[Sat Jul 21 08:30:30 2012] Detection parameters:
  Position = (285.7, 279.1) = 16 48 40.19 -69 1 38.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3475.3 +/- 70.9
  Background counts = 10.6
  Rate = 0.1 +/- 0.003

[Sat Jul 21 08:30:30 2012] Off-axis axis estimate = 1.68'
[Sat Jul 21 09:18:29 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 09:18:29 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Sat Jul 21 09:18:29 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Sat Jul 21 09:18:29 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Sat Jul 21 09:53:22 2012] fullrun_mos1_xmm0021750501_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 21 09:53:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021750501_pi300-10000_cl_pass0_src1.csv
[Sat Jul 21 09:53:22 2012] fullrun_mos1_xmm0021750501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 21 09:53:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021750501_pi300-10000_cl_pass0_src1.csv
[Sat Jul 21 09:53:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021750501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021750501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 09:53:23 2012] fullrun_mos1_xmm0021750501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 21 09:53:23 2012] fullrun_mos1_xmm0021750501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 21 09:53:23 2012] Fit fullrun_mos1_xmm0021750501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul 21 10:46:38 2012] Spatial fit model total counts = 3162.020000, observed total counts = 3169.000000
[Sat Jul 21 10:46:38 2012] Offset between fit and detection position for source 1 = 0.139288 pixels
[Sat Jul 21 10:46:38 2012] 3154.967000 total counts/ 799.887000 bgd. counts: snr = 83.270533
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.139288 pixels
  Position = (285.6, 279.2) = 16 48 40.28 -69 1 39.5
  Extent = 5.6 (5.4-5.8)", rotation angle = 0
  Source counts = 2355.1 +/- 56.2
  Background counts = 799.9
  Rate = 0.08 +/- 0.002
[Sat Jul 21 10:46:38 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 10:46:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 10:46:38 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 10:46:38 2012] Source does appear to be extended
[Sat Jul 21 10:46:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 11:45:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 21 11:45:20 2012] Initial guess for spatial extent in simple fitting = 5.62"
[Sat Jul 21 11:45:20 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.935
[Sat Jul 21 11:45:20 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.62"
[Sat Jul 21 12:28:20 2012] fullrun_mos1_xmm0021750501_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 21 12:28:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021750501_pi300-10000_cl_pass1_src1.csv
[Sat Jul 21 12:28:20 2012] fullrun_mos1_xmm0021750501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 21 12:28:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021750501_pi300-10000_cl_pass1_src1.csv
[Sat Jul 21 12:28:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021750501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021750501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 12:28:20 2012] fullrun_mos1_xmm0021750501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 21 12:28:20 2012] fullrun_mos1_xmm0021750501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 21 12:28:20 2012] Fit fullrun_mos1_xmm0021750501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 21 13:19:41 2012] Spatial fit model total counts = 3165.630000, observed total counts = 3168.000000
[Sat Jul 21 13:19:41 2012] Offset between fit and detection position for source 1 = 0.015083 pixels
[Sat Jul 21 13:19:41 2012] 3172.049000 total counts/ 832.609000 bgd. counts: snr = 81.075822
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.015083 pixels
  Position = (285.6, 279.2) = 16 48 40.30 -69 1 39.5
  Extent = 5.6 (5.4-5.7)", rotation angle = 0
  Source counts = 2339.4 +/- 56.3
  Background counts = 832.6
  Rate = 0.08 +/- 0.002
[Sat Jul 21 13:19:41 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 13:19:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 13:19:41 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 13:19:41 2012] Source does appear to be extended
[Sat Jul 21 13:19:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 14:22:02 2012] Counts = 2339.440000, rescaling region sizes by 2.000000
[Sat Jul 21 14:22:02 2012] XMMSAS src. selection expression = ellipse(24800.277400, 24242.486000, 668.704819, 668.704819, 0.000000, X, Y)
[Sat Jul 21 14:22:02 2012] Writing source region out to fullrun_mos1_xmm0021750501_pi300-10000_pass1_cl_src1_src.reg
[Sat Jul 21 14:22:02 2012] Extracting stamp from image fullrun_mos1_xmm0021750501_pi300-10000_cl_sm2.00.img.gz, (247, 241) - (324, 318)
[Sat Jul 21 14:22:02 2012] XMMSAS bgd. selection expression = annulus(24800.277400, 24242.486000, 2229.016064, 4458.032128, X, Y) && !ellipse(20327.839140, 26177.612086, 439.257658, 380.274983, 116.377696, X, Y) && !ellipse(23221.466800, 26134.000000, 404.202412, 404.202412, 0.000000, X, Y) && !ellipse(23870.428000, 24143.309800, 523.175215, 251.494407, 45.609116, X, Y) && !ellipse(25448.568080, 28792.980600, 395.152011, 395.152011, 0.000000, X, Y) && !ellipse(28443.702400, 21857.211600, 735.798421, 423.831212, 320.023958, X, Y) && !ellipse(29170.687060, 27968.651200, 697.615476, 697.615476, 0.000000, X, Y) && !ellipse(27944.829200, 22878.335000, 1275.440037, 1275.440037, 0.000000, X, Y)
[Sat Jul 21 14:22:02 2012] Writing fullrun_mos1_xmm0021750501_pi300-10000_pass1_cl_src1.gif
[Sat Jul 21 14:22:06 2012] Mean detx,y = (137.60, -77.41) 
[Sat Jul 21 14:22:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 14:22:26 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 14:22:26 2012] Setting source spectrum file to fullrun_mos1_xmm0021750501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 21 14:22:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0021750501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jul 21 15:18:21 2012] Updating aperture counts using extracted products
[Sat Jul 21 15:18:21 2012] Error reading totcts from fullrun_mos1_xmm0021750501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 21 15:18:22 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 15:18:22 2012] Using photon index=1.80, rate=0.0836, arf fullrun_mos1_xmm0021750501_pi300-10000_pass1_cl_src1.arf
[Sat Jul 21 15:18:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 15:18:22 2012] Updating source flux to 9.8e-13
[Sat Jul 21 15:18:51 2012] Reading fit data from xmm0021750501/analysis//spectral/fullrun_mos1_xmm0021750501_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jul 21 15:18:51 2012] Spectral fit parameter nH value = 3.63493e+21
[Sat Jul 21 15:18:51 2012] Spectral fit parameter PhoIndex value = 4.54658
[Sat Jul 21 15:18:51 2012] Failed to get F(0.3-8.0) from xmm0021750501/analysis//spectral/fullrun_mos1_xmm0021750501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jul 21 15:18:51 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 15:18:51 2012] Using Nh = 3.6e+21, photon index=4.55, rate=0.0836, arf fullrun_mos1_xmm0021750501_pi300-10000_pass1_cl_src1.arf
[Sat Jul 21 15:18:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 15:18:51 2012] Updating source flux to 6.3e-13