[Sat Jul  7 06:43:26 2012] Detection parameters:
  Position = (286.0, 279.0) = 16 48 40.16 -69 1 38.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2543.9 +/- 61.0
  Background counts = 15.4
  Rate = 0.2 +/- 0.004

[Sat Jul  7 06:43:26 2012] Off-axis axis estimate = 1.67'
[Sat Jul  7 07:00:38 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Sat Jul  7 07:00:38 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Sat Jul  7 07:00:38 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Sat Jul  7 07:00:38 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Sat Jul  7 07:14:39 2012] fullrun_mos1_xmm0021750101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul  7 07:14:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021750101_pi300-10000_cl_pass0_src1.csv
[Sat Jul  7 07:14:39 2012] fullrun_mos1_xmm0021750101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul  7 07:14:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021750101_pi300-10000_cl_pass0_src1.csv
[Sat Jul  7 07:14:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021750101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021750101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  7 07:14:40 2012] fullrun_mos1_xmm0021750101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul  7 07:14:40 2012] fullrun_mos1_xmm0021750101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul  7 07:14:40 2012] Fit fullrun_mos1_xmm0021750101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul  7 07:30:27 2012] Spatial fit model total counts = 2161.020000, observed total counts = 2155.000000
[Sat Jul  7 07:30:27 2012] Offset between fit and detection position for source 1 = 0.048369 pixels
[Sat Jul  7 07:30:27 2012] 2151.279000 total counts/ 524.109000 bgd. counts: snr = 71.075859
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.048369 pixels
  Position = (285.9, 279.0) = 16 48 40.20 -69 1 39.6
  Extent = 5.8 (5.6-6.1)", rotation angle = 0
  Source counts = 1627.2 +/- 46.4
  Background counts = 524.1
  Rate = 0.1 +/- 0.003
[Sat Jul  7 07:30:27 2012] Vigneting correction estimate = 1.000000
[Sat Jul  7 07:30:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul  7 07:30:27 2012] Assessing source extent using major axis lower bound
[Sat Jul  7 07:30:27 2012] Source does appear to be extended
[Sat Jul  7 07:30:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul  7 07:45:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul  7 07:45:22 2012] Initial guess for spatial extent in simple fitting = 5.83"
[Sat Jul  7 07:45:22 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.180
[Sat Jul  7 07:45:22 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.83"
[Sat Jul  7 07:54:28 2012] fullrun_mos1_xmm0021750101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul  7 07:54:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021750101_pi300-10000_cl_pass1_src1.csv
[Sat Jul  7 07:54:28 2012] fullrun_mos1_xmm0021750101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul  7 07:54:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021750101_pi300-10000_cl_pass1_src1.csv
[Sat Jul  7 07:54:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021750101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021750101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  7 07:54:28 2012] fullrun_mos1_xmm0021750101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul  7 07:54:28 2012] fullrun_mos1_xmm0021750101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul  7 07:54:28 2012] Fit fullrun_mos1_xmm0021750101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul  7 08:08:11 2012] Warning, spatial fit 1 centroid is now closest to src. 3
[Sat Jul  7 08:08:11 2012] Vigneting correction estimate = 1.000000
[Sat Jul  7 08:08:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul  7 08:08:11 2012] Assessing source extent using major axis lower bound
[Sat Jul  7 08:08:11 2012] Source does appear to be extended
[Sat Jul  7 08:08:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul  7 08:28:07 2012] Counts = 1627.170000, rescaling region sizes by 2.000000
[Sat Jul  7 08:28:07 2012] XMMSAS src. selection expression = ellipse(24825.729320, 24223.658400, 699.932420, 699.932420, 0.000000, X, Y)
[Sat Jul  7 08:28:07 2012] Writing source region out to fullrun_mos1_xmm0021750101_pi300-10000_pass1_cl_src1_src.reg
[Sat Jul  7 08:28:07 2012] Extracting stamp from image fullrun_mos1_xmm0021750101_pi300-10000_cl_sm2.00.img.gz, (246, 239) - (326, 319)
[Sat Jul  7 08:28:07 2012] XMMSAS bgd. selection expression = annulus(24825.729320, 24223.658400, 2333.108067, 4666.216134, X, Y) && !ellipse(20348.235550, 26149.698914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23214.336400, 26112.811400, 324.889609, 324.889609, 0.000000, X, Y) && !ellipse(25507.497600, 28758.821600, 365.781611, 365.781611, 0.000000, X, Y) && !ellipse(28401.544170, 21834.272200, 590.197617, 590.197617, 0.000000, X, Y)
[Sat Jul  7 08:28:07 2012] Writing fullrun_mos1_xmm0021750101_pi300-10000_pass1_cl_src1.gif
[Sat Jul  7 08:28:08 2012] Mean detx,y = (162.15, -92.43) 
[Sat Jul  7 08:28:09 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul  7 08:28:19 2012] Binned source spectrum to 10 counts/bin
[Sat Jul  7 08:28:19 2012] Setting source spectrum file to fullrun_mos1_xmm0021750101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul  7 08:28:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0021750101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jul  7 08:42:05 2012] Updating aperture counts using extracted products
[Sat Jul  7 08:42:05 2012] Error reading totcts from fullrun_mos1_xmm0021750101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul  7 08:42:05 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul  7 08:42:05 2012] Using photon index=1.80, rate=0.103, arf fullrun_mos1_xmm0021750101_pi300-10000_pass1_cl_src1.arf
[Sat Jul  7 08:42:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul  7 08:42:05 2012] Updating source flux to 1.2e-12
[Sat Jul  7 08:42:15 2012] Reading fit data from xmm0021750101/analysis//spectral/fullrun_mos1_xmm0021750101_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jul  7 08:42:15 2012] Spectral fit parameter nH value = 4.1372e+21
[Sat Jul  7 08:42:15 2012] Spectral fit parameter PhoIndex value = 4.72981
[Sat Jul  7 08:42:15 2012] Failed to get F(0.3-8.0) from xmm0021750101/analysis//spectral/fullrun_mos1_xmm0021750101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jul  7 08:42:15 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul  7 08:42:15 2012] Using Nh = 4.1e+21, photon index=4.73, rate=0.103, arf fullrun_mos1_xmm0021750101_pi300-10000_pass1_cl_src1.arf
[Sat Jul  7 08:42:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul  7 08:42:15 2012] Updating source flux to 7.5e-13