[Tue Jun 19 04:09:50 2012] Detection parameters:
  Position = (220.4, 224.7) = 16 49 33.02 -69 5 37.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.8 +/- 12.8
  Background counts = 7.4
  Rate = 0.006 +/- 0.0007

[Tue Jun 19 04:09:50 2012] Off-axis axis estimate = 7.78'
[Tue Jun 19 05:45:01 2012] Using EEF radius (= 10.32 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 05:45:01 2012] Initial guess for spatial extent in simple fitting = 10.32"
[Tue Jun 19 05:45:01 2012] source mask rpix=2.4, npix_max = 33, mask sum = 27, frac = 0.818
[Tue Jun 19 05:45:01 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.32"
[Tue Jun 19 06:22:32 2012] fullrun_mos2_xmm0021750701_pi300-10000_cl_pass0_src9.ximg exists
[Tue Jun 19 06:22:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021750701_pi300-10000_cl_pass0_src9.csv
[Tue Jun 19 06:22:32 2012] fullrun_mos2_xmm0021750701_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue Jun 19 06:22:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021750701_pi300-10000_cl_pass0_src9.csv
[Tue Jun 19 06:22:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021750701_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021750701_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 06:22:32 2012] fullrun_mos2_xmm0021750701_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue Jun 19 06:22:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021750701_pi300-10000_cl_pass0_tfrozen_src9.csv
[Tue Jun 19 06:22:32 2012] fullrun_mos2_xmm0021750701_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Jun 19 06:22:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021750701_pi300-10000_cl_pass0_tfrozen_src9.csv
[Tue Jun 19 06:22:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021750701_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021750701_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 06:22:51 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 13.781756 pixels away
[Tue Jun 19 06:22:51 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 06:22:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 06:22:51 2012] Assessing source extent using major
[Tue Jun 19 06:22:51 2012] Source does appear to be extended
[Tue Jun 19 06:22:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 07:41:52 2012] Using EEF radius (= 10.32 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 07:41:52 2012] Initial guess for spatial extent in simple fitting = 10.32"
[Tue Jun 19 07:41:52 2012] source mask rpix=2.4, npix_max = 33, mask sum = 27, frac = 0.818
[Tue Jun 19 07:41:52 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 10.32"
[Tue Jun 19 08:16:47 2012] fullrun_mos2_xmm0021750701_pi300-10000_cl_pass1_src9.ximg exists
[Tue Jun 19 08:16:47 2012] fullrun_mos2_xmm0021750701_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Jun 19 08:16:47 2012] Fit fullrun_mos2_xmm0021750701_pi300-10000_cl_pass1_src9 appears to have run properly
[Tue Jun 19 08:16:47 2012] fullrun_mos2_xmm0021750701_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Jun 19 08:16:47 2012] fullrun_mos2_xmm0021750701_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Jun 19 08:16:47 2012] Fit fullrun_mos2_xmm0021750701_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Tue Jun 19 08:17:05 2012] Spatial fit model total counts = 155.430000, observed total counts = 149.000000
[Tue Jun 19 08:17:05 2012] Offset between fit and detection position for source 10 = 0.140395 pixels
[Tue Jun 19 08:17:05 2012] 154.138500 total counts/ 78.110700 bgd. counts: snr = 8.602351
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.140395 pixels
  Position = (220.5, 224.7) = 16 49 32.93 -69 5 37.6
  Extent = 5.4 (4.0-6.7)", rotation angle = 0
  Source counts = 76.0 +/- 12.4
  Background counts = 78.1
  Rate = 0.003 +/- 0.0004
[Tue Jun 19 08:17:05 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 08:17:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 08:17:05 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 08:17:05 2012] Source does appear to be extended
[Tue Jun 19 08:17:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 09:37:24 2012] XMMSAS src. selection expression = ellipse(19134.211800, 19496.680800, 324.111609, 324.111609, 0.000000, X, Y)
[Tue Jun 19 09:37:24 2012] Writing source region out to fullrun_mos2_xmm0021750701_pi300-10000_pass1_cl_src10_src.reg
[Tue Jun 19 09:37:24 2012] Extracting stamp from image fullrun_mos2_xmm0021750701_pi300-10000_cl_sm2.00.img.gz, (202, 206) - (239, 243)
[Tue Jun 19 09:37:24 2012] XMMSAS bgd. selection expression = annulus(19134.211800, 19496.680800, 540.186016, 1080.372031, X, Y)
[Tue Jun 19 09:37:24 2012] Writing fullrun_mos2_xmm0021750701_pi300-10000_pass1_cl_src10.gif
[Tue Jun 19 09:39:21 2012] Mean detx,y = (-6236.78, 4039.92) 
[Tue Jun 19 09:39:22 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 19 09:39:33 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 19 09:39:33 2012] Setting source spectrum file to fullrun_mos2_xmm0021750701_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Jun 19 09:39:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0021750701_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Jun 19 10:09:19 2012] Not generating rmf since there are only 76 counts
[Tue Jun 19 10:09:19 2012] rmf not generated due to insufficient counts
[Tue Jun 19 10:17:38 2012] Updating aperture counts using extracted products
[Tue Jun 19 10:17:38 2012] Error reading totcts from fullrun_mos2_xmm0021750701_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Jun 19 10:17:39 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 10:17:39 2012] Using photon index=1.80, rate=0.00269, arf fullrun_mos2_xmm0021750701_pi300-10000_pass1_cl_src10.arf
[Tue Jun 19 10:17:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 10:17:39 2012] Updating source flux to 5.7e-14
[Tue Jun 19 10:18:40 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting