[Fri Sep 23 22:15:13 2011] Detection parameters:
  Position = (331.1, 300.5) = 15 6 22.80 1 34 57.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.4 +/- 15.8
  Background counts = 67.5
  Rate = 0.005 +/- 0.001

[Fri Sep 23 22:15:13 2011] Off-axis axis estimate = 2.37'
[Fri Sep 23 22:17:00 2011] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 22:17:00 2011] Initial guess for spatial extent in simple fitting = 7.62"
[Fri Sep 23 22:17:00 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.987
[Fri Sep 23 22:17:00 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 7.62"
[Fri Sep 23 23:08:28 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_src20.ximg exists
[Fri Sep 23 23:08:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_src20.csv
[Fri Sep 23 23:08:28 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri Sep 23 23:08:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_src20.csv
[Fri Sep 23 23:08:28 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 23:08:28 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri Sep 23 23:08:28 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri Sep 23 23:08:28 2011] Fit fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Sat Sep 24 01:51:42 2011] Spatial fit model total counts = 775.636000, observed total counts = 776.000000
[Sat Sep 24 01:51:42 2011] Offset between fit and detection position for source 20 = 6.794513 pixels
[Sat Sep 24 01:51:42 2011] 763.647000 total counts/ 660.861000 bgd. counts: snr = 3.998332
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 6.794513 pixels
  Position = (336.8, 296.8) = 15 6 21.15 1 34 46.3
  Extent = 15.2 (15.2-30.5)", rotation angle = 0
  Source counts = 102.8 +/- 27.6
  Background counts = 660.9
  Rate = 0.009 +/- 0.002
[Sat Sep 24 01:51:42 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 01:51:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 01:51:42 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 01:51:42 2011] Source does appear to be extended
[Sat Sep 24 01:51:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 01:51:42 2011] Source is confused with source 19
[Sat Sep 24 01:51:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 01:51:58 2011] Initial guess for spatial extent in simple fitting = 15.23"
[Sat Sep 24 01:51:58 2011] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.999
[Sat Sep 24 01:51:58 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 15.23"
[Sat Sep 24 03:00:35 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_src19.ximg exists
[Sat Sep 24 03:00:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_src19.csv
[Sat Sep 24 03:00:35 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat Sep 24 03:00:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_src19.csv
[Sat Sep 24 03:00:35 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 03:00:35 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat Sep 24 03:00:35 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Sep 24 03:00:35 2011] Fit fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sat Sep 24 05:52:21 2011] Source 20 is offset by -2.837310 and -3.194368 pixels which is larger than
2 X fitted extent = 1.732400 x 1.732400, not incorporating fit results
[Sat Sep 24 05:52:21 2011] Warning, spatial fit 19 centroid is now closest to src. 19
[Sat Sep 24 05:52:21 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 05:52:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 05:52:21 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 05:52:21 2011] Source does appear to be extended
[Sat Sep 24 05:52:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 05:52:41 2011] XMMSAS src. selection expression = ellipse(29253.640000, 25770.828000, 913.872026, 913.872026, 0.000000, X, Y)
[Sat Sep 24 05:52:41 2011] Writing source region out to fullrun_pn_xmm0021540501_pi300-10000_pass1_cl_src20_src.reg
[Sat Sep 24 05:52:41 2011] Extracting stamp from image fullrun_pn_xmm0021540501_pi300-10000_cl_sm2.00.img.gz, (284, 244) - (389, 349)
[Sat Sep 24 05:52:41 2011] XMMSAS bgd. selection expression = annulus(29253.640000, 25770.828000, 1523.120044, 3046.240088, X, Y) && !ellipse(26763.793915, 27696.457916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27477.680000, 29394.535800, 1301.264037, 1301.264037, 0.000000, X, Y) && !ellipse(26120.196140, 29168.659260, 1241.680036, 1241.680036, 0.000000, X, Y) && !ellipse(26038.139893, 26315.840027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27430.895600, 29946.018000, 1347.056039, 1347.056039, 0.000000, X, Y) && !ellipse(27997.047058, 29436.593323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28957.495941, 26569.496216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25306.508740, 27437.170000, 2176.544063, 2176.544063, 0.000000, X, Y) && !ellipse(26755.167725, 25724.665894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27648.824036, 25711.688110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26156.259491, 25630.829193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27062.187347, 25083.303741, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Sep 24 05:52:41 2011] Writing fullrun_pn_xmm0021540501_pi300-10000_pass1_cl_src20.gif
[Sat Sep 24 06:02:04 2011] Mean detx,y = (2092.80, 2222.80) 
[Sat Sep 24 06:02:06 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 06:02:21 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 06:02:21 2011] Setting source spectrum file to fullrun_pn_xmm0021540501_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat Sep 24 06:02:21 2011] Setting bgd. spectrum file to fullrun_pn_xmm0021540501_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sat Sep 24 09:32:20 2011] Updating aperture counts using extracted products
[Sat Sep 24 09:32:20 2011] Error reading totcts from fullrun_pn_xmm0021540501_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat Sep 24 09:32:21 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 09:32:21 2011] Using photon index=1.80, rate=0.00898, arf fullrun_pn_xmm0021540501_pi300-10000_pass1_cl_src20.arf
[Sat Sep 24 09:32:21 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 09:32:21 2011] Updating source flux to 2.1e-14
[Sat Sep 24 09:37:25 2011] Flag b found in src. 20 procflags, skipping spectral fitting
[Sat Sep 24 09:37:25 2011] Flag c found in src. 20 procflags, skipping spectral fitting