[Tue Jun 19 04:09:26 2012] Detection parameters:
  Position = (146.6, 171.1) = 16 50 33.37 -69 9 27.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.8 +/- 10.5
  Background counts = 5.9
  Rate = 0.002 +/- 0.0004

[Tue Jun 19 04:09:26 2012] Off-axis axis estimate = 14.37'
[Tue Jun 19 05:10:26 2012] Using EEF radius (= 13.61 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 05:10:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 19 05:10:26 2012] Initial guess for spatial extent in simple fitting = 13.61"
[Tue Jun 19 05:10:26 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.063
[Tue Jun 19 05:10:26 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 13.61"
[Tue Jun 19 05:45:00 2012] fullrun_mos1_xmm0021750701_pi300-10000_cl_pass0_src19.ximg exists
[Tue Jun 19 05:45:00 2012] fullrun_mos1_xmm0021750701_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Jun 19 05:45:00 2012] Fit fullrun_mos1_xmm0021750701_pi300-10000_cl_pass0_src19 appears to have run properly
[Tue Jun 19 05:45:00 2012] fullrun_mos1_xmm0021750701_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Jun 19 05:45:00 2012] fullrun_mos1_xmm0021750701_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Jun 19 05:45:00 2012] Fit fullrun_mos1_xmm0021750701_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Tue Jun 19 06:22:46 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 15.564420 pixels away
[Tue Jun 19 06:22:46 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 06:22:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 06:22:46 2012] Assessing source extent using major
[Tue Jun 19 06:22:46 2012] Source does appear to be extended
[Tue Jun 19 06:22:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 07:09:04 2012] Using EEF radius (= 13.61 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 07:09:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 19 07:09:04 2012] Initial guess for spatial extent in simple fitting = 13.61"
[Tue Jun 19 07:09:04 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.063
[Tue Jun 19 07:09:04 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 13.61"
[Tue Jun 19 07:41:51 2012] fullrun_mos1_xmm0021750701_pi300-10000_cl_pass1_src18.ximg exists
[Tue Jun 19 07:41:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021750701_pi300-10000_cl_pass1_src18.csv
[Tue Jun 19 07:41:51 2012] fullrun_mos1_xmm0021750701_pi300-10000_cl_pass1_src18_1.ximg exists
[Tue Jun 19 07:41:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021750701_pi300-10000_cl_pass1_src18.csv
[Tue Jun 19 07:41:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021750701_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021750701_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 07:41:52 2012] fullrun_mos1_xmm0021750701_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Tue Jun 19 07:41:52 2012] fullrun_mos1_xmm0021750701_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Tue Jun 19 07:41:52 2012] Fit fullrun_mos1_xmm0021750701_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Tue Jun 19 08:17:01 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 17.475835 pixels away
[Tue Jun 19 08:17:01 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 08:17:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 08:17:01 2012] Assessing source extent using major
[Tue Jun 19 08:17:01 2012] Source does appear to be extended
[Tue Jun 19 08:17:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 09:13:41 2012] XMMSAS src. selection expression = ellipse(12702.246338, 14838.528046, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 19 09:13:41 2012] Writing source region out to fullrun_mos1_xmm0021750701_pi300-10000_pass1_cl_src12_src.reg
[Tue Jun 19 09:13:41 2012] Extracting stamp from image fullrun_mos1_xmm0021750701_pi300-10000_cl_sm2.00.img.gz, (109, 134) - (184, 209)
[Tue Jun 19 09:13:41 2012] XMMSAS bgd. selection expression = annulus(12702.246338, 14838.528046, 1087.500000, 2175.000000, X, Y)
[Tue Jun 19 09:13:41 2012] Writing fullrun_mos1_xmm0021750701_pi300-10000_pass1_cl_src12.gif
[Tue Jun 19 09:17:25 2012] Mean detx,y = (8115.03, 12987.61) 
[Tue Jun 19 09:17:26 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 19 09:17:38 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 19 09:17:38 2012] Setting source spectrum file to fullrun_mos1_xmm0021750701_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue Jun 19 09:17:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0021750701_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Tue Jun 19 09:36:29 2012] Not generating rmf since there are only 61 counts
[Tue Jun 19 09:36:29 2012] rmf not generated due to insufficient counts
[Tue Jun 19 10:17:35 2012] Updating aperture counts using extracted products
[Tue Jun 19 10:17:35 2012] Error reading totcts from fullrun_mos1_xmm0021750701_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue Jun 19 10:17:36 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 10:17:36 2012] Using photon index=1.80, rate=0.00218, arf fullrun_mos1_xmm0021750701_pi300-10000_pass1_cl_src12.arf
[Tue Jun 19 10:17:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 10:17:36 2012] Updating source flux to 5.6e-14
[Tue Jun 19 10:17:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting