[Fri Sep 23 22:15:56 2011] Detection parameters:
  Position = (309.7, 295.1) = 15 6 29.02 1 34 39.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.1 +/- 12.1
  Background counts = 21.1
  Rate = 0.003 +/- 0.0007

[Fri Sep 23 22:15:56 2011] Off-axis axis estimate = 0.85'
[Sat Sep 24 00:19:08 2011] Using EEF radius (= 6.85 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 00:19:08 2011] Initial guess for spatial extent in simple fitting = 6.85"
[Sat Sep 24 00:19:08 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.929
[Sat Sep 24 00:19:08 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 6.85"
[Sat Sep 24 01:51:37 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src31.ximg exists
[Sat Sep 24 01:51:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src31.csv
[Sat Sep 24 01:51:37 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src31_1.ximg exists
[Sat Sep 24 01:51:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src31.csv
[Sat Sep 24 01:51:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 01:51:38 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sat Sep 24 01:51:38 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sat Sep 24 01:51:38 2011] Fit fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Sat Sep 24 01:51:51 2011] Source 30 is offset by -4.082223 and -7.167767 pixels which is larger than
2 X fitted extent = 6.301793 x 6.301793, not incorporating fit results
[Sat Sep 24 01:51:51 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 01:51:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 01:51:51 2011] Assessing source extent using major
[Sat Sep 24 01:51:51 2011] Source does appear to be extended
[Sat Sep 24 01:51:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 01:51:51 2011] Source is confused with source 31
[Sat Sep 24 04:22:43 2011] Using EEF radius (= 6.85 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 04:22:43 2011] Initial guess for spatial extent in simple fitting = 6.85"
[Sat Sep 24 04:22:43 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.929
[Sat Sep 24 04:22:43 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 6.85"
[Sat Sep 24 05:52:14 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_src26.ximg exists
[Sat Sep 24 05:52:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_src26.csv
[Sat Sep 24 05:52:14 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_src26_1.ximg exists
[Sat Sep 24 05:52:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_src26.csv
[Sat Sep 24 05:52:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 05:52:14 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sat Sep 24 05:52:14 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sat Sep 24 05:52:14 2011] Fit fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Sat Sep 24 05:52:32 2011] Warning, spatial fit 26 centroid is now closest to src. 31
[Sat Sep 24 05:52:32 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 05:52:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 05:52:32 2011] Assessing source extent using major
[Sat Sep 24 05:52:32 2011] Source does appear to be extended
[Sat Sep 24 05:52:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 08:55:47 2011] XMMSAS src. selection expression = ellipse(26893.226593, 25628.158234, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Sep 24 08:55:47 2011] Writing source region out to fullrun_mos2_xmm0021540501_pi300-10000_pass1_cl_src30_src.reg
[Sat Sep 24 08:55:47 2011] Extracting stamp from image fullrun_mos2_xmm0021540501_pi300-10000_cl_sm2.00.img.gz, (272, 258) - (347, 333)
[Sat Sep 24 08:55:47 2011] XMMSAS bgd. selection expression = annulus(26893.226593, 25628.158234, 1087.500000, 2175.000000, X, Y) && !ellipse(26700.768840, 27638.854400, 1255.280036, 1255.280036, 0.000000, X, Y) && !ellipse(27400.002655, 28500.034393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28003.472000, 28365.060000, 1206.152035, 1010.744029, 231.215000, X, Y) && !ellipse(27715.778564, 27279.804169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25214.406000, 28029.917400, 1451.464042, 884.464025, 89.972887, X, Y) && !ellipse(28021.856000, 26296.968000, 1189.488034, 1189.488034, 0.000000, X, Y) && !ellipse(25342.118652, 26843.999695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24702.992035, 28123.168915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25808.594025, 26156.947144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24280.221100, 27694.477264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24519.197632, 28659.328186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26634.442000, 25155.246000, 1096.512032, 1096.512032, 0.000000, X, Y) && !ellipse(28534.839172, 27788.223694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28723.588000, 25642.616000, 2115.776061, 2115.776061, 0.000000, X, Y)
[Sat Sep 24 08:55:47 2011] Writing fullrun_mos2_xmm0021540501_pi300-10000_pass1_cl_src30.gif
[Sat Sep 24 09:02:36 2011] Mean detx,y = (318.05, -1994.05) 
[Sat Sep 24 09:02:37 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 09:02:42 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 09:02:42 2011] Setting source spectrum file to fullrun_mos2_xmm0021540501_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat Sep 24 09:02:42 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0021540501_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sat Sep 24 09:17:37 2011] Not generating rmf since there are only 55 counts
[Sat Sep 24 09:17:37 2011] rmf not generated due to insufficient counts
[Sat Sep 24 09:32:21 2011] Updating aperture counts using extracted products
[Sat Sep 24 09:32:21 2011] Error reading totcts from fullrun_mos2_xmm0021540501_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat Sep 24 09:32:22 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 09:32:22 2011] Using photon index=1.80, rate=0.00324, arf fullrun_mos2_xmm0021540501_pi300-10000_pass1_cl_src30.arf
[Sat Sep 24 09:32:22 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 09:32:22 2011] Updating source flux to 3.3e-14
[Sat Sep 24 09:35:33 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting