[Sat Jul 21 08:30:30 2012] Detection parameters:
  Position = (146.8, 170.3) = 16 50 33.52 -69 9 29.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.5 +/- 12.7
  Background counts = 6.9
  Rate = 0.003 +/- 0.0005

[Sat Jul 21 08:30:30 2012] Off-axis axis estimate = 14.39'
[Sat Jul 21 09:18:29 2012] Using EEF radius (= 13.62 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 09:18:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 21 09:18:29 2012] Initial guess for spatial extent in simple fitting = 13.62"
[Sat Jul 21 09:18:29 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.929
[Sat Jul 21 09:18:29 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 13.62"
[Sat Jul 21 09:53:22 2012] fullrun_mos1_xmm0021750501_pi300-10000_cl_pass0_src11.ximg exists
[Sat Jul 21 09:53:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021750501_pi300-10000_cl_pass0_src11.csv
[Sat Jul 21 09:53:22 2012] fullrun_mos1_xmm0021750501_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Jul 21 09:53:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021750501_pi300-10000_cl_pass0_src11.csv
[Sat Jul 21 09:53:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021750501_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021750501_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 09:53:23 2012] fullrun_mos1_xmm0021750501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Jul 21 09:53:23 2012] fullrun_mos1_xmm0021750501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Jul 21 09:53:23 2012] Fit fullrun_mos1_xmm0021750501_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Jul 21 10:46:38 2012] Spatial fit model total counts = 176.991000, observed total counts = 177.000000
[Sat Jul 21 10:46:38 2012] Offset between fit and detection position for source 9 = 0.391032 pixels
[Sat Jul 21 10:46:38 2012] 176.008100 total counts/ 112.003000 bgd. counts: snr = 6.047832
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.391032 pixels
  Position = (146.8, 170.7) = 16 50 33.54 -69 9 28.7
  Extent = 6.6 (5.4-8.5)", rotation angle = 0
  Source counts = 64.0 +/- 13.3
  Background counts = 112.0
  Rate = 0.002 +/- 0.0005
[Sat Jul 21 10:46:38 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 10:46:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 10:46:38 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 10:46:38 2012] Source does appear to be extended
[Sat Jul 21 10:46:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 11:45:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 21 11:45:20 2012] Initial guess for spatial extent in simple fitting = 6.60"
[Sat Jul 21 11:45:20 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.984
[Sat Jul 21 11:45:20 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 6.60"
[Sat Jul 21 12:28:20 2012] fullrun_mos1_xmm0021750501_pi300-10000_cl_pass1_src11.ximg exists
[Sat Jul 21 12:28:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021750501_pi300-10000_cl_pass1_src11.csv
[Sat Jul 21 12:28:20 2012] fullrun_mos1_xmm0021750501_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Jul 21 12:28:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021750501_pi300-10000_cl_pass1_src11.csv
[Sat Jul 21 12:28:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021750501_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021750501_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 12:28:21 2012] fullrun_mos1_xmm0021750501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Jul 21 12:28:21 2012] fullrun_mos1_xmm0021750501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Jul 21 12:28:21 2012] Fit fullrun_mos1_xmm0021750501_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Jul 21 13:19:41 2012] Spatial fit model total counts = 149.000000, observed total counts = 149.000000
[Sat Jul 21 13:19:41 2012] Offset between fit and detection position for source 9 = 0.004654 pixels
[Sat Jul 21 13:19:41 2012] 148.428900 total counts/ 86.781300 bgd. counts: snr = 6.617639
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.004654 pixels
  Position = (146.8, 170.7) = 16 50 33.54 -69 9 28.7
  Extent = 6.4 (5.2-8.3)", rotation angle = 0
  Source counts = 61.6 +/- 12.2
  Background counts = 86.8
  Rate = 0.002 +/- 0.0004
[Sat Jul 21 13:19:41 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 13:19:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 13:19:41 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 13:19:41 2012] Source does appear to be extended
[Sat Jul 21 13:19:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 14:22:02 2012] XMMSAS src. selection expression = ellipse(12719.146200, 14804.509800, 384.183011, 384.183011, 0.000000, X, Y)
[Sat Jul 21 14:22:02 2012] Writing source region out to fullrun_mos1_xmm0021750501_pi300-10000_pass1_cl_src9_src.reg
[Sat Jul 21 14:22:02 2012] Extracting stamp from image fullrun_mos1_xmm0021750501_pi300-10000_cl_sm2.00.img.gz, (125, 149) - (169, 193)
[Sat Jul 21 14:22:02 2012] XMMSAS bgd. selection expression = annulus(12719.146200, 14804.509800, 640.305018, 1280.610037, X, Y)
[Sat Jul 21 14:22:02 2012] Writing fullrun_mos1_xmm0021750501_pi300-10000_pass1_cl_src9.gif
[Sat Jul 21 14:25:18 2012] Mean detx,y = (8183.93, 12974.77) 
[Sat Jul 21 14:25:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 14:25:29 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 14:25:30 2012] Setting source spectrum file to fullrun_mos1_xmm0021750501_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Jul 21 14:25:30 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0021750501_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat Jul 21 14:45:15 2012] Not generating rmf since there are only 61 counts
[Sat Jul 21 14:45:15 2012] rmf not generated due to insufficient counts
[Sat Jul 21 15:18:21 2012] Updating aperture counts using extracted products
[Sat Jul 21 15:18:21 2012] Error reading totcts from fullrun_mos1_xmm0021750501_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Jul 21 15:18:23 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 15:18:23 2012] Using photon index=1.80, rate=0.0022, arf fullrun_mos1_xmm0021750501_pi300-10000_pass1_cl_src9.arf
[Sat Jul 21 15:18:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 15:18:23 2012] Updating source flux to 6.6e-14
[Sat Jul 21 15:18:28 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting