[Thu Jul 19 12:26:39 2012] Detection parameters:
  Position = (335.6, 253.4) = 13 10 52.58 27 26 28.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 236.8 +/- 19.5
  Background counts = 11.4
  Rate = 0.007 +/- 0.0006

[Thu Jul 19 12:26:41 2012] Off-axis axis estimate = 4.23'
[Thu Jul 19 14:09:52 2012] Using EEF radius (= 8.54 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 14:09:52 2012] Initial guess for spatial extent in simple fitting = 8.54"
[Thu Jul 19 14:09:52 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.824
[Thu Jul 19 14:09:52 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.54"
[Thu Jul 19 15:10:39 2012] fullrun_mos1_xmm0021740201_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jul 19 15:10:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021740201_pi300-10000_cl_pass0_src3.csv
[Thu Jul 19 15:10:39 2012] fullrun_mos1_xmm0021740201_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jul 19 15:10:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021740201_pi300-10000_cl_pass0_src3.csv
[Thu Jul 19 15:10:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021740201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021740201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 15:10:39 2012] fullrun_mos1_xmm0021740201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jul 19 15:10:39 2012] fullrun_mos1_xmm0021740201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jul 19 15:10:39 2012] Fit fullrun_mos1_xmm0021740201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Jul 19 16:10:53 2012] Spatial fit model total counts = 271.517000, observed total counts = 288.000000
[Thu Jul 19 16:10:53 2012] Offset between fit and detection position for source 5 = 0.767078 pixels
[Thu Jul 19 16:10:53 2012] 272.306000 total counts/ 142.674000 bgd. counts: snr = 10.852750
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.767078 pixels
  Position = (335.4, 252.7) = 13 10 52.65 27 26 30.2
  Extent = 3.9 (3.3-4.6)", rotation angle = 0
  Source counts = 129.6 +/- 16.5
  Background counts = 142.7
  Rate = 0.003 +/- 0.0004
[Thu Jul 19 16:10:53 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 16:10:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 16:10:53 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 16:10:53 2012] Source does appear to be extended
[Thu Jul 19 16:10:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 17:23:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 19 17:23:16 2012] Initial guess for spatial extent in simple fitting = 3.92"
[Thu Jul 19 17:23:16 2012] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.765
[Thu Jul 19 17:23:16 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 3.92"
[Thu Jul 19 18:15:49 2012] fullrun_mos1_xmm0021740201_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jul 19 18:15:49 2012] fullrun_mos1_xmm0021740201_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jul 19 18:15:49 2012] Fit fullrun_mos1_xmm0021740201_pi300-10000_cl_pass1_src3 appears to have run properly
[Thu Jul 19 18:15:49 2012] fullrun_mos1_xmm0021740201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jul 19 18:15:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021740201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Jul 19 18:15:49 2012] fullrun_mos1_xmm0021740201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jul 19 18:15:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021740201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Jul 19 18:15:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021740201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021740201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 19:03:55 2012] Warning, spatial fit 3 centroid is now closest to src. 30
[Thu Jul 19 19:03:55 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 19:03:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 19:03:55 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 19:03:55 2012] Source does appear to be extended
[Thu Jul 19 19:03:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 20:25:57 2012] XMMSAS src. selection expression = ellipse(29130.286600, 21937.227400, 235.018207, 235.018207, 0.000000, X, Y)
[Thu Jul 19 20:25:57 2012] Writing source region out to fullrun_mos1_xmm0021740201_pi300-10000_pass1_cl_src5_src.reg
[Thu Jul 19 20:25:57 2012] Extracting stamp from image fullrun_mos1_xmm0021740201_pi300-10000_cl_sm2.00.img.gz, (322, 239) - (349, 266)
[Thu Jul 19 20:25:57 2012] XMMSAS bgd. selection expression = annulus(29130.286600, 21937.227400, 391.697011, 783.394023, X, Y) && !ellipse(29469.927216, 22907.836456, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 19 20:25:57 2012] Writing fullrun_mos1_xmm0021740201_pi300-10000_pass1_cl_src5.gif
[Thu Jul 19 20:27:59 2012] Mean detx,y = (3709.86, -1792.77) 
[Thu Jul 19 20:27:59 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 20:28:06 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 20:28:06 2012] Setting source spectrum file to fullrun_mos1_xmm0021740201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jul 19 20:28:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0021740201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Jul 19 21:18:30 2012] Updating aperture counts using extracted products
[Thu Jul 19 21:18:30 2012] Error reading totcts from fullrun_mos1_xmm0021740201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jul 19 21:18:31 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 21:18:31 2012] Using photon index=1.80, rate=0.00298, arf fullrun_mos1_xmm0021740201_pi300-10000_pass1_cl_src5.arf
[Thu Jul 19 21:18:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 21:18:31 2012] Updating source flux to 5.4e-14
[Thu Jul 19 21:18:51 2012] Reading fit data from xmm0021740201/analysis//spectral/fullrun_mos1_xmm0021740201_pi300-10000_pass1_cl_src5_pl.csv
[Thu Jul 19 21:18:51 2012] Spectral fit parameter nH value = 1.87544e+12
[Thu Jul 19 21:18:51 2012] Spectral fit parameter PhoIndex value = 2.70723
[Thu Jul 19 21:18:51 2012] Failed to get F(0.3-8.0) from xmm0021740201/analysis//spectral/fullrun_mos1_xmm0021740201_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Thu Jul 19 21:18:51 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 21:18:51 2012] Using Nh = 1.9e+12, photon index=2.71, rate=0.00298, arf fullrun_mos1_xmm0021740201_pi300-10000_pass1_cl_src5.arf
[Thu Jul 19 21:18:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 21:18:51 2012] Updating source flux to 4.2e-14