[Mon Sep 26 02:17:20 2011] Detection parameters:
  Position = (249.5, 283.5) = 20 18 45.49 -70 51 30.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.0 +/- 15.7
  Background counts = 91.8
  Rate = 0.005 +/- 0.0007

[Mon Sep 26 02:17:21 2011] Off-axis axis estimate = 3.71'
[Mon Sep 26 02:20:05 2011] Using EEF radius (= 8.28 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 02:20:05 2011] Initial guess for spatial extent in simple fitting = 8.28"
[Mon Sep 26 02:20:05 2011] source mask rpix=1.9, npix_max = 23, mask sum = 24, frac = 1.038
[Mon Sep 26 02:20:05 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 8.28"
[Mon Sep 26 02:58:36 2011] fullrun_pn_xmm0022340101_pi300-10000_cl_pass0_src15.ximg exists
[Mon Sep 26 02:58:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022340101_pi300-10000_cl_pass0_src15.csv
[Mon Sep 26 02:58:36 2011] fullrun_pn_xmm0022340101_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon Sep 26 02:58:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022340101_pi300-10000_cl_pass0_src15.csv
[Mon Sep 26 02:58:36 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0022340101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0022340101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 02:58:36 2011] fullrun_pn_xmm0022340101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon Sep 26 02:58:36 2011] fullrun_pn_xmm0022340101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Sep 26 02:58:36 2011] Fit fullrun_pn_xmm0022340101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Mon Sep 26 03:37:17 2011] Source 16 is offset by -4.062501 and 0.737772 pixels which is larger than
2 X fitted extent = 2.259977 x 2.259977, not incorporating fit results
[Mon Sep 26 03:37:17 2011] Spatial fit model total counts = 685.761000, observed total counts = 687.000000
[Mon Sep 26 03:37:17 2011] Offset between fit and detection position for source 16 = 3.060113 pixels
[Mon Sep 26 03:37:17 2011] 689.419000 total counts/ 445.164000 bgd. counts: snr = 11.576664
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 3.060113 pixels
  Position = (246.5, 282.8) = 20 18 48.15 -70 51 37.6
  Extent = 16.6 (16.5-33.1)", rotation angle = 0
  Source counts = 244.3 +/- 26.3
  Background counts = 445.2
  Rate = 0.01 +/- 0.001
[Mon Sep 26 03:37:17 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 03:37:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 03:37:17 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 03:37:17 2011] Source does appear to be extended
[Mon Sep 26 03:37:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 03:37:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 03:37:30 2011] Initial guess for spatial extent in simple fitting = 16.57"
[Mon Sep 26 03:37:30 2011] source mask rpix=3.8, npix_max = 74, mask sum = 66, frac = 0.889
[Mon Sep 26 03:37:30 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 16.57"
[Mon Sep 26 04:27:24 2011] fullrun_pn_xmm0022340101_pi300-10000_cl_pass1_src14.ximg exists
[Mon Sep 26 04:27:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022340101_pi300-10000_cl_pass1_src14.csv
[Mon Sep 26 04:27:24 2011] fullrun_pn_xmm0022340101_pi300-10000_cl_pass1_src14_1.ximg exists
[Mon Sep 26 04:27:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022340101_pi300-10000_cl_pass1_src14.csv
[Mon Sep 26 04:27:24 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0022340101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0022340101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 04:27:25 2011] fullrun_pn_xmm0022340101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Mon Sep 26 04:27:25 2011] fullrun_pn_xmm0022340101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Mon Sep 26 04:27:25 2011] Fit fullrun_pn_xmm0022340101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Mon Sep 26 05:08:53 2011] Warning, spatial fit 14 centroid is now closest to src. 13
[Mon Sep 26 05:08:53 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 05:08:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 05:08:53 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 05:08:53 2011] Source does appear to be extended
[Mon Sep 26 05:08:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 05:09:05 2011] XMMSAS src. selection expression = ellipse(21396.248000, 24559.096000, 994.080029, 994.080029, 0.000000, X, Y)
[Mon Sep 26 05:09:05 2011] Writing source region out to fullrun_pn_xmm0022340101_pi300-10000_pass1_cl_src16_src.reg
[Mon Sep 26 05:09:05 2011] Extracting stamp from image fullrun_pn_xmm0022340101_pi300-10000_cl_sm2.00.img.gz, (189, 226) - (304, 340)
[Mon Sep 26 05:09:05 2011] XMMSAS bgd. selection expression = annulus(21396.248000, 24559.096000, 1656.800048, 3313.600095, X, Y) && !ellipse(24296.290000, 24662.916200, 1134.992033, 1134.992033, 0.000000, X, Y) && !ellipse(22573.307200, 24986.916000, 1286.200037, 440.596813, 16.249700, X, Y) && !ellipse(19677.795517, 26222.098907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22949.180000, 25122.777200, 1558.384045, 1558.384045, 0.000000, X, Y) && !ellipse(22411.513245, 24285.833832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23585.110000, 23182.138000, 1230.200035, 1230.200035, 0.000000, X, Y)
[Mon Sep 26 05:09:05 2011] Writing fullrun_pn_xmm0022340101_pi300-10000_pass1_cl_src16.gif
[Mon Sep 26 05:23:47 2011] Mean detx,y = (2347.18, -1581.92) 
[Mon Sep 26 05:23:51 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Sep 26 05:24:21 2011] Binned source spectrum to 10 counts/bin
[Mon Sep 26 05:24:21 2011] Setting source spectrum file to fullrun_pn_xmm0022340101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Mon Sep 26 05:24:21 2011] Setting bgd. spectrum file to fullrun_pn_xmm0022340101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Mon Sep 26 09:16:08 2011] Updating aperture counts using extracted products
[Mon Sep 26 09:16:08 2011] Error reading totcts from fullrun_pn_xmm0022340101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Mon Sep 26 09:16:08 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 09:16:08 2011] Using photon index=1.80, rate=0.011, arf fullrun_pn_xmm0022340101_pi300-10000_pass1_cl_src16.arf
[Mon Sep 26 09:16:08 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Sep 26 09:16:08 2011] Updating source flux to 2.7e-14
[Mon Sep 26 09:17:09 2011] Flag b found in src. 16 procflags, skipping spectral fitting