[Tue Jun 19 04:09:03 2012] Detection parameters:
  Position = (285.6, 279.7) = 16 48 39.97 -69 1 39.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8811.6 +/- 111.5
  Background counts = 30.3
  Rate = 0.4 +/- 0.005

[Tue Jun 19 04:09:04 2012] Off-axis axis estimate = 1.64'
[Tue Jun 19 04:11:13 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 04:11:13 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Tue Jun 19 04:11:13 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.065
[Tue Jun 19 04:11:13 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Tue Jun 19 05:10:25 2012] fullrun_pn_xmm0021750701_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 19 05:10:25 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0021750701_pi300-10000_cl_pass0_src1.csv
[Tue Jun 19 05:10:25 2012] fullrun_pn_xmm0021750701_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 19 05:10:25 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0021750701_pi300-10000_cl_pass0_src1.csv
[Tue Jun 19 05:10:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021750701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021750701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 05:10:25 2012] fullrun_pn_xmm0021750701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 19 05:10:25 2012] fullrun_pn_xmm0021750701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 19 05:10:25 2012] Fit fullrun_pn_xmm0021750701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 19 06:22:41 2012] Spatial fit model total counts = 8276.710000, observed total counts = 8292.000000
[Tue Jun 19 06:22:41 2012] Offset between fit and detection position for source 1 = 0.233828 pixels
[Tue Jun 19 06:22:41 2012] 8258.690000 total counts/ 1873.560000 bgd. counts: snr = 147.514918
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.233828 pixels
  Position = (285.5, 279.5) = 16 48 40.03 -69 1 39.7
  Extent = 6.0 (5.9-6.1)", rotation angle = 0
  Source counts = 6385.1 +/- 90.9
  Background counts = 1873.6
  Rate = 0.2 +/- 0.004
[Tue Jun 19 06:22:41 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 06:22:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 06:22:41 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 06:22:41 2012] Source does appear to be extended
[Tue Jun 19 06:22:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 06:23:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 19 06:23:01 2012] Initial guess for spatial extent in simple fitting = 6.04"
[Tue Jun 19 06:23:01 2012] source mask rpix=1.4, npix_max = 14, mask sum = 9, frac = 0.632
[Tue Jun 19 06:23:01 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.04"
[Tue Jun 19 07:09:03 2012] fullrun_pn_xmm0021750701_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 19 07:09:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021750701_pi300-10000_cl_pass1_src1.csv
[Tue Jun 19 07:09:03 2012] fullrun_pn_xmm0021750701_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 19 07:09:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021750701_pi300-10000_cl_pass1_src1.csv
[Tue Jun 19 07:09:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021750701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021750701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 07:09:03 2012] fullrun_pn_xmm0021750701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 19 07:09:03 2012] fullrun_pn_xmm0021750701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 19 07:09:03 2012] Fit fullrun_pn_xmm0021750701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun 19 08:16:56 2012] Spatial fit model total counts = 8327.750000, observed total counts = 8305.000000
[Tue Jun 19 08:16:56 2012] Offset between fit and detection position for source 1 = 0.012840 pixels
[Tue Jun 19 08:16:56 2012] 8333.030000 total counts/ 1894.090000 bgd. counts: snr = 147.949694
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.012840 pixels
  Position = (285.5, 279.5) = 16 48 40.03 -69 1 39.8
  Extent = 6.0 (5.9-6.2)", rotation angle = 0
  Source counts = 6438.9 +/- 91.3
  Background counts = 1894.1
  Rate = 0.3 +/- 0.004
[Tue Jun 19 08:16:56 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 08:16:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 08:16:56 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 08:16:56 2012] Source does appear to be extended
[Tue Jun 19 08:16:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 08:17:16 2012] Counts = 6438.940000, rescaling region sizes by 2.000000
[Tue Jun 19 08:17:16 2012] XMMSAS src. selection expression = ellipse(24792.925000, 24267.998600, 725.890821, 725.890821, 0.000000, X, Y)
[Tue Jun 19 08:17:16 2012] Writing source region out to fullrun_pn_xmm0021750701_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun 19 08:17:16 2012] Extracting stamp from image fullrun_pn_xmm0021750701_pi300-10000_cl_sm2.00.img.gz, (244, 238) - (327, 321)
[Tue Jun 19 08:17:16 2012] XMMSAS bgd. selection expression = annulus(24792.925000, 24267.998600, 2419.636070, 4839.272139, X, Y) && !ellipse(20309.190608, 26201.832200, 454.092013, 454.092013, 0.000000, X, Y) && !ellipse(25482.729004, 28825.317963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23211.478600, 26160.644000, 458.320013, 458.320013, 0.000000, X, Y) && !ellipse(23813.188400, 24202.745200, 363.324010, 363.324010, 0.000000, X, Y) && !ellipse(29175.395280, 27951.426600, 389.691211, 389.691211, 0.000000, X, Y) && !ellipse(28466.196045, 22026.346817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30169.662800, 28953.238400, 1338.128039, 1338.128039, 0.000000, X, Y) && !ellipse(24582.793549, 27719.333649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20287.270767, 25207.134308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28867.968353, 23150.020264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20758.553600, 22086.694800, 431.366471, 431.366471, 0.000000, X, Y) && !ellipse(21284.212000, 20004.093600, 1549.416045, 1549.416045, 0.000000, X, Y)
[Tue Jun 19 08:17:16 2012] Writing fullrun_pn_xmm0021750701_pi300-10000_pass1_cl_src1.gif
[Tue Jun 19 08:17:33 2012] Mean detx,y = (252.84, -32.78) 
[Tue Jun 19 08:17:37 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 19 08:18:30 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 19 08:18:31 2012] Setting source spectrum file to fullrun_pn_xmm0021750701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 19 08:18:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0021750701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun 19 10:17:30 2012] Updating aperture counts using extracted products
[Tue Jun 19 10:17:30 2012] Error reading totcts from fullrun_pn_xmm0021750701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 19 10:17:33 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 10:17:33 2012] Using photon index=1.80, rate=0.251, arf fullrun_pn_xmm0021750701_pi300-10000_pass1_cl_src1.arf
[Tue Jun 19 10:17:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 10:17:33 2012] Updating source flux to 8e-13
[Tue Jun 19 10:22:55 2012] Reading fit data from xmm0021750701/analysis//spectral/fullrun_pn_xmm0021750701_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jun 19 10:22:55 2012] Spectral fit parameter nH value = 4.57519e+21
[Tue Jun 19 10:22:55 2012] Spectral fit parameter PhoIndex value = 5.23458
[Tue Jun 19 10:22:55 2012] Failed to get F(0.3-8.0) from xmm0021750701/analysis//spectral/fullrun_pn_xmm0021750701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jun 19 10:22:55 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 10:22:55 2012] Using Nh = 4.6e+21, photon index=5.23, rate=0.251, arf fullrun_pn_xmm0021750701_pi300-10000_pass1_cl_src1.arf
[Tue Jun 19 10:22:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 10:22:55 2012] Updating source flux to 4.8e-13