[Thu Jul 19 12:25:54 2012] Detection parameters:
  Position = (342.0, 113.3) = 13 10 50.49 27 16 21.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.7 +/- 16.2
  Background counts = 27.0
  Rate = 0.002 +/- 0.0004

[Thu Jul 19 12:25:56 2012] Off-axis axis estimate = 13.79'
[Thu Jul 19 12:30:13 2012] Using EEF radius (= 13.32 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 12:30:13 2012] Initial guess for spatial extent in simple fitting = 13.32"
[Thu Jul 19 12:30:13 2012] source mask rpix=3.1, npix_max = 50, mask sum = 56, frac = 1.103
[Thu Jul 19 12:30:13 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 13.32"
[Thu Jul 19 14:09:50 2012] fullrun_pn_xmm0021740201_pi300-10000_cl_pass0_src27.ximg exists
[Thu Jul 19 14:09:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021740201_pi300-10000_cl_pass0_src27.csv
[Thu Jul 19 14:09:50 2012] fullrun_pn_xmm0021740201_pi300-10000_cl_pass0_src27_1.ximg exists
[Thu Jul 19 14:09:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021740201_pi300-10000_cl_pass0_src27.csv
[Thu Jul 19 14:09:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021740201_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021740201_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 14:09:51 2012] fullrun_pn_xmm0021740201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Thu Jul 19 14:09:51 2012] fullrun_pn_xmm0021740201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Thu Jul 19 14:09:51 2012] Fit fullrun_pn_xmm0021740201_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Thu Jul 19 16:10:45 2012] Warning, spatial fit 27 centroid is now closest to src. 1
[Thu Jul 19 16:10:46 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 16:10:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 16:10:46 2012] Assessing source extent using major
[Thu Jul 19 16:10:46 2012] Source does appear to be extended
[Thu Jul 19 16:10:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 16:11:14 2012] Using EEF radius (= 13.32 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 16:11:14 2012] Initial guess for spatial extent in simple fitting = 13.32"
[Thu Jul 19 16:11:14 2012] source mask rpix=3.1, npix_max = 50, mask sum = 56, frac = 1.103
[Thu Jul 19 16:11:14 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 13.32"
[Thu Jul 19 17:23:15 2012] fullrun_pn_xmm0021740201_pi300-10000_cl_pass1_src27.ximg exists
[Thu Jul 19 17:23:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021740201_pi300-10000_cl_pass1_src27.csv
[Thu Jul 19 17:23:15 2012] fullrun_pn_xmm0021740201_pi300-10000_cl_pass1_src27_1.ximg exists
[Thu Jul 19 17:23:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021740201_pi300-10000_cl_pass1_src27.csv
[Thu Jul 19 17:23:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021740201_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021740201_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 17:23:16 2012] fullrun_pn_xmm0021740201_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Thu Jul 19 17:23:16 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0021740201_pi300-10000_cl_pass1_tfrozen_src27.csv
[Thu Jul 19 17:23:16 2012] fullrun_pn_xmm0021740201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Thu Jul 19 17:23:16 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0021740201_pi300-10000_cl_pass1_tfrozen_src27.csv
[Thu Jul 19 17:23:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021740201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021740201_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 19:03:48 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 19.583376 pixels away
[Thu Jul 19 19:03:48 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 18.566226 pixels away
[Thu Jul 19 19:03:48 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 19:03:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 19:03:48 2012] Assessing source extent using major
[Thu Jul 19 19:03:48 2012] Source does appear to be extended
[Thu Jul 19 19:03:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 19:04:16 2012] XMMSAS src. selection expression = ellipse(29708.826752, 9808.022133, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 19 19:04:16 2012] Writing source region out to fullrun_pn_xmm0021740201_pi300-10000_pass1_cl_src28_src.reg
[Thu Jul 19 19:04:16 2012] Extracting stamp from image fullrun_pn_xmm0021740201_pi300-10000_cl_sm2.00.img.gz, (305, 76) - (380, 151)
[Thu Jul 19 19:04:16 2012] XMMSAS bgd. selection expression = annulus(29708.826752, 9808.022133, 1087.500000, 2175.000000, X, Y) && !ellipse(30416.914000, 10149.044000, 645.310419, 645.310419, 0.000000, X, Y) && !ellipse(32128.845340, 11308.733200, 423.962412, 423.962412, 0.000000, X, Y) && !ellipse(27291.300446, 8122.746269, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 19 19:04:16 2012] Writing fullrun_pn_xmm0021740201_pi300-10000_pass1_cl_src28.gif
[Thu Jul 19 19:18:11 2012] Mean detx,y = (4753.07, -13997.71) 
[Thu Jul 19 19:18:13 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 19:18:46 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 19:18:47 2012] Setting source spectrum file to fullrun_pn_xmm0021740201_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu Jul 19 19:18:47 2012] Setting bgd. spectrum file to fullrun_pn_xmm0021740201_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Thu Jul 19 20:11:02 2012] Not generating rmf since there are only 88 counts
[Thu Jul 19 20:11:02 2012] rmf not generated due to insufficient counts
[Thu Jul 19 21:18:29 2012] Updating aperture counts using extracted products
[Thu Jul 19 21:18:29 2012] Error reading totcts from fullrun_pn_xmm0021740201_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu Jul 19 21:18:30 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 21:18:30 2012] Using photon index=1.80, rate=0.00221, arf fullrun_pn_xmm0021740201_pi300-10000_pass1_cl_src28.arf
[Thu Jul 19 21:18:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 21:18:30 2012] Updating source flux to 1.5e-14
[Thu Jul 19 21:19:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting