[Tue Jun 19 04:09:49 2012] Detection parameters:
  Position = (285.4, 279.8) = 16 48 40.12 -69 1 38.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2959.6 +/- 64.5
  Background counts = 10.5
  Rate = 0.1 +/- 0.002

[Tue Jun 19 04:09:50 2012] Off-axis axis estimate = 1.65'
[Tue Jun 19 05:45:01 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 05:45:01 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Tue Jun 19 05:45:01 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.065
[Tue Jun 19 05:45:01 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Tue Jun 19 06:22:32 2012] fullrun_mos2_xmm0021750701_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 19 06:22:32 2012] fullrun_mos2_xmm0021750701_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 19 06:22:32 2012] Fit fullrun_mos2_xmm0021750701_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue Jun 19 06:22:32 2012] fullrun_mos2_xmm0021750701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 19 06:22:32 2012] fullrun_mos2_xmm0021750701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 19 06:22:32 2012] Fit fullrun_mos2_xmm0021750701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 19 06:22:51 2012] Spatial fit model total counts = 2752.160000, observed total counts = 2705.000000
[Tue Jun 19 06:22:51 2012] Offset between fit and detection position for source 1 = 0.172011 pixels
[Tue Jun 19 06:22:51 2012] 2750.675000 total counts/ 591.755000 bgd. counts: snr = 88.749432
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.172011 pixels
  Position = (285.4, 279.6) = 16 48 40.10 -69 1 39.2
  Extent = 6.2" x 5.5", rotation angle = 345
  Source counts = 2158.9 +/- 52.4
  Background counts = 591.8
  Rate = 0.08 +/- 0.002
[Tue Jun 19 06:22:51 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 06:22:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 06:22:51 2012] Assessing source extent using major
[Tue Jun 19 06:22:51 2012] Source does appear to be extended
[Tue Jun 19 06:22:51 2012] Computing asymmetry using major and minor axis, asym = 1.13
[Tue Jun 19 07:41:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 19 07:41:52 2012] Initial guess for spatial extent in simple fitting = 5.80"
[Tue Jun 19 07:41:52 2012] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.669
[Tue Jun 19 07:41:52 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.80"
[Tue Jun 19 08:16:47 2012] fullrun_mos2_xmm0021750701_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 19 08:16:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021750701_pi300-10000_cl_pass1_src1.csv
[Tue Jun 19 08:16:47 2012] fullrun_mos2_xmm0021750701_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 19 08:16:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021750701_pi300-10000_cl_pass1_src1.csv
[Tue Jun 19 08:16:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021750701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021750701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 08:16:47 2012] fullrun_mos2_xmm0021750701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 19 08:16:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021750701_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jun 19 08:16:47 2012] fullrun_mos2_xmm0021750701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 19 08:16:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021750701_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jun 19 08:16:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021750701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021750701_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 08:17:05 2012] Warning, spatial fit 1 centroid is now closest to src. 13
[Tue Jun 19 08:17:05 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 08:17:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 08:17:05 2012] Assessing source extent using major
[Tue Jun 19 08:17:05 2012] Source does appear to be extended
[Tue Jun 19 08:17:05 2012] Computing asymmetry using major and minor axis, asym = 1.13
[Tue Jun 19 09:37:24 2012] Counts = 2158.920000, rescaling region sizes by 2.000000
[Tue Jun 19 09:37:24 2012] XMMSAS src. selection expression = ellipse(24785.417400, 24279.969400, 738.406821, 654.316819, 344.970186, X, Y)
[Tue Jun 19 09:37:24 2012] Writing source region out to fullrun_mos2_xmm0021750701_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun 19 09:37:24 2012] Extracting stamp from image fullrun_mos2_xmm0021750701_pi300-10000_cl_sm2.00.img.gz, (243, 237) - (328, 322)
[Tue Jun 19 09:37:24 2012] XMMSAS bgd. selection expression = annulus(24785.417400, 24279.969400, 2461.356071, 4922.712142, X, Y) && !ellipse(20307.346520, 26209.477320, 391.368811, 391.368811, 0.000000, X, Y) && !ellipse(23193.991080, 26188.165000, 408.840012, 408.840012, 0.000000, X, Y) && !ellipse(25434.600360, 28823.331600, 409.308012, 409.308012, 0.000000, X, Y) && !ellipse(23832.822113, 24159.297791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24898.043762, 20125.698959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28466.412800, 21919.063000, 468.360013, 468.360013, 0.000000, X, Y) && !ellipse(29184.027980, 27963.076200, 261.065677, 261.065677, 0.000000, X, Y) && !ellipse(27891.617920, 22887.651600, 699.280020, 699.280020, 0.000000, X, Y)
[Tue Jun 19 09:37:24 2012] Writing fullrun_mos2_xmm0021750701_pi300-10000_pass1_cl_src1.gif
[Tue Jun 19 09:37:27 2012] Mean detx,y = (-100.00, -121.34) 
[Tue Jun 19 09:37:28 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 19 09:37:43 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 19 09:37:43 2012] Setting source spectrum file to fullrun_mos2_xmm0021750701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 19 09:37:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0021750701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun 19 10:17:37 2012] Updating aperture counts using extracted products
[Tue Jun 19 10:17:37 2012] Error reading totcts from fullrun_mos2_xmm0021750701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 19 10:17:39 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 10:17:39 2012] Using photon index=1.80, rate=0.0763, arf fullrun_mos2_xmm0021750701_pi300-10000_pass1_cl_src1.arf
[Tue Jun 19 10:17:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 10:17:39 2012] Updating source flux to 9.9e-13
[Tue Jun 19 10:20:19 2012] Reading fit data from xmm0021750701/analysis//spectral/fullrun_mos2_xmm0021750701_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jun 19 10:20:19 2012] Spectral fit parameter nH value = 3.53059e+21
[Tue Jun 19 10:20:19 2012] Spectral fit parameter PhoIndex value = 4.39794
[Tue Jun 19 10:20:19 2012] Failed to get F(0.3-8.0) from xmm0021750701/analysis//spectral/fullrun_mos2_xmm0021750701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jun 19 10:20:19 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 10:20:19 2012] Using Nh = 3.5e+21, photon index=4.40, rate=0.0763, arf fullrun_mos2_xmm0021750701_pi300-10000_pass1_cl_src1.arf
[Tue Jun 19 10:20:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 10:20:19 2012] Updating source flux to 6.4e-13