[Sat Jul  7 06:43:46 2012] Detection parameters:
  Position = (285.9, 279.0) = 16 48 40.24 -69 1 39.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2586.8 +/- 60.0
  Background counts = 16.1
  Rate = 0.2 +/- 0.004

[Sat Jul  7 06:43:46 2012] Off-axis axis estimate = 1.68'
[Sat Jul  7 07:14:40 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Sat Jul  7 07:14:40 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Sat Jul  7 07:14:40 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Sat Jul  7 07:14:40 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Sat Jul  7 07:30:23 2012] fullrun_mos2_xmm0021750101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul  7 07:30:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021750101_pi300-10000_cl_pass0_src1.csv
[Sat Jul  7 07:30:23 2012] fullrun_mos2_xmm0021750101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul  7 07:30:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021750101_pi300-10000_cl_pass0_src1.csv
[Sat Jul  7 07:30:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021750101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021750101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  7 07:30:23 2012] fullrun_mos2_xmm0021750101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul  7 07:30:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021750101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jul  7 07:30:23 2012] fullrun_mos2_xmm0021750101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul  7 07:30:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021750101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jul  7 07:30:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021750101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021750101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  7 07:30:29 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.803921 pixels away
[Sat Jul  7 07:30:29 2012] Vigneting correction estimate = 1.000000
[Sat Jul  7 07:30:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul  7 07:30:29 2012] Assessing source extent using major
[Sat Jul  7 07:30:29 2012] Source does appear to be extended
[Sat Jul  7 07:30:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul  7 07:54:28 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Sat Jul  7 07:54:28 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Sat Jul  7 07:54:28 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Sat Jul  7 07:54:28 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.27"
[Sat Jul  7 08:08:07 2012] fullrun_mos2_xmm0021750101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul  7 08:08:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021750101_pi300-10000_cl_pass1_src1.csv
[Sat Jul  7 08:08:07 2012] fullrun_mos2_xmm0021750101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul  7 08:08:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021750101_pi300-10000_cl_pass1_src1.csv
[Sat Jul  7 08:08:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021750101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021750101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  7 08:08:07 2012] fullrun_mos2_xmm0021750101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul  7 08:08:07 2012] fullrun_mos2_xmm0021750101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul  7 08:08:07 2012] Fit fullrun_mos2_xmm0021750101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul  7 08:08:12 2012] Spatial fit model total counts = 2275.120000, observed total counts = 2177.000000
[Sat Jul  7 08:08:12 2012] Offset between fit and detection position for source 1 = 0.054584 pixels
[Sat Jul  7 08:08:12 2012] 2256.227000 total counts/ 578.927000 bgd. counts: snr = 69.710604
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.054584 pixels
  Position = (285.8, 279.0) = 16 48 40.28 -69 1 39.5
  Extent = 5.5 (5.2-5.7)", rotation angle = 0
  Source counts = 1677.3 +/- 47.5
  Background counts = 578.9
  Rate = 0.1 +/- 0.003
[Sat Jul  7 08:08:12 2012] Vigneting correction estimate = 1.000000
[Sat Jul  7 08:08:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul  7 08:08:12 2012] Assessing source extent using major axis lower bound
[Sat Jul  7 08:08:12 2012] Source does appear to be extended
[Sat Jul  7 08:08:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul  7 08:35:41 2012] Counts = 1677.300000, rescaling region sizes by 2.000000
[Sat Jul  7 08:35:41 2012] XMMSAS src. selection expression = ellipse(24816.746760, 24224.749200, 658.950019, 658.950019, 0.000000, X, Y)
[Sat Jul  7 08:35:41 2012] Writing source region out to fullrun_mos2_xmm0021750101_pi300-10000_pass1_cl_src1_src.reg
[Sat Jul  7 08:35:41 2012] Extracting stamp from image fullrun_mos2_xmm0021750101_pi300-10000_cl_sm2.00.img.gz, (248, 241) - (324, 317)
[Sat Jul  7 08:35:41 2012] XMMSAS bgd. selection expression = annulus(24816.746760, 24224.749200, 2196.500063, 4393.000126, X, Y) && !ellipse(20352.681396, 26146.879272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23225.539304, 26101.530619, 365.538485, 213.182739, 88.186361, X, Y) && !ellipse(23856.648346, 24140.585144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29225.390000, 27940.005200, 493.064814, 245.960807, 318.964910, X, Y) && !ellipse(28470.147000, 21851.231600, 461.040013, 461.040013, 0.000000, X, Y) && !ellipse(27919.391200, 22746.639950, 661.727219, 661.727219, 0.000000, X, Y)
[Sat Jul  7 08:35:41 2012] Writing fullrun_mos2_xmm0021750101_pi300-10000_pass1_cl_src1.gif
[Sat Jul  7 08:35:42 2012] Mean detx,y = (-77.06, -61.96) 
[Sat Jul  7 08:35:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul  7 08:35:52 2012] Binned source spectrum to 10 counts/bin
[Sat Jul  7 08:35:52 2012] Setting source spectrum file to fullrun_mos2_xmm0021750101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul  7 08:35:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0021750101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jul  7 08:42:06 2012] Updating aperture counts using extracted products
[Sat Jul  7 08:42:06 2012] Error reading totcts from fullrun_mos2_xmm0021750101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul  7 08:42:06 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul  7 08:42:06 2012] Using photon index=1.80, rate=0.105, arf fullrun_mos2_xmm0021750101_pi300-10000_pass1_cl_src1.arf
[Sat Jul  7 08:42:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul  7 08:42:06 2012] Updating source flux to 1.4e-12
[Sat Jul  7 08:42:27 2012] Reading fit data from xmm0021750101/analysis//spectral/fullrun_mos2_xmm0021750101_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jul  7 08:42:27 2012] Spectral fit parameter nH value = 4.08092e+21
[Sat Jul  7 08:42:27 2012] Spectral fit parameter PhoIndex value = 4.75731
[Sat Jul  7 08:42:27 2012] Failed to get F(0.3-8.0) from xmm0021750101/analysis//spectral/fullrun_mos2_xmm0021750101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jul  7 08:42:27 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul  7 08:42:27 2012] Using Nh = 4.1e+21, photon index=4.76, rate=0.105, arf fullrun_mos2_xmm0021750101_pi300-10000_pass1_cl_src1.arf
[Sat Jul  7 08:42:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul  7 08:42:27 2012] Updating source flux to 8.6e-13