[Fri Sep 23 22:15:56 2011] Detection parameters:
  Position = (288.9, 302.0) = 15 6 35.05 1 35 9.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.0 +/- 13.4
  Background counts = 21.7
  Rate = 0.005 +/- 0.0008

[Fri Sep 23 22:15:56 2011] Off-axis axis estimate = 0.74'
[Sat Sep 24 00:19:08 2011] Using EEF radius (= 6.80 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 00:19:08 2011] Initial guess for spatial extent in simple fitting = 6.80"
[Sat Sep 24 00:19:08 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.940
[Sat Sep 24 00:19:08 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 6.80"
[Sat Sep 24 01:51:37 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src20.ximg exists
[Sat Sep 24 01:51:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src20.csv
[Sat Sep 24 01:51:37 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src20_1.ximg exists
[Sat Sep 24 01:51:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src20.csv
[Sat Sep 24 01:51:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 01:51:37 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sat Sep 24 01:51:37 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sat Sep 24 01:51:37 2011] Fit fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Sat Sep 24 01:51:50 2011] Spatial fit model total counts = 542.217000, observed total counts = 540.000000
[Sat Sep 24 01:51:50 2011] Offset between fit and detection position for source 28 = 0.304967 pixels
[Sat Sep 24 01:51:50 2011] 570.375900 total counts/ 553.437000 bgd. counts: snr = 0.720031
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.304967 pixels
  Position = (288.8, 301.7) = 15 6 35.07 1 35 7.6
  Extent = 2.5 (1.7-4.9)", rotation angle = 0
  Source counts = 16.9 +/- 23.9
  Background counts = 553.4
  Rate = 0.001 +/- 0.001
  Deleting source due to low Poisson probability