[Thu Jul 19 12:27:36 2012] Detection parameters:
  Position = (218.8, 207.5) = 13 11 30.74 27 23 14.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.5 +/- 8.8
  Background counts = 10.6
  Rate = 0.001 +/- 0.0003

[Thu Jul 19 12:27:36 2012] Off-axis axis estimate = 8.77'
[Thu Jul 19 15:10:40 2012] Using EEF radius (= 10.81 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 15:10:40 2012] Initial guess for spatial extent in simple fitting = 10.81"
[Thu Jul 19 15:10:40 2012] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.842
[Thu Jul 19 15:10:40 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 10.81"
[Thu Jul 19 16:10:32 2012] fullrun_mos2_xmm0021740201_pi300-10000_cl_pass0_src25.ximg exists
[Thu Jul 19 16:10:32 2012] fullrun_mos2_xmm0021740201_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu Jul 19 16:10:32 2012] Fit fullrun_mos2_xmm0021740201_pi300-10000_cl_pass0_src25 appears to have run properly
[Thu Jul 19 16:10:32 2012] fullrun_mos2_xmm0021740201_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu Jul 19 16:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021740201_pi300-10000_cl_pass0_tfrozen_src25.csv
[Thu Jul 19 16:10:32 2012] fullrun_mos2_xmm0021740201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu Jul 19 16:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021740201_pi300-10000_cl_pass0_tfrozen_src25.csv
[Thu Jul 19 16:10:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021740201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021740201_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 16:11:00 2012] Spatial fit model total counts = 150.917000, observed total counts = 137.000000
[Thu Jul 19 16:11:00 2012] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul 19 16:11:00 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 16:11:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 16:11:00 2012] Assessing source extent using major
[Thu Jul 19 16:11:00 2012] Source does appear to be extended
[Thu Jul 19 16:11:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 18:15:50 2012] Using EEF radius (= 10.81 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 18:15:50 2012] Initial guess for spatial extent in simple fitting = 10.81"
[Thu Jul 19 18:15:50 2012] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.842
[Thu Jul 19 18:15:50 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 10.81"
[Thu Jul 19 19:03:36 2012] fullrun_mos2_xmm0021740201_pi300-10000_cl_pass1_src25.ximg exists
[Thu Jul 19 19:03:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021740201_pi300-10000_cl_pass1_src25.csv
[Thu Jul 19 19:03:36 2012] fullrun_mos2_xmm0021740201_pi300-10000_cl_pass1_src25_1.ximg exists
[Thu Jul 19 19:03:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021740201_pi300-10000_cl_pass1_src25.csv
[Thu Jul 19 19:03:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021740201_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021740201_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 19:03:36 2012] fullrun_mos2_xmm0021740201_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Thu Jul 19 19:03:36 2012] fullrun_mos2_xmm0021740201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Thu Jul 19 19:03:36 2012] Fit fullrun_mos2_xmm0021740201_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Thu Jul 19 19:04:02 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 112.120087 pixels away
[Thu Jul 19 19:04:02 2012] Spatial fit model total counts = 148.069000, observed total counts = 137.000000
[Thu Jul 19 19:04:02 2012] Offset between fit and detection position for source 37 = 0.210596 pixels
[Thu Jul 19 19:04:02 2012] 147.030800 total counts/ 109.456000 bgd. counts: snr = 3.591508
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.210596 pixels
  Position = (219.0, 207.4) = 13 11 30.67 27 23 13.1
  Extent = 7.4 (3.4-10.9)", rotation angle = 0
  Source counts = 37.6 +/- 12.1
  Background counts = 109.5
  Rate = 0.0009 +/- 0.0003
[Thu Jul 19 19:04:02 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 19:04:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 19:04:02 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 19:04:02 2012] Source does appear to be extended
[Thu Jul 19 19:04:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 20:50:24 2012] XMMSAS src. selection expression = ellipse(19001.847840, 17999.445600, 446.025613, 446.025613, 0.000000, X, Y)
[Thu Jul 19 20:50:24 2012] Writing source region out to fullrun_mos2_xmm0021740201_pi300-10000_pass1_cl_src37_src.reg
[Thu Jul 19 20:50:24 2012] Extracting stamp from image fullrun_mos2_xmm0021740201_pi300-10000_cl_sm2.00.img.gz, (193, 182) - (245, 233)
[Thu Jul 19 20:50:24 2012] XMMSAS bgd. selection expression = annulus(19001.847840, 17999.445600, 743.376021, 1486.752043, X, Y)
[Thu Jul 19 20:50:24 2012] Writing fullrun_mos2_xmm0021740201_pi300-10000_pass1_cl_src37.gif
[Thu Jul 19 20:56:54 2012] Mean detx,y = (-8964.72, 1114.38) 
[Thu Jul 19 20:56:55 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 20:57:02 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 20:57:02 2012] Setting source spectrum file to fullrun_mos2_xmm0021740201_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Thu Jul 19 20:57:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0021740201_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Thu Jul 19 21:16:55 2012] Not generating rmf since there are only 37 counts
[Thu Jul 19 21:16:55 2012] rmf not generated due to insufficient counts
[Thu Jul 19 21:18:32 2012] Updating aperture counts using extracted products
[Thu Jul 19 21:18:32 2012] Error reading totcts from fullrun_mos2_xmm0021740201_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Thu Jul 19 21:18:32 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 21:18:32 2012] Using photon index=1.80, rate=0.000864, arf fullrun_mos2_xmm0021740201_pi300-10000_pass1_cl_src37.arf
[Thu Jul 19 21:18:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 21:18:32 2012] Updating source flux to 1.6e-14
[Thu Jul 19 21:18:51 2012] Flag p found in src. 37 procflags, skipping spectral fitting
[Thu Jul 19 21:18:51 2012] Source 37 has fewer than 100.000000 counts, skipping spectral fitting