[Fri Sep 23 22:15:13 2011] Detection parameters:
  Position = (322.4, 338.9) = 15 6 25.34 1 37 45.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.4 +/- 18.3
  Background counts = 79.2
  Rate = 0.01 +/- 0.002

[Fri Sep 23 22:15:13 2011] Off-axis axis estimate = 3.41'
[Fri Sep 23 22:17:00 2011] Using EEF radius (= 8.13 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 22:17:00 2011] Initial guess for spatial extent in simple fitting = 8.13"
[Fri Sep 23 22:17:00 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.890
[Fri Sep 23 22:17:00 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 8.13"
[Fri Sep 23 23:08:28 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_src17.ximg exists
[Fri Sep 23 23:08:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_src17.csv
[Fri Sep 23 23:08:28 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri Sep 23 23:08:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_src17.csv
[Fri Sep 23 23:08:28 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 23:08:28 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri Sep 23 23:08:28 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Sep 23 23:08:28 2011] Fit fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sat Sep 24 01:51:42 2011] Warning, spatial fit 17 centroid is now closest to src. 7
[Sat Sep 24 01:51:42 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 01:51:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 01:51:42 2011] Assessing source extent using major
[Sat Sep 24 01:51:42 2011] Source does appear to be extended
[Sat Sep 24 01:51:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 01:51:42 2011] Source is confused with source 7
[Sat Sep 24 01:51:58 2011] Using EEF radius (= 8.13 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 01:51:58 2011] Initial guess for spatial extent in simple fitting = 8.13"
[Sat Sep 24 01:51:58 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.890
[Sat Sep 24 01:51:58 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 8.13"
[Sat Sep 24 03:00:35 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_src16.ximg exists
[Sat Sep 24 03:00:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_src16.csv
[Sat Sep 24 03:00:35 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_src16_1.ximg exists
[Sat Sep 24 03:00:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_src16.csv
[Sat Sep 24 03:00:35 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 03:00:35 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sat Sep 24 03:00:35 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sat Sep 24 03:00:35 2011] Fit fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Sat Sep 24 05:52:20 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 10.630595 pixels away
[Sat Sep 24 05:52:21 2011] Source 17 is offset by -3.795919 and 6.387624 pixels which is larger than
2 X fitted extent = 0.934814 x 0.934814, not incorporating fit results
[Sat Sep 24 05:52:21 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 05:52:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 05:52:21 2011] Assessing source extent using major
[Sat Sep 24 05:52:21 2011] Source does appear to be extended
[Sat Sep 24 05:52:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 05:52:41 2011] XMMSAS src. selection expression = ellipse(27997.047058, 29436.593323, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Sep 24 05:52:41 2011] Writing source region out to fullrun_pn_xmm0021540501_pi300-10000_pass1_cl_src17_src.reg
[Sat Sep 24 05:52:41 2011] Extracting stamp from image fullrun_pn_xmm0021540501_pi300-10000_cl_sm2.00.img.gz, (285, 301) - (360, 376)
[Sat Sep 24 05:52:41 2011] XMMSAS bgd. selection expression = annulus(27997.047058, 29436.593323, 1087.500000, 2175.000000, X, Y) && !ellipse(26763.793915, 27696.457916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27477.680000, 29394.535800, 1301.264037, 1301.264037, 0.000000, X, Y) && !ellipse(26120.196140, 29168.659260, 1241.680036, 1241.680036, 0.000000, X, Y) && !ellipse(25500.138031, 30484.217438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27388.901978, 30459.939850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27430.895600, 29946.018000, 1347.056039, 1347.056039, 0.000000, X, Y) && !ellipse(28957.495941, 26569.496216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25306.508740, 27437.170000, 2176.544063, 2176.544063, 0.000000, X, Y)
[Sat Sep 24 05:52:41 2011] Writing fullrun_pn_xmm0021540501_pi300-10000_pass1_cl_src17.gif
[Sat Sep 24 06:00:49 2011] Mean detx,y = (1637.44, -1569.20) 
[Sat Sep 24 06:00:50 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 06:01:11 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 06:01:11 2011] Setting source spectrum file to fullrun_pn_xmm0021540501_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Sep 24 06:01:11 2011] Setting bgd. spectrum file to fullrun_pn_xmm0021540501_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat Sep 24 07:33:51 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Sep 24 07:33:51 2011] rmf not generated due to insufficient counts
[Sat Sep 24 09:32:20 2011] Updating aperture counts using extracted products
[Sat Sep 24 09:32:20 2011] Error reading totcts from fullrun_pn_xmm0021540501_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Sep 24 09:32:21 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 09:32:21 2011] Using photon index=1.80, rate=0.0125, arf fullrun_pn_xmm0021540501_pi300-10000_pass1_cl_src17.arf
[Sat Sep 24 09:32:21 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 09:32:21 2011] Updating source flux to 3.2e-14
[Sat Sep 24 09:37:25 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting