[Sat Jul 21 08:30:15 2012] Detection parameters:
  Position = (390.3, 238.8) = 16 47 15.29 -69 4 35.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.3 +/- 12.2
  Background counts = 23.0
  Rate = 0.003 +/- 0.0005

[Sat Jul 21 08:30:15 2012] Off-axis axis estimate = 7.94'
[Sat Jul 21 08:32:23 2012] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 08:32:23 2012] Initial guess for spatial extent in simple fitting = 10.40"
[Sat Jul 21 08:32:23 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.077
[Sat Jul 21 08:32:23 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 10.40"
[Sat Jul 21 09:18:28 2012] fullrun_pn_xmm0021750501_pi300-10000_cl_pass0_src33.ximg exists
[Sat Jul 21 09:18:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021750501_pi300-10000_cl_pass0_src33.csv
[Sat Jul 21 09:18:28 2012] fullrun_pn_xmm0021750501_pi300-10000_cl_pass0_src33_1.ximg exists
[Sat Jul 21 09:18:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021750501_pi300-10000_cl_pass0_src33.csv
[Sat Jul 21 09:18:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021750501_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021750501_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 09:18:29 2012] fullrun_pn_xmm0021750501_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sat Jul 21 09:18:29 2012] fullrun_pn_xmm0021750501_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sat Jul 21 09:18:29 2012] Fit fullrun_pn_xmm0021750501_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Sat Jul 21 10:46:30 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 13.870496 pixels away
[Sat Jul 21 10:46:30 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 10:46:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 10:46:30 2012] Assessing source extent using major
[Sat Jul 21 10:46:30 2012] Source does appear to be extended
[Sat Jul 21 10:46:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 10:47:04 2012] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 10:47:04 2012] Initial guess for spatial extent in simple fitting = 10.40"
[Sat Jul 21 10:47:04 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.077
[Sat Jul 21 10:47:04 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 10.40"
[Sat Jul 21 11:45:20 2012] fullrun_pn_xmm0021750501_pi300-10000_cl_pass1_src29.ximg exists
[Sat Jul 21 11:45:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021750501_pi300-10000_cl_pass1_src29.csv
[Sat Jul 21 11:45:20 2012] fullrun_pn_xmm0021750501_pi300-10000_cl_pass1_src29_1.ximg exists
[Sat Jul 21 11:45:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021750501_pi300-10000_cl_pass1_src29.csv
[Sat Jul 21 11:45:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021750501_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021750501_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 11:45:20 2012] fullrun_pn_xmm0021750501_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sat Jul 21 11:45:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021750501_pi300-10000_cl_pass1_tfrozen_src29.csv
[Sat Jul 21 11:45:20 2012] fullrun_pn_xmm0021750501_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sat Jul 21 11:45:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021750501_pi300-10000_cl_pass1_tfrozen_src29.csv
[Sat Jul 21 11:45:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021750501_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021750501_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 13:19:35 2012] Spatial fit model total counts = 278.225000, observed total counts = 236.000000
[Sat Jul 21 13:19:35 2012] Poor agreement between spatial fit and data for source 36
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul 21 13:19:35 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 13:19:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 13:19:35 2012] Assessing source extent using major
[Sat Jul 21 13:19:35 2012] Source does appear to be extended
[Sat Jul 21 13:19:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 13:19:57 2012] XMMSAS src. selection expression = ellipse(33909.189301, 20726.675461, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 21 13:19:57 2012] Writing source region out to fullrun_pn_xmm0021750501_pi300-10000_pass1_cl_src36_src.reg
[Sat Jul 21 13:19:57 2012] Extracting stamp from image fullrun_pn_xmm0021750501_pi300-10000_cl_sm2.00.img.gz, (353, 201) - (428, 276)
[Sat Jul 21 13:19:57 2012] XMMSAS bgd. selection expression = annulus(33909.189301, 20726.675461, 1087.500000, 2175.000000, X, Y) && !ellipse(36827.576263, 21124.576736, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 21 13:19:57 2012] Writing fullrun_pn_xmm0021750501_pi300-10000_pass1_cl_src36.gif
[Sat Jul 21 13:46:37 2012] Mean detx,y = (-8449.32, -4600.02) 
[Sat Jul 21 13:46:40 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 13:47:02 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 13:47:03 2012] Setting source spectrum file to fullrun_pn_xmm0021750501_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sat Jul 21 13:47:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0021750501_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Sat Jul 21 14:20:53 2012] Not generating rmf since there are only 73 counts
[Sat Jul 21 14:20:53 2012] rmf not generated due to insufficient counts
[Sat Jul 21 15:18:19 2012] Updating aperture counts using extracted products
[Sat Jul 21 15:18:19 2012] Error reading totcts from fullrun_pn_xmm0021750501_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sat Jul 21 15:18:21 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 15:18:21 2012] Using photon index=1.80, rate=0.00297, arf fullrun_pn_xmm0021750501_pi300-10000_pass1_cl_src36.arf
[Sat Jul 21 15:18:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 15:18:21 2012] Updating source flux to 1.9e-14
[Sat Jul 21 15:19:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting