[Thu Jul 19 12:27:36 2012] Detection parameters:
  Position = (467.2, 248.4) = 13 10 9.56 27 26 13.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.3 +/- 8.3
  Background counts = 8.0
  Rate = 0.0007 +/- 0.0002

[Thu Jul 19 12:27:36 2012] Off-axis axis estimate = 12.76'
[Thu Jul 19 15:10:40 2012] Using EEF radius (= 12.81 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 15:10:40 2012] Initial guess for spatial extent in simple fitting = 12.81"
[Thu Jul 19 15:10:40 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.032
[Thu Jul 19 15:10:40 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 12.81"
[Thu Jul 19 16:10:32 2012] fullrun_mos2_xmm0021740201_pi300-10000_cl_pass0_src40.ximg exists
[Thu Jul 19 16:10:32 2012] fullrun_mos2_xmm0021740201_pi300-10000_cl_pass0_src40_1.ximg exists
[Thu Jul 19 16:10:32 2012] Fit fullrun_mos2_xmm0021740201_pi300-10000_cl_pass0_src40 appears to have run properly
[Thu Jul 19 16:10:33 2012] fullrun_mos2_xmm0021740201_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Thu Jul 19 16:10:33 2012] fullrun_mos2_xmm0021740201_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Thu Jul 19 16:10:33 2012] Fit fullrun_mos2_xmm0021740201_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Thu Jul 19 16:11:00 2012] Spatial fit model total counts = 128.997000, observed total counts = 129.000000
[Thu Jul 19 16:11:00 2012] Offset between fit and detection position for source 36 = 0.720169 pixels
[Thu Jul 19 16:11:00 2012] 129.205200 total counts/ 105.825000 bgd. counts: snr = 2.272763
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.720169 pixels
  Position = (466.5, 248.5) = 13 10 9.80 27 26 11.0
  Extent = 7.6 (4.7-12.2)", rotation angle = 0
  Source counts = 23.4 +/- 11.4
  Background counts = 105.8
  Rate = 0.0005 +/- 0.0003
[Thu Jul 19 16:11:00 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 16:11:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 16:11:00 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 16:11:00 2012] Source does appear to be extended
[Thu Jul 19 16:11:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 18:15:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 19 18:15:50 2012] Initial guess for spatial extent in simple fitting = 7.59"
[Thu Jul 19 18:15:50 2012] source mask rpix=1.7, npix_max = 20, mask sum = 25, frac = 1.240
[Thu Jul 19 18:15:50 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 7.59"
[Thu Jul 19 19:03:36 2012] fullrun_mos2_xmm0021740201_pi300-10000_cl_pass1_src38.ximg exists
[Thu Jul 19 19:03:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021740201_pi300-10000_cl_pass1_src38.csv
[Thu Jul 19 19:03:36 2012] fullrun_mos2_xmm0021740201_pi300-10000_cl_pass1_src38_1.ximg exists
[Thu Jul 19 19:03:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021740201_pi300-10000_cl_pass1_src38.csv
[Thu Jul 19 19:03:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021740201_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021740201_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 19:03:36 2012] fullrun_mos2_xmm0021740201_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Thu Jul 19 19:03:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021740201_pi300-10000_cl_pass1_tfrozen_src38.csv
[Thu Jul 19 19:03:36 2012] fullrun_mos2_xmm0021740201_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Thu Jul 19 19:03:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021740201_pi300-10000_cl_pass1_tfrozen_src38.csv
[Thu Jul 19 19:03:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021740201_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021740201_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 19:04:02 2012] Warning, spatial fit 38 centroid is now closest to src. 13
[Thu Jul 19 19:04:02 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 19:04:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 19:04:02 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 19:04:02 2012] Source does appear to be extended
[Thu Jul 19 19:04:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 20:50:24 2012] XMMSAS src. selection expression = ellipse(40539.159400, 21567.799400, 455.533813, 455.533813, 0.000000, X, Y)
[Thu Jul 19 20:50:24 2012] Writing source region out to fullrun_mos2_xmm0021740201_pi300-10000_pass1_cl_src36_src.reg
[Thu Jul 19 20:50:24 2012] Extracting stamp from image fullrun_mos2_xmm0021740201_pi300-10000_cl_sm2.00.img.gz, (440, 222) - (493, 275)
[Thu Jul 19 20:50:24 2012] XMMSAS bgd. selection expression = annulus(40539.159400, 21567.799400, 759.223022, 1518.446044, X, Y)
[Thu Jul 19 20:50:24 2012] Writing fullrun_mos2_xmm0021740201_pi300-10000_pass1_cl_src36.gif
[Thu Jul 19 20:59:22 2012] Mean detx,y = (10916.85, 10100.38) 
[Thu Jul 19 20:59:23 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 20:59:30 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 20:59:30 2012] Setting source spectrum file to fullrun_mos2_xmm0021740201_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Thu Jul 19 20:59:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0021740201_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Thu Jul 19 21:17:48 2012] Not generating rmf since there are only 23 counts
[Thu Jul 19 21:17:48 2012] rmf not generated due to insufficient counts
[Thu Jul 19 21:18:32 2012] Updating aperture counts using extracted products
[Thu Jul 19 21:18:32 2012] Error reading totcts from fullrun_mos2_xmm0021740201_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Thu Jul 19 21:18:32 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 21:18:32 2012] Using photon index=1.80, rate=0.000537, arf fullrun_mos2_xmm0021740201_pi300-10000_pass1_cl_src36.arf
[Thu Jul 19 21:18:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 21:18:32 2012] Updating source flux to 2.1e-14
[Thu Jul 19 21:18:51 2012] Source 36 has fewer than 100.000000 counts, skipping spectral fitting