[Sat Jun 22 09:06:40 2013] Detection parameters:
  Position = (432.0, 411.3) = 9 39 3.94 36 3 52.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.7 +/- 11.9
  Background counts = 25.8
  Rate = 0.002 +/- 0.0003

[Sat Jun 22 09:06:41 2013] Off-axis axis estimate = 12.68'
[Sat Jun 22 10:06:39 2013] Using EEF radius (= 12.77 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 10:06:39 2013] Initial guess for spatial extent in simple fitting = 12.77"
[Sat Jun 22 10:06:39 2013] source mask rpix=2.9, npix_max = 47, mask sum = 41, frac = 0.869
[Sat Jun 22 10:06:39 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 12.77"
[Sat Jun 22 10:43:19 2013] fullrun_mos2_xmm0021740101_pi300-10000_cl_pass0_src18.ximg exists
[Sat Jun 22 10:43:19 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0021740101_pi300-10000_cl_pass0_src18.csv
[Sat Jun 22 10:43:19 2013] fullrun_mos2_xmm0021740101_pi300-10000_cl_pass0_src18_1.ximg exists
[Sat Jun 22 10:43:19 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0021740101_pi300-10000_cl_pass0_src18.csv
[Sat Jun 22 10:43:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021740101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021740101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 10:43:19 2013] fullrun_mos2_xmm0021740101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sat Jun 22 10:43:19 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0021740101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sat Jun 22 10:43:19 2013] fullrun_mos2_xmm0021740101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sat Jun 22 10:43:19 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0021740101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sat Jun 22 10:43:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021740101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021740101_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 10:43:34 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 17.113853 pixels away
[Sat Jun 22 10:43:34 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 10:43:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 10:43:34 2013] Assessing source extent using major
[Sat Jun 22 10:43:34 2013] Source does appear to be extended
[Sat Jun 22 10:43:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 11:40:35 2013] Using EEF radius (= 12.77 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 11:40:35 2013] Initial guess for spatial extent in simple fitting = 12.77"
[Sat Jun 22 11:40:35 2013] source mask rpix=2.9, npix_max = 47, mask sum = 41, frac = 0.869
[Sat Jun 22 11:40:35 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 12.77"
[Sat Jun 22 12:15:19 2013] fullrun_mos2_xmm0021740101_pi300-10000_cl_pass1_src18.ximg exists
[Sat Jun 22 12:15:19 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0021740101_pi300-10000_cl_pass1_src18.csv
[Sat Jun 22 12:15:19 2013] fullrun_mos2_xmm0021740101_pi300-10000_cl_pass1_src18_1.ximg exists
[Sat Jun 22 12:15:19 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0021740101_pi300-10000_cl_pass1_src18.csv
[Sat Jun 22 12:15:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021740101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021740101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:15:20 2013] fullrun_mos2_xmm0021740101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sat Jun 22 12:15:20 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0021740101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sat Jun 22 12:15:20 2013] fullrun_mos2_xmm0021740101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sat Jun 22 12:15:20 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0021740101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sat Jun 22 12:15:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021740101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021740101_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:15:36 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.348418 pixels away
[Sat Jun 22 12:15:36 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 12:15:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 12:15:36 2013] Assessing source extent using major
[Sat Jun 22 12:15:36 2013] Source does appear to be extended
[Sat Jun 22 12:15:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 13:00:35 2013] XMMSAS src. selection expression = ellipse(37536.455811, 35734.506012, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 13:00:35 2013] Writing source region out to fullrun_mos2_xmm0021740101_pi300-10000_pass1_cl_src5_src.reg
[Sat Jun 22 13:00:35 2013] Extracting stamp from image fullrun_mos2_xmm0021740101_pi300-10000_cl_sm2.00.img.gz, (395, 374) - (470, 449)
[Sat Jun 22 13:00:35 2013] XMMSAS bgd. selection expression = annulus(37536.455811, 35734.506012, 1087.500000, 2175.000000, X, Y)
[Sat Jun 22 13:00:35 2013] Writing fullrun_mos2_xmm0021740101_pi300-10000_pass1_cl_src5.gif
[Sat Jun 22 13:07:47 2013] Mean detx,y = (15794.46, -5408.51) 
[Sat Jun 22 13:07:49 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 13:08:10 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 13:08:10 2013] Setting source spectrum file to fullrun_mos2_xmm0021740101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jun 22 13:08:10 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0021740101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Jun 22 13:27:36 2013] Not generating rmf since there are only 62 counts
[Sat Jun 22 13:27:36 2013] rmf not generated due to insufficient counts
[Sat Jun 22 13:29:13 2013] Updating aperture counts using extracted products
[Sat Jun 22 13:29:13 2013] Total counts from fullrun_mos2_xmm0021740101_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 158.00
[Sat Jun 22 13:29:13 2013] Total counts from fullrun_mos2_xmm0021740101_pi300-10000_pass1_cl_src5_bgd.pi.gz = 569.00
[Sat Jun 22 13:29:13 2013] Got source and background scale factors 998318.000000, 5099106.000000
[Sat Jun 22 13:29:13 2013] User source parameters:
  Position = (432.0, 411.3) = 9 39 3.94 36 3 52.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 46.6 +/- 13.6
  Background aperture counts = 111.4
  Rate = 0.001 +/- 0.0004

[Sat Jun 22 13:29:13 2013] Updating counts from extracted products
[Sat Jun 22 13:29:13 2013] Set source signif. to 46.60/10.55 = 4.42
[Sat Jun 22 13:29:14 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 13:29:14 2013] Using photon index=1.80, rate=0.00146, arf fullrun_mos2_xmm0021740101_pi300-10000_pass1_cl_src5.arf
[Sat Jun 22 13:29:14 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 13:29:14 2013] Updating source flux to 5.8e-14
[Sat Jun 22 13:29:21 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 13:29:27 2013] xmm0021740101/analysis//spectral/fullrun_mos2_xmm0021740101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete