[Sat Jul 21 08:30:15 2012] Detection parameters:
  Position = (368.5, 315.5) = 16 47 33.28 -68 58 59.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.3 +/- 10.8
  Background counts = 24.2
  Rate = 0.005 +/- 0.0008

[Sat Jul 21 08:30:15 2012] Off-axis axis estimate = 5.23'
[Sat Jul 21 08:32:23 2012] Using EEF radius (= 9.04 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 08:32:23 2012] Initial guess for spatial extent in simple fitting = 9.04"
[Sat Jul 21 08:32:23 2012] source mask rpix=2.1, npix_max = 26, mask sum = 21, frac = 0.790
[Sat Jul 21 08:32:23 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 9.04"
[Sat Jul 21 09:18:28 2012] fullrun_pn_xmm0021750501_pi300-10000_cl_pass0_src27.ximg exists
[Sat Jul 21 09:18:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021750501_pi300-10000_cl_pass0_src27.csv
[Sat Jul 21 09:18:28 2012] fullrun_pn_xmm0021750501_pi300-10000_cl_pass0_src27_1.ximg exists
[Sat Jul 21 09:18:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021750501_pi300-10000_cl_pass0_src27.csv
[Sat Jul 21 09:18:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021750501_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021750501_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 09:18:29 2012] fullrun_pn_xmm0021750501_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sat Jul 21 09:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021750501_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sat Jul 21 09:18:29 2012] fullrun_pn_xmm0021750501_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sat Jul 21 09:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021750501_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sat Jul 21 09:18:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021750501_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021750501_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 10:46:30 2012] Warning, spatial fit 27 centroid is now closest to src. 31
[Sat Jul 21 10:46:30 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 10:46:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 10:46:30 2012] Assessing source extent using major
[Sat Jul 21 10:46:30 2012] Source does appear to be extended
[Sat Jul 21 10:46:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 10:47:04 2012] Using EEF radius (= 9.04 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 10:47:04 2012] Initial guess for spatial extent in simple fitting = 9.04"
[Sat Jul 21 10:47:04 2012] source mask rpix=2.1, npix_max = 26, mask sum = 21, frac = 0.790
[Sat Jul 21 10:47:04 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 9.04"
[Sat Jul 21 11:45:20 2012] fullrun_pn_xmm0021750501_pi300-10000_cl_pass1_src25.ximg exists
[Sat Jul 21 11:45:20 2012] fullrun_pn_xmm0021750501_pi300-10000_cl_pass1_src25_1.ximg exists
[Sat Jul 21 11:45:20 2012] Fit fullrun_pn_xmm0021750501_pi300-10000_cl_pass1_src25 appears to have run properly
[Sat Jul 21 11:45:20 2012] fullrun_pn_xmm0021750501_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sat Jul 21 11:45:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021750501_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sat Jul 21 11:45:20 2012] fullrun_pn_xmm0021750501_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sat Jul 21 11:45:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021750501_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sat Jul 21 11:45:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021750501_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021750501_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 13:19:35 2012] Source 30 is offset by -1.129924 and -7.906451 pixels which is larger than
2 X fitted extent = 7.453471 x 7.453471, not incorporating fit results
[Sat Jul 21 13:19:35 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 13:19:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 13:19:35 2012] Assessing source extent using major
[Sat Jul 21 13:19:35 2012] Source does appear to be extended
[Sat Jul 21 13:19:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 13:19:57 2012] XMMSAS src. selection expression = ellipse(32008.249390, 27404.088745, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 21 13:19:57 2012] Writing source region out to fullrun_pn_xmm0021750501_pi300-10000_pass1_cl_src30_src.reg
[Sat Jul 21 13:19:57 2012] Extracting stamp from image fullrun_pn_xmm0021750501_pi300-10000_cl_sm2.00.img.gz, (331, 278) - (406, 353)
[Sat Jul 21 13:19:57 2012] XMMSAS bgd. selection expression = annulus(32008.249390, 27404.088745, 1087.500000, 2175.000000, X, Y) && !ellipse(30277.334600, 28672.120200, 405.369612, 405.369612, 0.000000, X, Y) && !ellipse(29226.431824, 27941.527740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30229.023800, 28815.002000, 1025.632030, 1025.632030, 0.000000, X, Y) && !ellipse(31251.673800, 26780.060400, 340.799210, 340.799210, 0.000000, X, Y) && !ellipse(31718.551178, 24361.725189, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 21 13:19:57 2012] Writing fullrun_pn_xmm0021750501_pi300-10000_pass1_cl_src30.gif
[Sat Jul 21 13:42:46 2012] Mean detx,y = (-7191.91, 2246.32) 
[Sat Jul 21 13:42:50 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 13:43:13 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 13:43:14 2012] Setting source spectrum file to fullrun_pn_xmm0021750501_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat Jul 21 13:43:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0021750501_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sat Jul 21 14:19:45 2012] Not generating rmf since there are only 64 counts
[Sat Jul 21 14:19:45 2012] rmf not generated due to insufficient counts
[Sat Jul 21 15:18:18 2012] Updating aperture counts using extracted products
[Sat Jul 21 15:18:18 2012] Error reading totcts from fullrun_pn_xmm0021750501_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat Jul 21 15:18:20 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 15:18:20 2012] Using photon index=1.80, rate=0.00485, arf fullrun_pn_xmm0021750501_pi300-10000_pass1_cl_src30.arf
[Sat Jul 21 15:18:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 15:18:20 2012] Updating source flux to 2.9e-14
[Sat Jul 21 15:19:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting