[Mon Sep 26 02:17:20 2011] Detection parameters:
  Position = (353.8, 246.3) = 20 17 13.07 -70 54 35.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 316.8 +/- 38.1
  Background counts = 73.5
  Rate = 0.01 +/- 0.001

[Mon Sep 26 02:17:21 2011] Off-axis axis estimate = 5.52'
[Mon Sep 26 02:20:05 2011] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 02:20:05 2011] Initial guess for spatial extent in simple fitting = 9.19"
[Mon Sep 26 02:20:05 2011] source mask rpix=2.1, npix_max = 27, mask sum = 19, frac = 0.696
[Mon Sep 26 02:20:05 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 9.19"
[Mon Sep 26 02:58:36 2011] fullrun_pn_xmm0022340101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Sep 26 02:58:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022340101_pi300-10000_cl_pass0_src1.csv
[Mon Sep 26 02:58:36 2011] fullrun_pn_xmm0022340101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Sep 26 02:58:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0022340101_pi300-10000_cl_pass0_src1.csv
[Mon Sep 26 02:58:36 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0022340101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0022340101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 02:58:36 2011] fullrun_pn_xmm0022340101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Sep 26 02:58:36 2011] fullrun_pn_xmm0022340101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Sep 26 02:58:36 2011] Fit fullrun_pn_xmm0022340101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Sep 26 03:37:17 2011] Spatial fit model total counts = 457.996000, observed total counts = 458.000000
[Mon Sep 26 03:37:17 2011] Offset between fit and detection position for source 1 = 1.722374 pixels
[Mon Sep 26 03:37:17 2011] 457.979100 total counts/ 369.661000 bgd. counts: snr = 4.593544
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.722374 pixels
  Position = (353.3, 244.6) = 20 17 13.59 -70 54 23.8
  Extent = 4.5 (3.6-5.4)", rotation angle = 0
  Source counts = 88.3 +/- 21.4
  Background counts = 369.7
  Rate = 0.004 +/- 0.001
[Mon Sep 26 03:37:17 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 03:37:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 03:37:17 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 03:37:17 2011] Source does appear to be extended
[Mon Sep 26 03:37:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 03:37:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 03:37:30 2011] Initial guess for spatial extent in simple fitting = 4.54"
[Mon Sep 26 03:37:30 2011] source mask rpix=1.0, npix_max = 9, mask sum = 4, frac = 0.419
[Mon Sep 26 03:37:30 2011] Skipping simple spatial due to low active detector fraction
[Mon Sep 26 05:08:53 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 05:08:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 05:08:53 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 05:08:53 2011] Source does appear to be extended
[Mon Sep 26 05:08:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 05:09:05 2011] XMMSAS src. selection expression = ellipse(30686.099260, 21234.067400, 272.658608, 272.658608, 0.000000, X, Y)
[Mon Sep 26 05:09:05 2011] Writing source region out to fullrun_pn_xmm0022340101_pi300-10000_pass1_cl_src1_src.reg
[Mon Sep 26 05:09:05 2011] Extracting stamp from image fullrun_pn_xmm0022340101_pi300-10000_cl_sm2.00.img.gz, (338, 229) - (369, 260)
[Mon Sep 26 05:09:05 2011] XMMSAS bgd. selection expression = annulus(30686.099260, 21234.067400, 454.431013, 908.862026, X, Y)
[Mon Sep 26 05:09:05 2011] Writing fullrun_pn_xmm0022340101_pi300-10000_pass1_cl_src1.gif
[Mon Sep 26 05:09:18 2011] Mean detx,y = (-7302.50, -846.02) 
[Mon Sep 26 05:09:21 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Sep 26 05:09:41 2011] Binned source spectrum to 10 counts/bin
[Mon Sep 26 05:09:41 2011] Setting source spectrum file to fullrun_pn_xmm0022340101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Sep 26 05:09:41 2011] Setting bgd. spectrum file to fullrun_pn_xmm0022340101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Sep 26 05:29:07 2011] Not generating rmf since there are only 88 counts
[Mon Sep 26 05:29:07 2011] rmf not generated due to insufficient counts
[Mon Sep 26 09:16:07 2011] Updating aperture counts using extracted products
[Mon Sep 26 09:16:07 2011] Error reading totcts from fullrun_pn_xmm0022340101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Sep 26 09:16:08 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 09:16:08 2011] Using photon index=1.80, rate=0.00396, arf fullrun_pn_xmm0022340101_pi300-10000_pass1_cl_src1.arf
[Mon Sep 26 09:16:08 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Sep 26 09:16:08 2011] Updating source flux to 2.7e-14
[Mon Sep 26 09:17:09 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Sep 26 09:18:23 2011] xmm0022340101/analysis//spectral/fullrun_pn_xmm0022340101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete