[Fri Sep 23 22:15:13 2011] Detection parameters:
  Position = (308.2, 318.9) = 15 6 29.45 1 36 22.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5050.8 +/- 87.0
  Background counts = 77.7
  Rate = 0.4 +/- 0.007

[Fri Sep 23 22:15:13 2011] Off-axis axis estimate = 1.64'
[Fri Sep 23 22:17:00 2011] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 22:17:00 2011] Initial guess for spatial extent in simple fitting = 7.25"
[Fri Sep 23 22:17:00 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Fri Sep 23 22:17:00 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Fri Sep 23 23:08:28 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_src1.ximg exists
[Fri Sep 23 23:08:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_src1.csv
[Fri Sep 23 23:08:28 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Sep 23 23:08:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_src1.csv
[Fri Sep 23 23:08:28 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 23:08:28 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 23 23:08:28 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 23 23:08:28 2011] Fit fullrun_pn_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Sep 24 01:51:42 2011] Warning, spatial fit 1 centroid is now closest to src. 8
[Sat Sep 24 01:51:42 2011] Source 1 is offset by 2.115539 and 8.835815 pixels which is larger than
2 X fitted extent = 5.191310 x 5.191310, not incorporating fit results
[Sat Sep 24 01:51:42 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 01:51:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 01:51:42 2011] Assessing source extent using major
[Sat Sep 24 01:51:42 2011] Source does appear to be extended
[Sat Sep 24 01:51:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 01:51:58 2011] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 01:51:58 2011] Initial guess for spatial extent in simple fitting = 7.25"
[Sat Sep 24 01:51:58 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Sat Sep 24 01:51:58 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.25"
[Sat Sep 24 03:00:34 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_src1.ximg exists
[Sat Sep 24 03:00:34 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Sep 24 03:00:34 2011] Fit fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Sep 24 03:00:35 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Sep 24 03:00:35 2011] fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Sep 24 03:00:35 2011] Fit fullrun_pn_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Sep 24 05:52:20 2011] Warning, spatial fit 1 centroid is now closest to src. 17
[Sat Sep 24 05:52:20 2011] Source 1 is offset by -0.852668 and -5.146714 pixels which is larger than
2 X fitted extent = 4.175527 x 4.175527, not incorporating fit results
[Sat Sep 24 05:52:21 2011] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 16.890235 pixels away
[Sat Sep 24 05:52:21 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 05:52:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 05:52:21 2011] Assessing source extent using major
[Sat Sep 24 05:52:21 2011] Source does appear to be extended
[Sat Sep 24 05:52:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 05:52:21 2011] Source is confused with source 21
[Sat Sep 24 05:52:41 2011] Counts = 5050.800293, rescaling region sizes by 2.000000
[Sat Sep 24 05:52:41 2011] XMMSAS src. selection expression = ellipse(26763.793915, 27696.457916, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Sep 24 05:52:41 2011] Writing source region out to fullrun_pn_xmm0021540501_pi300-10000_pass1_cl_src1_src.reg
[Sat Sep 24 05:52:41 2011] Extracting stamp from image fullrun_pn_xmm0021540501_pi300-10000_cl_sm2.00.img.gz, (233, 244) - (383, 394)
[Sat Sep 24 05:52:41 2011] XMMSAS bgd. selection expression = annulus(26763.793915, 27696.457916, 4350.000000, 8700.000000, X, Y) && !ellipse(30706.977051, 33874.963318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35298.664368, 29710.021515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24142.192000, 29938.828000, 1274.936037, 1274.936037, 0.000000, X, Y) && !ellipse(27477.680000, 29394.535800, 1301.264037, 1301.264037, 0.000000, X, Y) && !ellipse(26120.196140, 29168.659260, 1241.680036, 1241.680036, 0.000000, X, Y) && !ellipse(24513.152000, 28717.054000, 1232.576035, 1232.576035, 0.000000, X, Y) && !ellipse(26038.139893, 26315.840027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25500.138031, 30484.217438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27388.901978, 30459.939850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27430.895600, 29946.018000, 1347.056039, 1347.056039, 0.000000, X, Y) && !ellipse(27997.047058, 29436.593323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23949.523200, 27647.639800, 623.611218, 623.611218, 0.000000, X, Y) && !ellipse(28957.495941, 26569.496216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29253.640000, 25770.828000, 1218.496035, 1218.496035, 0.000000, X, Y) && !ellipse(25306.508740, 27437.170000, 2176.544063, 2176.544063, 0.000000, X, Y) && !ellipse(26755.167725, 25724.665894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27648.824036, 25711.688110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26156.259491, 25630.829193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27062.187347, 25083.303741, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Sep 24 05:52:41 2011] Writing fullrun_pn_xmm0021540501_pi300-10000_pass1_cl_src1.gif
[Sat Sep 24 05:52:48 2011] Mean detx,y = (103.01, -42.52) 
[Sat Sep 24 05:52:51 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 05:54:06 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 05:54:07 2011] Setting source spectrum file to fullrun_pn_xmm0021540501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Sep 24 05:54:07 2011] Setting bgd. spectrum file to fullrun_pn_xmm0021540501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Sep 24 06:04:55 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Sep 24 06:04:55 2011] rmf not generated due to insufficient counts
[Sat Sep 24 09:32:20 2011] Updating aperture counts using extracted products
[Sat Sep 24 09:32:20 2011] Error reading totcts from fullrun_pn_xmm0021540501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Sep 24 09:32:20 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 09:32:20 2011] Using photon index=1.80, rate=0.415, arf fullrun_pn_xmm0021540501_pi300-10000_pass1_cl_src1.arf
[Sat Sep 24 09:32:20 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 09:32:20 2011] Updating source flux to 9.1e-13
[Sat Sep 24 09:37:25 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Sep 24 09:40:28 2011] xmm0021540501/analysis//spectral/fullrun_pn_xmm0021540501_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete