[Sat Jul 14 15:51:42 2012] Detection parameters:
  Position = (315.7, 314.0) = 17 30 26.04 52 18 5.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 11738.2 +/- 129.3
  Background counts = 22.5
  Rate = 2 +/- 0.02

[Sat Jul 14 15:51:42 2012] Off-axis axis estimate = 1.68'
[Sat Jul 14 15:52:57 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 15:52:57 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Sat Jul 14 15:52:57 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Sat Jul 14 15:52:57 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Sat Jul 14 16:05:24 2012] fullrun_pn_xmm0021750201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 14 16:05:24 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0021750201_pi300-10000_cl_pass0_src1.csv
[Sat Jul 14 16:05:24 2012] fullrun_pn_xmm0021750201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 14 16:05:24 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0021750201_pi300-10000_cl_pass0_src1.csv
[Sat Jul 14 16:05:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021750201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021750201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 16:05:24 2012] fullrun_pn_xmm0021750201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 14 16:05:24 2012] fullrun_pn_xmm0021750201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 14 16:05:24 2012] Fit fullrun_pn_xmm0021750201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul 14 16:30:36 2012] Spatial fit model total counts = 8719.900000, observed total counts = 8712.000000
[Sat Jul 14 16:30:36 2012] Offset between fit and detection position for source 1 = 0.116798 pixels
[Sat Jul 14 16:30:36 2012] 8708.780000 total counts/ 1810.500000 bgd. counts: snr = 162.121851
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.116798 pixels
  Position = (315.6, 314.0) = 17 30 26.10 52 18 5.2
  Extent = 5.9 (5.8-6.0)", rotation angle = 0
  Source counts = 6898.3 +/- 93.3
  Background counts = 1810.5
  Rate = 1 +/- 0.02
[Sat Jul 14 16:30:36 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 16:30:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 16:30:36 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 16:30:36 2012] Source does appear to be extended
[Sat Jul 14 16:30:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 16:30:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 14 16:30:44 2012] Initial guess for spatial extent in simple fitting = 5.90"
[Sat Jul 14 16:30:44 2012] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.870
[Sat Jul 14 16:30:44 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.90"
[Sat Jul 14 16:40:13 2012] fullrun_pn_xmm0021750201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 14 16:40:13 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0021750201_pi300-10000_cl_pass1_src1.csv
[Sat Jul 14 16:40:13 2012] fullrun_pn_xmm0021750201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 14 16:40:13 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0021750201_pi300-10000_cl_pass1_src1.csv
[Sat Jul 14 16:40:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021750201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021750201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 16:40:13 2012] fullrun_pn_xmm0021750201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 14 16:40:13 2012] fullrun_pn_xmm0021750201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 14 16:40:13 2012] Fit fullrun_pn_xmm0021750201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 14 17:01:58 2012] Spatial fit model total counts = 8719.900000, observed total counts = 8712.000000
[Sat Jul 14 17:01:58 2012] Offset between fit and detection position for source 1 = 0.000000 pixels
[Sat Jul 14 17:01:58 2012] 8708.790000 total counts/ 1810.540000 bgd. counts: snr = 162.119355
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000000 pixels
  Position = (315.6, 314.0) = 17 30 26.10 52 18 5.2
  Extent = 5.9 (5.8-6.0)", rotation angle = 0
  Source counts = 6898.2 +/- 93.3
  Background counts = 1810.5
  Rate = 1 +/- 0.02
[Sat Jul 14 17:01:58 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 17:01:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 17:01:58 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 17:01:58 2012] Source does appear to be extended
[Sat Jul 14 17:01:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 17:02:05 2012] Counts = 6898.250000, rescaling region sizes by 2.000000
[Sat Jul 14 17:02:05 2012] XMMSAS src. selection expression = ellipse(27407.691400, 27265.703400, 708.358820, 708.358820, 0.000000, X, Y)
[Sat Jul 14 17:02:05 2012] Writing source region out to fullrun_pn_xmm0021750201_pi300-10000_pass1_cl_src1_src.reg
[Sat Jul 14 17:02:05 2012] Extracting stamp from image fullrun_pn_xmm0021750201_pi300-10000_cl_sm2.00.img.gz, (275, 273) - (356, 355)
[Sat Jul 14 17:02:05 2012] XMMSAS bgd. selection expression = annulus(27407.691400, 27265.703400, 2361.196068, 4722.392136, X, Y) && !ellipse(23663.117950, 27967.416931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27291.563293, 26153.638977, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 17:02:05 2012] Writing fullrun_pn_xmm0021750201_pi300-10000_pass1_cl_src1.gif
[Sat Jul 14 17:02:11 2012] Mean detx,y = (173.33, -114.08) 
[Sat Jul 14 17:02:13 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 17:03:14 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 17:03:14 2012] Setting source spectrum file to fullrun_pn_xmm0021750201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 14 17:03:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0021750201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jul 14 17:37:00 2012] Updating aperture counts using extracted products
[Sat Jul 14 17:37:00 2012] Error reading totcts from fullrun_pn_xmm0021750201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 14 17:37:00 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 17:37:00 2012] Using photon index=1.80, rate=1.37, arf fullrun_pn_xmm0021750201_pi300-10000_pass1_cl_src1.arf
[Sat Jul 14 17:37:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 17:37:00 2012] Updating source flux to 4.4e-12
[Sat Jul 14 17:38:30 2012] Reading fit data from xmm0021750201/analysis//spectral/fullrun_pn_xmm0021750201_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jul 14 17:38:30 2012] Spectral fit parameter nH value = 8.77207e+21
[Sat Jul 14 17:38:30 2012] Spectral fit parameter PhoIndex value = 7.58958
[Sat Jul 14 17:38:30 2012] Failed to get F(0.3-8.0) from xmm0021750201/analysis//spectral/fullrun_pn_xmm0021750201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jul 14 17:38:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 17:38:30 2012] Using Nh = 8.8e+21, photon index=7.59, rate=1.37, arf fullrun_pn_xmm0021750201_pi300-10000_pass1_cl_src1.arf
[Sat Jul 14 17:38:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 17:38:30 2012] Updating source flux to 2.5e-12