[Tue Jun 19 04:09:26 2012] Detection parameters:
  Position = (326.5, 252.1) = 16 48 6.79 -69 3 40.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.9 +/- 10.5
  Background counts = 8.0
  Rate = 0.003 +/- 0.0004

[Tue Jun 19 04:09:26 2012] Off-axis axis estimate = 3.93'
[Tue Jun 19 05:10:26 2012] Using EEF radius (= 8.39 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 05:10:26 2012] Initial guess for spatial extent in simple fitting = 8.39"
[Tue Jun 19 05:10:26 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.059
[Tue Jun 19 05:10:26 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 8.39"
[Tue Jun 19 05:45:00 2012] fullrun_mos1_xmm0021750701_pi300-10000_cl_pass0_src15.ximg exists
[Tue Jun 19 05:45:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021750701_pi300-10000_cl_pass0_src15.csv
[Tue Jun 19 05:45:00 2012] fullrun_mos1_xmm0021750701_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Jun 19 05:45:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021750701_pi300-10000_cl_pass0_src15.csv
[Tue Jun 19 05:45:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021750701_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021750701_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 05:45:00 2012] fullrun_mos1_xmm0021750701_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Jun 19 05:45:00 2012] fullrun_mos1_xmm0021750701_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Jun 19 05:45:00 2012] Fit fullrun_mos1_xmm0021750701_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Tue Jun 19 06:22:46 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 11.232016 pixels away
[Tue Jun 19 06:22:46 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 06:22:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 06:22:46 2012] Assessing source extent using major
[Tue Jun 19 06:22:46 2012] Source does appear to be extended
[Tue Jun 19 06:22:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 07:09:04 2012] Using EEF radius (= 8.39 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 07:09:04 2012] Initial guess for spatial extent in simple fitting = 8.39"
[Tue Jun 19 07:09:04 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.059
[Tue Jun 19 07:09:04 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 8.39"
[Tue Jun 19 07:41:51 2012] fullrun_mos1_xmm0021750701_pi300-10000_cl_pass1_src15.ximg exists
[Tue Jun 19 07:41:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021750701_pi300-10000_cl_pass1_src15.csv
[Tue Jun 19 07:41:51 2012] fullrun_mos1_xmm0021750701_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue Jun 19 07:41:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021750701_pi300-10000_cl_pass1_src15.csv
[Tue Jun 19 07:41:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021750701_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021750701_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 07:41:52 2012] fullrun_mos1_xmm0021750701_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue Jun 19 07:41:52 2012] fullrun_mos1_xmm0021750701_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Jun 19 07:41:52 2012] Fit fullrun_mos1_xmm0021750701_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Tue Jun 19 08:17:01 2012] Spatial fit model total counts = 145.998000, observed total counts = 146.000000
[Tue Jun 19 08:17:01 2012] Offset between fit and detection position for source 25 = 0.477605 pixels
[Tue Jun 19 08:17:01 2012] 145.629600 total counts/ 99.329500 bgd. counts: snr = 4.645611
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.477605 pixels
  Position = (327.0, 252.2) = 16 48 6.42 -69 3 38.4
  Extent = 6.5 (4.3-8.9)", rotation angle = 0
  Source counts = 46.3 +/- 12.1
  Background counts = 99.3
  Rate = 0.002 +/- 0.0004
[Tue Jun 19 08:17:01 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 08:17:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 08:17:01 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 08:17:01 2012] Source does appear to be extended
[Tue Jun 19 08:17:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 09:13:41 2012] XMMSAS src. selection expression = ellipse(28398.941000, 21893.524000, 390.117611, 390.117611, 0.000000, X, Y)
[Tue Jun 19 09:13:41 2012] Writing source region out to fullrun_mos1_xmm0021750701_pi300-10000_pass1_cl_src25_src.reg
[Tue Jun 19 09:13:41 2012] Extracting stamp from image fullrun_mos1_xmm0021750701_pi300-10000_cl_sm2.00.img.gz, (305, 230) - (349, 275)
[Tue Jun 19 09:13:41 2012] XMMSAS bgd. selection expression = annulus(28398.941000, 21893.524000, 650.196019, 1300.392037, X, Y)
[Tue Jun 19 09:13:41 2012] Writing fullrun_mos1_xmm0021750701_pi300-10000_pass1_cl_src25.gif
[Tue Jun 19 09:16:50 2012] Mean detx,y = (2860.84, -3396.66) 
[Tue Jun 19 09:16:51 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 19 09:16:58 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 19 09:16:58 2012] Setting source spectrum file to fullrun_mos1_xmm0021750701_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Jun 19 09:16:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0021750701_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Tue Jun 19 09:36:17 2012] Not generating rmf since there are only 46 counts
[Tue Jun 19 09:36:17 2012] rmf not generated due to insufficient counts
[Tue Jun 19 10:17:35 2012] Updating aperture counts using extracted products
[Tue Jun 19 10:17:35 2012] Error reading totcts from fullrun_mos1_xmm0021750701_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Jun 19 10:17:35 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 10:17:35 2012] Using photon index=1.80, rate=0.00164, arf fullrun_mos1_xmm0021750701_pi300-10000_pass1_cl_src25.arf
[Tue Jun 19 10:17:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 10:17:35 2012] Updating source flux to 2.5e-14
[Tue Jun 19 10:17:42 2012] Source 25 has fewer than 100.000000 counts, skipping spectral fitting