[Mon Sep 26 02:17:40 2011] Detection parameters:
  Position = (279.9, 284.9) = 20 18 18.63 -70 51 29.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1298.5 +/- 47.0
  Background counts = 47.4
  Rate = 0.04 +/- 0.001

[Mon Sep 26 02:17:41 2011] Off-axis axis estimate = 1.67'
[Mon Sep 26 02:58:36 2011] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 02:58:36 2011] Initial guess for spatial extent in simple fitting = 7.26"
[Mon Sep 26 02:58:36 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Mon Sep 26 02:58:36 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Mon Sep 26 03:19:10 2011] fullrun_mos1_xmm0022340101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Sep 26 03:19:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022340101_pi300-10000_cl_pass0_src1.csv
[Mon Sep 26 03:19:10 2011] fullrun_mos1_xmm0022340101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Sep 26 03:19:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0022340101_pi300-10000_cl_pass0_src1.csv
[Mon Sep 26 03:19:10 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0022340101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0022340101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 03:19:10 2011] fullrun_mos1_xmm0022340101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Sep 26 03:19:10 2011] fullrun_mos1_xmm0022340101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Sep 26 03:19:10 2011] Fit fullrun_mos1_xmm0022340101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Sep 26 03:37:20 2011] Source 1 is offset by -6.825784 and 5.533181 pixels which is larger than
2 X fitted extent = 0.834828 x 0.834828, not incorporating fit results
[Mon Sep 26 03:37:20 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 03:37:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 03:37:20 2011] Assessing source extent using major
[Mon Sep 26 03:37:20 2011] Source does appear to be extended
[Mon Sep 26 03:37:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 04:27:25 2011] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 04:27:25 2011] Initial guess for spatial extent in simple fitting = 7.26"
[Mon Sep 26 04:27:25 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Mon Sep 26 04:27:25 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.26"
[Mon Sep 26 04:47:09 2011] fullrun_mos1_xmm0022340101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Sep 26 04:47:09 2011] fullrun_mos1_xmm0022340101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Sep 26 04:47:09 2011] Fit fullrun_mos1_xmm0022340101_pi300-10000_cl_pass1_src1 appears to have run properly
[Mon Sep 26 04:47:09 2011] fullrun_mos1_xmm0022340101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Sep 26 04:47:09 2011] fullrun_mos1_xmm0022340101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Sep 26 04:47:09 2011] Fit fullrun_mos1_xmm0022340101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Sep 26 05:08:56 2011] Spatial fit model total counts = 2330.230000, observed total counts = 2320.000000
[Mon Sep 26 05:08:56 2011] Offset between fit and detection position for source 1 = 0.353258 pixels
[Mon Sep 26 05:08:56 2011] 2306.510000 total counts/ 1022.690000 bgd. counts: snr = 40.145062
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.353258 pixels
  Position = (279.9, 284.5) = 20 18 18.64 -70 51 30.7
  Extent = 12.1 (11.0-13.3)", rotation angle = 0
  Source counts = 1283.8 +/- 48.0
  Background counts = 1022.7
  Rate = 0.05 +/- 0.002
[Mon Sep 26 05:08:56 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 05:08:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 05:08:56 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 05:08:56 2011] Source does appear to be extended
[Mon Sep 26 05:08:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 05:08:56 2011] Source is confused with source 9
[Mon Sep 26 08:24:54 2011] Counts = 1283.820000, rescaling region sizes by 2.000000
[Mon Sep 26 08:24:54 2011] XMMSAS src. selection expression = ellipse(24298.745040, 24703.115400, 1455.384042, 1455.384042, 0.000000, X, Y)
[Mon Sep 26 08:24:54 2011] Writing source region out to fullrun_mos1_xmm0022340101_pi300-10000_pass1_cl_src1_src.reg
[Mon Sep 26 08:24:54 2011] Extracting stamp from image fullrun_mos1_xmm0022340101_pi300-10000_cl_sm2.00.img.gz, (196, 201) - (363, 368)
[Mon Sep 26 08:24:54 2011] XMMSAS bgd. selection expression = annulus(24298.745040, 24703.115400, 4851.280140, 9702.560279, X, Y) && !ellipse(32321.724160, 32565.252200, 417.620012, 417.620012, 0.000000, X, Y) && !ellipse(32445.602400, 31158.495800, 954.168027, 954.168027, 0.000000, X, Y) && !ellipse(30685.819122, 21123.026199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33809.615082, 28990.301483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28351.418800, 33547.453800, 353.635210, 353.635210, 0.000000, X, Y) && !ellipse(22622.583800, 25038.928400, 628.938418, 628.938418, 0.000000, X, Y) && !ellipse(22724.332000, 23111.160000, 1243.984036, 1243.984036, 0.000000, X, Y) && !ellipse(23630.729248, 25776.415070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24384.658600, 25317.222000, 1090.752031, 1090.752031, 0.000000, X, Y)
[Mon Sep 26 08:24:54 2011] Writing fullrun_mos1_xmm0022340101_pi300-10000_pass1_cl_src1.gif
[Mon Sep 26 08:24:59 2011] Mean detx,y = (426.23, -298.29) 
[Mon Sep 26 08:25:00 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Sep 26 08:27:42 2011] Binned source spectrum to 10 counts/bin
[Mon Sep 26 08:27:42 2011] Setting source spectrum file to fullrun_mos1_xmm0022340101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Sep 26 08:27:42 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0022340101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Sep 26 09:16:08 2011] Updating aperture counts using extracted products
[Mon Sep 26 09:16:08 2011] Error reading totcts from fullrun_mos1_xmm0022340101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Sep 26 09:16:08 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 09:16:08 2011] Using photon index=1.80, rate=0.0462, arf fullrun_mos1_xmm0022340101_pi300-10000_pass1_cl_src1.arf
[Mon Sep 26 09:16:08 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Sep 26 09:16:08 2011] Updating source flux to 4e-13
[Mon Sep 26 09:16:10 2011] Flag b found in src. 1 procflags, skipping spectral fitting
[Mon Sep 26 09:16:10 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon Sep 26 09:16:43 2011] Reading fit data from xmm0022340101/analysis//spectral/fullrun_mos1_xmm0022340101_pi300-10000_pass1_cl_src1_pl.csv
[Mon Sep 26 09:16:43 2011] Spectral fit parameter nH value = 1.24169e+22
[Mon Sep 26 09:16:43 2011] Spectral fit parameter PhoIndex value = 9.49989
[Mon Sep 26 09:16:43 2011] Failed to get F(0.3-8.0) from xmm0022340101/analysis//spectral/fullrun_mos1_xmm0022340101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Sep 26 09:16:43 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 09:16:43 2011] Using Nh = 1.2e+22, photon index=9.50, rate=0.0462, arf fullrun_mos1_xmm0022340101_pi300-10000_pass1_cl_src1.arf
[Mon Sep 26 09:16:43 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Sep 26 09:16:43 2011] Updating source flux to 2.3e-13