[Fri Sep 23 22:15:13 2011] Detection parameters:
  Position = (287.9, 332.0) = 15 6 35.33 1 37 18.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 274.4 +/- 24.6
  Background counts = 70.6
  Rate = 0.03 +/- 0.002

[Fri Sep 23 22:15:13 2011] Off-axis axis estimate = 2.55'
[Fri Sep 23 22:17:00 2011] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 22:17:00 2011] Initial guess for spatial extent in simple fitting = 7.70"
[Fri Sep 23 22:17:00 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.776
[Fri Sep 23 22:17:00 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 7.70"
[Fri Sep 23 23:08:28 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_src9.ximg exists
[Fri Sep 23 23:08:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_src9.csv
[Fri Sep 23 23:08:28 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri Sep 23 23:08:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_src9.csv
[Fri Sep 23 23:08:28 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 23:08:28 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri Sep 23 23:08:28 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Sep 23 23:08:28 2011] Fit fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sat Sep 24 01:51:42 2011] Spatial fit model total counts = 1550.040000, observed total counts = 1559.000000
[Sat Sep 24 01:51:42 2011] Offset between fit and detection position for source 9 = 5.772123 pixels
[Sat Sep 24 01:51:42 2011] 1683.966000 total counts/ 1260.360000 bgd. counts: snr = 11.932043
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 5.772123 pixels
  Position = (282.3, 330.6) = 15 6 36.96 1 37 13.6
  Extent = 15.4 (15.3-30.8)", rotation angle = 0
  Source counts = 423.6 +/- 41.0
  Background counts = 1260.4
  Rate = 0.04 +/- 0.004
[Sat Sep 24 01:51:42 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 01:51:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 01:51:42 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 01:51:42 2011] Source does appear to be extended
[Sat Sep 24 01:51:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 01:51:42 2011] Source is confused with source 6
[Sat Sep 24 01:51:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 01:51:58 2011] Initial guess for spatial extent in simple fitting = 15.41"
[Sat Sep 24 01:51:58 2011] source mask rpix=3.5, npix_max = 65, mask sum = 35, frac = 0.536
[Sat Sep 24 01:51:58 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 15.41"
[Sat Sep 24 03:00:35 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_src9.ximg exists
[Sat Sep 24 03:00:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_src9.csv
[Sat Sep 24 03:00:35 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat Sep 24 03:00:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_src9.csv
[Sat Sep 24 03:00:35 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 03:00:35 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat Sep 24 03:00:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sat Sep 24 03:00:35 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Sep 24 03:00:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sat Sep 24 03:00:35 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 05:52:20 2011] Warning, spatial fit 9 centroid is now closest to src. 14
[Sat Sep 24 05:52:21 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 05:52:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 05:52:21 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 05:52:21 2011] Source does appear to be extended
[Sat Sep 24 05:52:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 05:52:41 2011] XMMSAS src. selection expression = ellipse(24513.152000, 28717.054000, 924.432027, 924.432027, 0.000000, X, Y)
[Sat Sep 24 05:52:41 2011] Writing source region out to fullrun_pn_xmm0021540501_pi300-10000_pass1_cl_src9_src.reg
[Sat Sep 24 05:52:41 2011] Extracting stamp from image fullrun_pn_xmm0021540501_pi300-10000_cl_sm2.00.img.gz, (229, 278) - (335, 384)
[Sat Sep 24 05:52:41 2011] XMMSAS bgd. selection expression = annulus(24513.152000, 28717.054000, 1540.720044, 3081.440089, X, Y) && !ellipse(26763.793915, 27696.457916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24142.192000, 29938.828000, 1274.936037, 1274.936037, 0.000000, X, Y) && !ellipse(27477.680000, 29394.535800, 1301.264037, 1301.264037, 0.000000, X, Y) && !ellipse(26120.196140, 29168.659260, 1241.680036, 1241.680036, 0.000000, X, Y) && !ellipse(26038.139893, 26315.840027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25500.138031, 30484.217438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27388.901978, 30459.939850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27430.895600, 29946.018000, 1347.056039, 1347.056039, 0.000000, X, Y) && !ellipse(27997.047058, 29436.593323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23949.523200, 27647.639800, 623.611218, 623.611218, 0.000000, X, Y) && !ellipse(25306.508740, 27437.170000, 2176.544063, 2176.544063, 0.000000, X, Y) && !ellipse(26755.167725, 25724.665894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27648.824036, 25711.688110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26156.259491, 25630.829193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27062.187347, 25083.303741, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Sep 24 05:52:41 2011] Writing fullrun_pn_xmm0021540501_pi300-10000_pass1_cl_src9.gif
[Sat Sep 24 05:57:30 2011] Mean detx,y = (-1539.68, -1561.55) 
[Sat Sep 24 05:57:33 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 05:57:52 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 05:57:52 2011] Setting source spectrum file to fullrun_pn_xmm0021540501_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Sep 24 05:57:52 2011] Setting bgd. spectrum file to fullrun_pn_xmm0021540501_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat Sep 24 09:32:20 2011] Updating aperture counts using extracted products
[Sat Sep 24 09:32:20 2011] Error reading totcts from fullrun_pn_xmm0021540501_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Sep 24 09:32:20 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 09:32:20 2011] Using photon index=1.80, rate=0.037, arf fullrun_pn_xmm0021540501_pi300-10000_pass1_cl_src9.arf
[Sat Sep 24 09:32:20 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 09:32:21 2011] Updating source flux to 1.3e-13
[Sat Sep 24 09:37:25 2011] Flag c found in src. 9 procflags, skipping spectral fitting