80, rate=0.00122, arf fullrun_mos1_xmm0022340201_pi300-10000_pass1_cl_src12.arf
[Mon Oct 10 00:39:45 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Oct 10 00:39:45 2011] Updating source flux to 2.9e-14
[Mon Oct 10 00:39:48 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting