[Fri Sep 23 22:15:56 2011] Detection parameters:
  Position = (299.2, 343.0) = 15 6 32.07 1 38 3.2
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 116.0 +/- 15.1
  Background counts = 112.9
  Rate = 0.009 +/- 0.001

[Fri Sep 23 22:15:56 2011] Off-axis axis estimate = 3.23'
[Sat Sep 24 00:19:08 2011] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 00:19:08 2011] Initial guess for spatial extent in simple fitting = 8.04"
[Sat Sep 24 00:19:08 2011] source mask rpix=1.8, npix_max = 22, mask sum = 12, frac = 0.544
[Sat Sep 24 00:19:08 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 8.04"
[Sat Sep 24 01:51:37 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src7.ximg exists
[Sat Sep 24 01:51:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src7.csv
[Sat Sep 24 01:51:37 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src7_1.ximg exists
[Sat Sep 24 01:51:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src7.csv
[Sat Sep 24 01:51:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 01:51:37 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sat Sep 24 01:51:37 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Sep 24 01:51:37 2011] Fit fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sat Sep 24 01:51:50 2011] Source 34 is offset by 5.378355 and -6.888639 pixels which is larger than
2 X fitted extent = 0.924552 x 0.924552, not incorporating fit results
[Sat Sep 24 01:51:51 2011] Source 34 is offset by -5.358197 and 4.993982 pixels which is larger than
2 X fitted extent = 4.199016 x 4.199016, not incorporating fit results
[Sat Sep 24 01:51:51 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 01:51:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 01:51:51 2011] Assessing source extent using major
[Sat Sep 24 01:51:51 2011] Source does appear to be extended
[Sat Sep 24 01:51:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 01:51:51 2011] Source is confused with source 8
[Sat Sep 24 04:22:43 2011] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 04:22:43 2011] Initial guess for spatial extent in simple fitting = 8.04"
[Sat Sep 24 04:22:43 2011] source mask rpix=1.8, npix_max = 22, mask sum = 12, frac = 0.544
[Sat Sep 24 04:22:43 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 8.04"
[Sat Sep 24 05:52:13 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_src7.ximg exists
[Sat Sep 24 05:52:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_src7.csv
[Sat Sep 24 05:52:13 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat Sep 24 05:52:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_src7.csv
[Sat Sep 24 05:52:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 05:52:14 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat Sep 24 05:52:14 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat Sep 24 05:52:14 2011] Fit fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sat Sep 24 05:52:32 2011] Source 34 is offset by -3.834036 and -8.413259 pixels which is larger than
2 X fitted extent = 1.201798 x 1.201798, not incorporating fit results
[Sat Sep 24 05:52:32 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 05:52:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 05:52:32 2011] Assessing source extent using major
[Sat Sep 24 05:52:32 2011] Source does appear to be extended
[Sat Sep 24 05:52:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 08:55:46 2011] XMMSAS src. selection expression = ellipse(25977.992859, 29791.034424, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Sep 24 08:55:46 2011] Writing source region out to fullrun_mos2_xmm0021540501_pi300-10000_pass1_cl_src34_src.reg
[Sat Sep 24 08:55:46 2011] Extracting stamp from image fullrun_mos2_xmm0021540501_pi300-10000_cl_sm2.00.img.gz, (224, 268) - (374, 418)
[Sat Sep 24 08:55:46 2011] XMMSAS bgd. selection expression = annulus(25977.992859, 29791.034424, 2175.000000, 4350.000000, X, Y) && !ellipse(26700.768840, 27638.854400, 1255.280036, 1255.280036, 0.000000, X, Y) && !ellipse(27400.002655, 28500.034393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25808.327420, 29229.750000, 861.992025, 861.992025, 0.000000, X, Y) && !ellipse(28003.472000, 28365.060000, 1206.152035, 1010.744029, 231.215000, X, Y) && !ellipse(27715.778564, 27279.804169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25214.406000, 28029.917400, 1451.464042, 884.464025, 89.972887, X, Y) && !ellipse(25411.064453, 29096.303528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30656.728120, 33869.482400, 374.395567, 374.395567, 0.000000, X, Y) && !ellipse(28021.856000, 26296.968000, 1189.488034, 1189.488034, 0.000000, X, Y) && !ellipse(25342.118652, 26843.999695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24702.992035, 28123.168915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25808.594025, 26156.947144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24280.221100, 27694.477264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24519.197632, 28659.328186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26634.442000, 25155.246000, 1096.512032, 1096.512032, 0.000000, X, Y) && !ellipse(27731.862000, 29556.532000, 1263.208036, 1263.208036, 0.000000, X, Y) && !ellipse(28534.839172, 27788.223694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28793.006256, 28676.118591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26893.226593, 25628.158234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28723.588000, 25642.616000, 2115.776061, 2115.776061, 0.000000, X, Y)
[Sat Sep 24 08:55:46 2011] Writing fullrun_mos2_xmm0021540501_pi300-10000_pass1_cl_src34.gif
[Sat Sep 24 09:00:17 2011] Mean detx,y = (407.34, 1803.63) 
[Sat Sep 24 09:00:17 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 09:00:28 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 09:00:28 2011] Setting source spectrum file to fullrun_mos2_xmm0021540501_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sat Sep 24 09:00:28 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0021540501_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Sat Sep 24 09:10:08 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Sep 24 09:10:08 2011] rmf not generated due to insufficient counts
[Sat Sep 24 09:32:21 2011] Updating aperture counts using extracted products
[Sat Sep 24 09:32:21 2011] Error reading totcts from fullrun_mos2_xmm0021540501_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sat Sep 24 09:32:21 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 09:32:21 2011] Using photon index=1.80, rate=0.00876, arf fullrun_mos2_xmm0021540501_pi300-10000_pass1_cl_src34.arf
[Sat Sep 24 09:32:21 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 09:32:21 2011] Updating source flux to 8e-14
[Sat Sep 24 09:35:33 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting