[Thu Jul 19 12:25:55 2012] Detection parameters:
  Position = (289.3, 274.0) = 13 11 7.71 27 28 2.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.5 +/- 15.3
  Background counts = 35.4
  Rate = 0.002 +/- 0.0004

[Thu Jul 19 12:25:56 2012] Off-axis axis estimate = 1.89'
[Thu Jul 19 12:30:13 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 12:30:13 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Thu Jul 19 12:30:13 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.830
[Thu Jul 19 12:30:13 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 7.37"
[Thu Jul 19 14:09:50 2012] fullrun_pn_xmm0021740201_pi300-10000_cl_pass0_src49.ximg exists
[Thu Jul 19 14:09:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021740201_pi300-10000_cl_pass0_src49.csv
[Thu Jul 19 14:09:50 2012] fullrun_pn_xmm0021740201_pi300-10000_cl_pass0_src49_1.ximg exists
[Thu Jul 19 14:09:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021740201_pi300-10000_cl_pass0_src49.csv
[Thu Jul 19 14:09:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021740201_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021740201_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 14:09:51 2012] fullrun_pn_xmm0021740201_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Thu Jul 19 14:09:51 2012] fullrun_pn_xmm0021740201_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Thu Jul 19 14:09:51 2012] Fit fullrun_pn_xmm0021740201_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Thu Jul 19 16:10:46 2012] Source 50 is offset by 7.054911 and 5.812663 pixels which is larger than
2 X fitted extent = 0.847531 x 0.847531, not incorporating fit results
[Thu Jul 19 16:10:46 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 16:10:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 16:10:46 2012] Assessing source extent using major
[Thu Jul 19 16:10:46 2012] Source does appear to be extended
[Thu Jul 19 16:10:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 16:11:14 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 16:11:14 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Thu Jul 19 16:11:14 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.830
[Thu Jul 19 16:11:14 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 7.37"
[Thu Jul 19 17:23:16 2012] fullrun_pn_xmm0021740201_pi300-10000_cl_pass1_src48.ximg exists
[Thu Jul 19 17:23:16 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0021740201_pi300-10000_cl_pass1_src48.csv
[Thu Jul 19 17:23:16 2012] fullrun_pn_xmm0021740201_pi300-10000_cl_pass1_src48_1.ximg exists
[Thu Jul 19 17:23:16 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0021740201_pi300-10000_cl_pass1_src48.csv
[Thu Jul 19 17:23:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021740201_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021740201_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 17:23:16 2012] fullrun_pn_xmm0021740201_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Thu Jul 19 17:23:16 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0021740201_pi300-10000_cl_pass1_tfrozen_src48.csv
[Thu Jul 19 17:23:16 2012] fullrun_pn_xmm0021740201_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Thu Jul 19 17:23:16 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0021740201_pi300-10000_cl_pass1_tfrozen_src48.csv
[Thu Jul 19 17:23:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021740201_pi300-10000_cl_pass1_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021740201_pi300-10000_cl_pass1_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 19:03:48 2012] Spatial fit model total counts = -145.520000, observed total counts = 661.000000
[Thu Jul 19 19:03:48 2012] Poor agreement between spatial fit and data for source 50
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul 19 19:03:48 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 19:03:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 19:03:48 2012] Assessing source extent using major
[Thu Jul 19 19:03:48 2012] Source does appear to be extended
[Thu Jul 19 19:03:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 19:04:16 2012] XMMSAS src. selection expression = ellipse(25118.395264, 23792.319641, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 19 19:04:16 2012] Writing source region out to fullrun_pn_xmm0021740201_pi300-10000_pass1_cl_src50_src.reg
[Thu Jul 19 19:04:16 2012] Extracting stamp from image fullrun_pn_xmm0021740201_pi300-10000_cl_sm2.00.img.gz, (252, 237) - (327, 312)
[Thu Jul 19 19:04:16 2012] XMMSAS bgd. selection expression = annulus(25118.395264, 23792.319641, 1087.500000, 2175.000000, X, Y) && !ellipse(23709.453540, 24266.042600, 409.244812, 409.244812, 0.000000, X, Y) && !ellipse(25915.866000, 23891.798400, 487.632814, 427.490412, 347.054136, X, Y) && !ellipse(27663.828600, 23601.833260, 671.403219, 671.403219, 0.000000, X, Y) && !ellipse(23721.238372, 27428.007289, 1480.071583, 521.177075, 325.927582, X, Y) && !ellipse(24763.437891, 26124.625611, 605.342757, 274.559146, 23.797459, X, Y) && !ellipse(26721.210200, 24901.504240, 357.485610, 357.485610, 0.000000, X, Y) && !ellipse(25407.618225, 21877.918732, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 19 19:04:16 2012] Writing fullrun_pn_xmm0021740201_pi300-10000_pass1_cl_src50.gif
[Thu Jul 19 19:28:43 2012] Mean detx,y = (746.10, 135.81) 
[Thu Jul 19 19:28:45 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 19:29:06 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 19:29:07 2012] Setting source spectrum file to fullrun_pn_xmm0021740201_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Thu Jul 19 19:29:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0021740201_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Thu Jul 19 20:19:21 2012] Not generating rmf since there are only 85 counts
[Thu Jul 19 20:19:21 2012] rmf not generated due to insufficient counts
[Thu Jul 19 21:18:29 2012] Updating aperture counts using extracted products
[Thu Jul 19 21:18:29 2012] Error reading totcts from fullrun_pn_xmm0021740201_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Thu Jul 19 21:18:30 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 21:18:30 2012] Using photon index=1.80, rate=0.00241, arf fullrun_pn_xmm0021740201_pi300-10000_pass1_cl_src50.arf
[Thu Jul 19 21:18:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 21:18:30 2012] Updating source flux to 6e-15
[Thu Jul 19 21:19:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting